FixaCrash - Removing the Mavic Pro Gimbal
HTML-код
- Опубликовано: 21 авг 2024
- This tear-down will show how to remove the Mavic Pro Gimbal/Camera Assembly.
If you need any of these parts, please contact us at help@fixacrash.com, and we'll try to help you out. Happy flying!
With this video, you will be able to:
Remove the top cover
Remove the GPS
Remove the gimbal assembly
The tools used are: PH0, 1.5mm Hex, Pry tool, precision tweezers
Product link to the driver I use: amzn.to/2DN6lY2
To see a teardown of the Gimbal Assembly, check out this next link here: • FixaCrash - Mavic Pro...
This was a very clear and concise video with excellent view of each step. As others have commented, this young lady did a top notch on this step-by-step disassembly video. Congratulations and keep up the great work!
This is the best teardown of a mavic pro gimbal I have seen, and I think I must have seen most of them by now. I have watched your other video and it is of the same high quality. If you keep posting videos of this qualify I believe you will end up with a very high number of subscribers. Best of luck young lady. :-)
sorry to be off topic but does any of you know a method to log back into an instagram account??
I was stupid forgot my login password. I appreciate any assistance you can give me!
@Matteo Zeke instablaster ;)
@Cohen Peyton thanks so much for your reply. I got to the site on google and im trying it out now.
Seems to take quite some time so I will reply here later with my results.
@Cohen Peyton It worked and I finally got access to my account again. I'm so happy!
Thank you so much you saved my ass!
@Matteo Zeke no problem :D
Awesome tear down. I really liked how you didn’t waste my time watching You unscrew the screws. So many others waste the time showing that. You rock.
Absolute gem, you have turned a gibbering wreck into an engineer. My wife stood behind me all the way biting her nails.
And she never lets me touch ANYTHING!!
That's how good the instructions are.
Made me laugh, thank you haha. Glad to hear your repair went well!
You video is A M A Z I N G. You're explanations are spot-on. Your imagery is excellent. The tempo is perfect. I watched your video about four times before starting the project. Then I played and paused the video as I did the work. Only one thing would have made it better. I wish you did a ribbon cable install after showing the ribbon cable removal. Reassembling the drone itself is easy enough to follow by watching the video segments in reverse. But the ribbon cable install is hard to visualize backward. And clamping down the tiny connectors isn't as easy as removing them. Some pointers on reattaching the connectors might be nice too. Thank you so much for doing such a fantastic video. You saved me hundreds of dollars!
Hi Scott, thank you for your stellar comment! I am hoping to publish more in the future, I just have a lot on my plate right now. And I agree, a ribbon install would've been great. As it turns out, when I published this video, there were still no parts available for the Mavic, even though it had been out for months! Maybe I'll post one in the future.
Really great video. Well made, clear and no unnecessary steps. I'd say, it's the best here on youtube for the disassembly of the MAVIC drone.
Thank you! Happy flying!
Excellent video, took my gimbal out in 10 minutes and reinstalled the new one and it worked perfectly!! Thanks for all the help!
You are the BEST. Saved me a major headache. DJI makes it so difficult to tighten some screws on my gimbal assembly! lol
Excellent video Anita, and I compliment you on your precise clear method of delivery. Its a pleasure to see a quality teardown video that is directed at the user . Keep them coming.
Hi there, I came here and watched your video and was thinking on what to write to thank you, @Chris Happy down here wrote everything I wanted to say to you so I will just quote him again "This is the best teardown of a mavic pro gimbal I have seen, and I think I must have seen most of them by now. I have watched your other video and it is of the same high quality. If you keep posting videos of this qualify I believe you will end up with a very high number of subscribers. Best of luck young lady. :-)"
I am already following you now!! Keep going with the good work!!
Cheers and thank you so much!
Jorge Campos thank you! 😄
Wow!!!!! Great video. Just a real treat and now I feel real confident in performing this repair myself. Thank you!!
Great job walking me through my crash repair, really appreciated your work! Now I plan to gps fly to try and mitigate my "piloting skills"
Thank you for your help. I was able to follow your instructions and find out that the ribbon cable was snapped. You’re very skilled.
