If you just cut all of the way through the metal past the hasp the lock will come right off without having to even cut the hasp super easy he made this A LOT HARDER
I had a similar situation now, 6 years later. I decided it was cheaper and easier and a LOT faster to just cut the latch. Replacement for the latch is going to be about $5 and the lock is $18. It took about 30 seconds to cut the latch. Each situation is a little different, but your video made it easy for me to choose which item to cut. Thanks!
I made this just to show cutting that style lock can be done with a dremel. On a shed definitely easier to take the latch off or cut it. I cut these locks several times a month on storage units. Damaging the latch isn’t an option. I use a 20v angle grinder though
@@russej02 Mine was on a cargo shipping container and I went ahead and discussed it with the owner before proceeding. This was my first and hopefully last. :) Your rec of the angle grinder was spot on!
love to see how the dewalt angle grinder works on this. my unit along with 10 other just got hit. It looks with the right tools it wouldn't take long to open all 10 units.
Well, I don't think you can take those off with a screwdriver, but that's also just a less helpful video. My last storage unit had two bolts that you could remove with a wrench and two that had round domes that you wouldn't be able to get any purchase on with a wrench or a screwdriver. I assume most storage places don't have hasps you can just remove with a screwdriver.
Hey thanks so much for this. I was lost on how to get mine off thinking I needed to cut the hasp itself. Never occurred to me to cut into the body. Again, Thanks.
Yes this was very helpful. I have arthritis. Watching your strong young male hands struggle with it....I knew I will need an angle grinder. Hope I can handle one. Love your generosity. Ppl missed that. ❤❤❤
I haven't read the comments, someone else might have thought of this, but wouldn't it be easier to unscrew the deadbolt, slide the lock off, screw the deadbolt back on?
"If you miss and knick their stuff they'll charge you for it." All those sparks will burn the paint and cause rust. Not all latches are they same but mine bend easy, another cost.
Anthony Thorp yep. I pick them whenever I can. When that isn’t an option I use a 4 and half inch cut off wheel on an angle grinder. I just wants to show people it can be done with a dremel
Arthur Trella nope, best bet is to go with a storage unit indoors or that has great security. Locks keep an honest person out, almost all locks can be cut or picked in about a minutes time
Watch the Lock Picking Lawyer and you will find out there are no locks that can’t be defeated. The difference is defeated by who and how long it takes. Stay away from locks at the big box stores. Military type padlocks for ammunition are in the most secure type he has shown.
@@russej02...Jesus,folks are just such problem solvers. Americans are so assuming that they know something before they even collect all the information. That's why our government will always suck...people don't think.
Will this work with the Disc lock "Defence brand"? psycho roommate stole my keys at storage unit and I'm desperate to get my Stuff in storage that is left from all she has stolen
yep. I'll cut any of them. problem is there usually isnt anywhere to plug into so you need a battery operated one and probably two batteries and a few cut off wheels
I know this is not valid given the video is Dremel instructions. Having said that if there is an easier visible option for access to this specific space; I feel like it should be mentioned . To get past this specific lock... Ignore the pad lock and cutting tool, simple flat head screwdriver with some elbow grease would romve the brace retaining the bolt on the door (left side)
This comment cracks me up every time someone leaves it. The point of the video is cutting the lock with a tool someone might have not me getting into my shed.
Nah.....Vise Grips. The correct tool always makes the job easier. Be prepared and carry extra wheels,a special wrench for changing wheels if you break one,Needle nose pliers, a chisel and a hammer. Better to have it and not need it....etc.
I prefer channel lock pliers. If I need to adjust the grip or angle of the tool, or the lock in relation to the storage unit hasp, it is much easier to do with channel locks than with vise grips, where I have to unclamp it, adjust, then reclamp it to continue cutting, notwithstanding that the lock will also get extremely hot. I also cut from both sides. I normally cut about 3 of these off each month, since they have very small keyways, are sometimes installed backwards, so yhey don't always pick easily. Also, a dust mask is a must.
