Thanks for the sub!, the hinge is a large barn door hinge i had kicking around, the ones that are rectangle on one side and a long triangle on the other
Could you tell me how wide and long is the piece that you work on the beam to flesh so I get it right ..I only like to know from the top to the end before start wide again ...I thank you very much..I subscribed to your channel a few years ago ..Good video
I just got into trapping and love the portability. Couple questions. Whats the thickness of the plywood and type? Is that basic strapping to hold the 2x10 riser in place. Is it tight between the strapping on the fleshing beam or some wiggle room? What screws screws secure it in place? thanks
it's standard 3/4 plywood on the base, i used a piece of 1.5 x 1.5 square for the blocks to hold the riser and i kept it as snug as possible, i used green deck screws to hold everything in place. hope this helps
Good evening I enjoyed your fleshing Beams I do skullwork iam now do taxidermist could u send me the size of your fleshing Beams thank u [ Shane Revette ] Revette's Wildlife Skullworks like the make of it
Thank you from Sweden. Im gonna make myself one of these for my boar hides
Well done ! I like the design of that fleshing board ! Thanks for sharing
Thanks for watching!
you come up with the greatest ideas
Thanks, and thanks for watching
Real nice board! I need to make one.
I love this one, works like a charm so far...for the first ten years or so anyway
Awesome setup bud! You did a great job designing the fleshing board 🙂👏👏👍
Thanks a bunch!
I am new to fleshing/tanning. Would you give the design of your setup with measurements. Please and Thank you.
Good idea!!
Just like to know the lengths of your fleshing beam. I'm making my own and I like your design.
the board is 6 foot 6
Awesome setup sir. What type of hinge did you have on the end of your beam ! Your channel has great content. I subscribed quite a long time ago.
Thanks for the sub!, the hinge is a large barn door hinge i had kicking around, the ones that are rectangle on one side and a long triangle on the other
How did you shape that beam? Looks like you did a great job
Could you tell me how wide and long is the piece that you work on the beam to flesh so I get it right ..I only like to know from the top to the end before start wide again ...I thank you very much..I subscribed to your channel a few years ago ..Good video
Also what kind of beam do you use for fleshing beaver
i use the same beam for beaver
I just got into trapping and love the portability. Couple questions. Whats the thickness of the plywood and type? Is that basic strapping to hold the 2x10 riser in place. Is it tight between the strapping on the fleshing beam or some wiggle room? What screws screws secure it in place? thanks
it's standard 3/4 plywood on the base, i used a piece of 1.5 x 1.5 square for the blocks to hold the riser and i kept it as snug as possible, i used green deck screws to hold everything in place. hope this helps
Man i love flashing
I like your beam.
me too , seems to work well
@@NBWildman mine just like yours except no hignes
Nice!
Thank you! Cheers!
Do you do anything to treat the wood? Like oil? Or do you leave it raw?
I leave it raw, the oil and fat from the animals treats it very quickly and better than any commercial product
@@NBWildman copy that. Thanks for the reply.
What is the width and thickness of the board. Thanks in advance.
Good evening I enjoyed your fleshing Beams I do skullwork iam now do taxidermist could u send me the size of your fleshing Beams thank u [ Shane Revette ] Revette's Wildlife Skullworks like the make of it
👍
thanks for the visit