Please make more of this! This is really helping
Well, heh heh, after trying to fly my Mav with an iPhone 6 strapped to its back (had a SEEK Thermal camera attached to it), experienced an EPIC crash just a few minutes later...which popped the Mav’s eye out. Your video was most helpful in removing that “eye”. Thanks much!
Excellent video and walkthrough. Very clear. Give Anita a bonus! THANK YOU!
Excellent video Anita, thanks for sharing. I need to replace the Gimbal Vibration Absorbing Board and for all they are available on Amazon also and look to have the bands included. For anyone touched a DJI you would know they put blue Loctite on some of the screws as a threadlocker. If you can't put it back together in reverse order then send yours out for repair cause you probably can't do this yourself.
FixaCrash, thanks to much for making this excellent video. Thanks to it, I was able to replace my anti-vibration plate and get flying in short order! I appreciate it. And I've been able to share your video with others in similar broken plate/cable predicament. :-)
Thank you so much for helping me disassemble my Mavic. I have a bad camera ribbon but I don't have a screw driver set small enough for the camera screws. Best Mavic video on RUclips.
Great tutorials! please dont stop doing them!
Hi Anita, following up from about 2 months ago, thanks to your step by step excellent video, I managed to replace the camera cable and the anti vibration plate. It all cost me AU$70.00 instead of up to $400.00 as quoted by a DJI technician. Thanks again and best Regards, Ben.
Hi Ben, great work! That's awesome, glad your Mavic is back up, and inexpensively at that. Happy flying! 🔧✈️
Hi Anita, followed your two video's to replace the gimbal plate, very helpful, thank you for your help.
Happy flying!
Good night 🌙
Great work and I agree, most concise and visually descriptive video currently on the subject. Well done.
Very informative. Thank you for taking the time to do this and to share it. One suggestion though, please do not use auto exposure on your camera. Please set the exposure manually and leave it. Every time you move the image readjusts the brightness, which distracts from your otherwise excellent presentation.
Thank you for the info :)
Thanks for this wonderful practical video. It just helped me replace the plastic hook holding the gimbal base plate. All in all not too much effort using this video. Happy flying !
Awesome video . you go girl!! Thanks this helped us out fixing our drone.
An excellent, concise and clear step-by step guide. Just what I needed. Thank you!
Great video as I am about to undertake this repair myself. I am less apprehensive now about doing it. Suggestion, avoid letting your coat's metallic zipper pull from dragging across all the sensitive electronics - not to mention the noise was somewhat distracting. Overall good video. Thank you for posting.
Thanks haha. I felt the same way. Good luck! Let me know how it goes.
Awsome ! Thanks to you I fixed my new gimbal in 20mn only!!! Very easy following you step by step! Thanks again and keep going on!!!
Don’t be fooled by how easy this looks. If you have a new Mavic that has ever never had repair work performed, be careful. The two forward sensors for the Front Vision Position Sensor Arm are somewhat “sealed” to the Gimbal board. It’s a rubbery type substance and is difficult to unseat these Cable connectors from the board.
The gold ribbons that connect to the left and right sides are EXTREMELY fragile. I recommend removing the arm along with the Gimbal when replacing the Gimbal/Camera assembly.
Awesome video, best mavic disassembly on RUclips! Well done and thank you.
Thanks so much
Great instructional vid
Saved my gimbal!
I followed your instruction and simply just put my gimbal back in and it worked again... must have been a lose connector after a crash,
Thanks
Thank you so much! Well done and I was able to perform the 'operation' without drama.
Very clear and precise instructions. Thank you!
Thank you very much for your video, it helped me greatly and can't imagine how much money I saved by not sending out, thanks again...
Thanks Anita! That was awesome! Really well laid out instructions and camera work. Nice job :) Franny
Thank you! I was not willing to attempt this myself but your video was very helpful and easy to follow!
thomas langers glad it helped! I'm hoping to post a video of the reassembly some time soon, so stay tuned!
amazing that looked super easy ...definitely got my subscription
Great tech video Anita! Looking forward of seeing more of your work.
Nice informative video, you helped me replace my mavics gimbal that I broke after a crash
You're a lifesaver. Keep up the good work!
Thank you and happy flying!