Every circular disc lot can be picked under 10 secs flat using paperclip I've a collection of 60 such lock of all brands price range WTF was that all about lol
You do know there are screws that are accessible On the outside of your lock Mechanism or latch that you could just unscrew it just saying I mean I know you’re just demonstrating how to cut a lock but I was just thought I’d point out that you can just unscrew the screws and get into your storage or your shed or whatever that is because they’re on the outside not the inside. And you could just simply use the screwdriver or a wrench and unscrew those screws.
I was trying to show that a dremel can cut one of these locks. I wasn’t actually lock out of my shed. I should of just put the lock in a vise but then I’m sure I’d get comments about that too.
@@russej02 you know what..... I watched it again..... Nothing makes sense, the door is damaged, took an hour... Go to home depot but grinder and save time. Thanks
What do you have baby kittens locked inside that goddamned thing???? Yes I suggest that you got this lock off and you feed those little cats or what ever is going down there . Are you that inept or you just having a little bit of unexpected Unsmoothness??? Plus I'm becoming concerned about those crying cats.
@@russej02 Sir it was supposed to be laughable , cause the background noise is similar . I guess we got carried away with it . Sorry. It was a good joint we smoked earlier Ha. Adios mate , no worries .
@@russej02 My lock was faced the other way(keyhole on the left) and I cut into it right where you said and it took not 30 seconds to fall off. I used my Dewalt cordless grinder and I taped aluminum foil to the door so I didn't burn anything. ha.
Storage operator here...Anybody who breaks a key off can just use the access pinhole on the back of the lock to push a straightened paperclip thru...this pushes out the broke part of the key. You guys been crackin me up for years haha.
If you just cut all of the way through the metal past the hasp the lock will come right off without having to even cut the hasp super easy he made this A LOT HARDER
I was cutting the lock not the hasp. I’m doing this again with the tool I use working. Subscribe so you see it when it post
I had a similar situation now, 6 years later. I decided it was cheaper and easier and a LOT faster to just cut the latch. Replacement for the latch is going to be about $5 and the lock is $18. It took about 30 seconds to cut the latch. Each situation is a little different, but your video made it easy for me to choose which item to cut. Thanks!
I made this just to show cutting that style lock can be done with a dremel. On a shed definitely easier to take the latch off or cut it. I cut these locks several times a month on storage units. Damaging the latch isn’t an option. I use a 20v angle grinder though
@@russej02 Mine was on a cargo shipping container and I went ahead and discussed it with the owner before proceeding. This was my first and hopefully last. :) Your rec of the angle grinder was spot on!
@@OneWildTurkey cuts them like butter lol
love to see how the dewalt angle grinder works on this. my unit along with 10 other just got hit. It looks with the right tools it wouldn't take long to open all 10 units.
cuts them like butter in a few seconds. especially if you dont care about damaging he door or hasp. it would go even faster
Why dont you just get screwdriver and take the lock off that way, unscrew the two screws and slide it off the hasp. :) easy fix.
I should of thought of that! damn it lol
@@russej02 lol
😂😂😂😂 Was thinking the same
It's more fun with a Dremel.
Well, I don't think you can take those off with a screwdriver, but that's also just a less helpful video. My last storage unit had two bolts that you could remove with a wrench and two that had round domes that you wouldn't be able to get any purchase on with a wrench or a screwdriver. I assume most storage places don't have hasps you can just remove with a screwdriver.
Thank you.. I've got 10 disc locks to cut off, so I appreciate your video Bro🙏💯
Glad it helped! Angle grinder with cut off disc is faster but it’s definitely doable with a dremel
@@russej02 I ended up using angle grinder with cutting discs and it cut like butter..
@@wes365 that’s what I do in the field too.
Hey thanks so much for this. I was lost on how to get mine off thinking I needed to cut the hasp itself. Never occurred to me to cut into the body. Again, Thanks.
glad it helped!
Yes this was very helpful. I have arthritis. Watching your strong young male hands struggle with it....I knew I will need an angle grinder. Hope I can handle one. Love your generosity. Ppl missed that. ❤❤❤
I haven't read the comments, someone else might have thought of this, but wouldn't it be easier to unscrew the deadbolt, slide the lock off, screw the deadbolt back on?
Pam Brown yes except doing that wouldn’t show that you can cut one of these locks with a dremel which was the point of the video.
@@russej02 sorry! :) just surfing and trying to find a solution to getting a lock off my army trunk! Lost my key.
