How to Replace Rear Upper Control Arm 2003-2011 Honda Element

Поделиться
HTML-код
  • Опубликовано: 7 сен 2024
  • Buy Now!
    New Control Arm Set from 1AAuto.com 1aau.to/ib/1ASF...
    New Control Arm from 1AAuto.com 1aau.to/ia/1ASR...
    This video shows you how to install new control arms in your 2003-2011 Honda Element. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
    This repair was done on a 2005 Honda Element EX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
    2003 Honda Element
    2004 Honda Element
    2005 Honda Element
    2006 Honda Element
    2007 Honda Element
    2008 Honda Element
    2009 Honda Element
    2010 Honda Element
    2011 Honda Element
    Tools you will need:
    • Phillips Head Screwdriver 1aau.to/oa6o/1A...
    • 17mm Wrench 1aau.to/oNh/1AX...
    • 17mm Socket 1aau.to/oa8E/1A...
    • 18mm Socket
    • 19mm Socket
    • 8mm Socket 1aau.to/oaQY/1A...
    • Adjustable Wrench
    • Needle nose pliers 1aau.to/oyJ/1AX...
    • Needle nose pliers 1aau.to/oyJ/1AX...
    • 1/2 Inch Impact Gun 1aau.to/ooL/1AX...
    • 3/8 Inch Impact Gun
    • Ratchet 1aau.to/objr/1A...
    • Torque Wrench 1aau.to/oapz/1A...
    • Floor Jack 1aau.to/oSz/1AX...
    • Hammer
    • Jack Stands 1aau.to/oMA/1AX...
    • Pole Jack
    • Punch
    Subscribe: / @trq
    Check out our playlist:
    Honda Element 1st Generation 2003-2011: • Honda Element 1st Gene...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 13