Pam Brown e-mail me a pic of I’m a locksmith theboredlockpicker@gmail.com
"If you miss and knick their stuff they'll charge you for it."
All those sparks will burn the paint and cause rust. Not all latches are they same but mine bend easy, another cost.
Anthony Thorp yep. I pick them whenever I can. When that isn’t an option I use a 4 and half inch cut off wheel on an angle grinder. I just wants to show people it can be done with a dremel
Are you aware of any heavy duty pad locks that can't be cut off with a grinder or Dremel tool? Need one for my storage unit
Arthur Trella nope, best bet is to go with a storage unit indoors or that has great security. Locks keep an honest person out, almost all locks can be cut or picked in about a minutes time
Mul-T-Lock brand Padlocks are insanely strong and it would take probably 50 of these blades to get through and like an hour or two
.
Watch the Lock Picking Lawyer and you will find out there are no locks that can’t be defeated. The difference is defeated by who and how long it takes. Stay away from locks at the big box stores. Military type padlocks for ammunition are in the most secure type he has shown.
Thank you for this video locked myself out lost the key
Right here www.amazon.com/dp/B000FBLRVA/ref=cm_sw_r_as_gl_api_gl_i_Z4JVTM5BSBV76143VW1D?linkCode=ml2&tag=boredlockpick-20
Thanks for your helpful demo!
billeybop no worries. Thanks for checking it out
It would be a lot easier to just take the screws off the latch in this case
Or just use the key. Except doing that doesn’t show cutting it with a dremel tool.
That looks like a flathead screw bolt on the storage door locking hasp, why not just unscrew that and slide the lock right off?
How would that show that a Dremel can cut these locks?
@@russej02...Jesus,folks are just such problem solvers. Americans are so assuming that they know something before they even collect all the information.
That's why our government will always suck...people don't think.
So which padlock should purchase to protect house
Unfortunately they all can be cut.
It took so long because you're attacking the locks hard points (ie, the types of attacks it is designed to survive).
Watch the lock pick lawyer.
Corvus Crow also using the wrong tool. I use a 20v angle grinder. Takes a few seconds
@@russej02 - Now a few seconds you can't argue with. 👍👌
Corvus Crow just made this video to show people they can do it with tools they might have laying around.
@@russej02- Yeah man, keep going. Don't mind me. 👍👍
Hello. Any chance could share the link of the video you saying plz?
Ive cut 100's
cut at 3oclock point with key facing you always!!!!
Nice!
Or remove the bolts and slide off?
you missed the whole point of the video but thank you for the comment
Will this work with the Disc lock "Defence brand"? psycho roommate stole my keys at storage unit and I'm desperate to get my Stuff in storage that is left from all she has stolen
yep. I'll cut any of them. problem is there usually isnt anywhere to plug into so you need a battery operated one and probably two batteries and a few cut off wheels
Nice work!
thanks man
Omg just unscrew the hinges 2 years later.
How does that show cutting the lock off with a dremel? Did you even watch the video?
i am wondering if drilling their the lock cylinder will be faster safer method of opening lock?
yea it is if you can get to the cylinder. some times they're locked against the wall at the storage places though
I know this is not valid given the video is Dremel instructions. Having said that if there is an easier visible option for access to this specific space; I feel like it should be mentioned . To get past this specific lock... Ignore the pad lock and cutting tool, simple flat head screwdriver with some elbow grease would romve the brace retaining the bolt on the door (left side)
This comment cracks me up every time someone leaves it. The point of the video is cutting the lock with a tool someone might have not me getting into my shed.
😂 You weren't paying attention.
You know would’ve been funny? If he kept the tools that he used in that shed.
Ive actually unlocked a couple vehicles that had car lockout tools locked in them lol
That's the story of my life....Life LOVES to fugg me over.
Why attack the lock? That cutting tool would have went right through that metal rod and or the latch.
Because you don’t want to have to replace the latch
You should use a pair of channel lock pliers to hold the lock
good idea.
Nah.....Vise Grips.
The correct tool always makes the job easier. Be prepared and carry extra wheels,a special wrench for changing wheels if you break one,Needle nose pliers, a chisel and a hammer. Better to have it and not need it....etc.
I prefer channel lock pliers. If I need to adjust the grip or angle of the tool, or the lock in relation to the storage unit hasp, it is much easier to do with channel locks than with vise grips, where I have to unclamp it, adjust, then reclamp it to continue cutting, notwithstanding that the lock will also get extremely hot. I also cut from both sides. I normally cut about 3 of these off each month, since they have very small keyways, are sometimes installed backwards, so yhey don't always pick easily. Also, a dust mask is a must.
Every circular disc lot can be picked under 10 secs flat using paperclip I've a collection of 60 such lock of all brands price range WTF was that all about lol
Unless they’re locked against the wall where you can’t get to the keyway
Point taken but still look at him if he was b/e old bill would be sitting howling see who was first to claim there grand on dumb f**ks
You could’ve just removed the door hardware.
And that shows that you can cut these with a dremel how?
But after further review, this lock was suppose to be on storage locker, so my suggestion would not work
.
You made that look wayyy more complicated, & time consuming...then it actually is!🙄
However, it's still a decent, & informative video though...👍
Was just trying to show that a dremel can do it. In real life I use a 20v angle grinder. Takes about 30 seconds.
You do know there are screws that are accessible On the outside of your lock Mechanism or latch that you could just unscrew it just saying I mean I know you’re just demonstrating how to cut a lock but I was just thought I’d point out that you can just unscrew the screws and get into your storage or your shed or whatever that is because they’re on the outside not the inside. And you could just simply use the screwdriver or a wrench and unscrew those screws.
I was trying to show that a dremel can cut one of these locks. I wasn’t actually lock out of my shed. I should of just put the lock in a vise but then I’m sure I’d get comments about that too.
Oh brother....derr!
Que dremel es ese ?
It's a radio shack brand rotary tool.
I simply take a grinder and cut it off in the middle..... maybe 5 mins.
You over think it bro.....
Dremel is too slow and small...
You missed the point of the video
@@russej02 sorry.
Please enlighten me.
TheMelalg was showing it’s possible to use a dremel. I use a 20v angle grinder working. 2-3 minutes tops to cut one. Not everyone has one though
@@russej02
Understand, thanks!
Although I must say.... grinders are really cheap today, make sure you got one, for whatever or whenever.... :)
@@russej02 you know what..... I watched it again.....
Nothing makes sense, the door is damaged, took an hour...
Go to home depot but grinder and save time.
Thanks
What do you have baby kittens locked inside that goddamned thing????
Yes I suggest that you got this lock off and you feed those little cats or what ever is going down there .
Are you that inept or
you just having a little bit of unexpected
Unsmoothness???
Plus I'm becoming concerned about those crying cats.
I think you have comprehension problems. Watch it again and get back to me.
@@russej02
Sir it was supposed to be laughable , cause the background noise is similar .
I guess we got carried away with it . Sorry.
It was a good joint we smoked earlier Ha.
Adios mate , no worries .
Thanks. That was perfect! I have a similar issue. I know how to do it now.
Angle grinder is easier but this will definitely work.
What a nice job 👏
Thank you
I just broke the key off in mine and wanted to nuke the entire facility to get the lock off. Thanks for this video.
glad it helped man!
@@russej02 My lock was faced the other way(keyhole on the left) and I cut into it right where you said and it took not 30 seconds to fall off. I used my Dewalt cordless grinder and I taped aluminum foil to the door so I didn't burn anything. ha.
@@Tomnician nice work man! in the field I used a dewalt 20v angle grinder too. works great!
Storage operator here...Anybody who breaks a key off can just use the access pinhole on the back of the lock to push a straightened paperclip thru...this pushes out the broke part of the key. You guys been crackin me up for years haha.
Good advice.
Should have a disel since they sell the lock
U
.
Lol this is funny
thanks for the kind words
wrong side buddy, U could to it 5 times faster. u a roocky
Dima Dovnikov so go on the bottom and cut up with the wheel spinning the wrong way to do it. Got it. Dumbass
Nice work!
HelpfulLockPicker thanks dude. Want to do this again with the angle grinder
russej02 That would be a lot easier for sure. I can't wait for someone to suggest you pick it tensioning that looks like a real pain from that angle.
+HelpfulLockPicker it was. I got the lock from picking off a unit working.