Great video very helpful. I'm ordering a ribbon cable tomorrow. I'll be using this video to help me through my install. Thanks
Me too. Local hobby shop said that the gimbal will have issues and need to be sent to DJI but I'm not buying it. I'll stop back when the install is done to update.
Let us know how it goes! Happy flying!
spot on Anita you made this look very easy i will atempt this my self thanks
saved me from sending it in. Thanks a bunch!
This is a very helpful tutorial. Will you upload a video on how to disassemble and reassemble the arms?
Sure! I am hoping to get some videos in soon, but we're pretty backed up here! Subscribe and stay tuned ;)
Thank you for this video! Followed instructions, and gimbal came right out!
You rock! Love the vids. Precise and informative with little tricks of the trade.
you are the best
beautiful, smart and technical - perfect woman
Great video Anita. Thank you for sharing.
Outstanding!! Thank you Anita!
Nice work! Very helpful and well done!!
Very helpful and detailed video. Thank you very much
thanks for making it look so easy.
You're awesome! Thanks for these videos! You saved me a lot of money. Subscribed.
Great video, I was able to replace the gimbal and camera in my drone. Thank you!
Well explained what a great video thank you for your knowledge
Thank you very much, this video helped a lot.
Thanks for sharing. Help me a lot to replace the Gimbal. Ta.
Please provide in next tutorial regarding how to replace front vision sensors.
Very, very good video! Thank you about information!!!
Very useful videos! Regards from Sweden!
This is great, thank you!
Great job, Anita. Thank you so much for making this! I'll definitely keep fixacrash.com in mind for repair services.
Hey. Great video. Your instructions are clear and understandable. Can you give me a suggestion on how to remove one of the screws that is stripped. The screw was stripped from the beginning. Either it came from the factory like that or the business I purchased it from wasn't truthful when they sold it as new. Anyway, any help would be appreciated. Thanks!
is it me or are some of the screws different lengths??? great video either way. im putting it back together and noticing that some of these screws are different sizes
such a great video
immediately went to your channel to see more content
Are you still around?
THANK YOU SO VERY MUCH! I FIXED MY DRONE! WOOHOOOOO!
I want that job. I love working with little pieces
Acabo de reparar mi drone con este video!! Muchas Gracias!!
Juan Carlos Mora Loaiza ¡Eso es genial! ¡Gracias y espero que te diviertas volando tu drone!
great job the best I have watched!
Nicely Done! One question. You mention a glue that is holding down the connectors. All my connectors have a this black glue-type material. It is also used inside the body to hole wires in place against the body or on the circuit board. Is it important to replace this glue? I
fd so what should I use? A hot glue or such?
Great video, thanks for the help I am really grateful.
What tools do you need to disassemble? Besides the hex screws, what kind of plastic clip removers, or whatever you call it, does one need? *PLEASE* get back to me ASAP* !! Thank you. I need to do a repair, however, I'm not sure exactly what it is I need. *PLEASE HELP* !!!!!
Great vid.doing this repair tomorrow. Awesome info. Cheers
Very helpful! Thanks!
thank you!!!! i need this video to repair my mavic
@Kerfala Diane that s right...I got the gimbal malfunction... And one day got fire in cable...thank God...I bought the cable for 15$ and repaired it for my self
Thanx Much. Very interesting and informative tutorial
My gimbal is not working. So does that mean I have to buy a whole assembly and do it like the video?
Hi, it is possible that the gimbal itself may be able to be repaired, depending on the issue. Here's a second video that shows a more in-depth disassembly. ruclips.net/video/4FOkberz7ys/видео.html
@@FixaCrash Hey. What to do if these rubber bands break? Because i think it will happen to me soon.
Very nice Anita, very explanatory video, although I do have a question, where would you recommend me to get a brand new gimbal?
How to extract a tiny stripped hex screw like this? Tried rubberband between tool for grip, next trying epoxy and sacrificing a hex key. Such a tight spot...
Let me just add that you should invest in a REALLY GOOD 1.5mm hex allen wrench. I didn't even get thru 4 screws before I rounded out 3 hex allen wrenches. The first tool was admittedly a cheap one. Then I bought a mid-grade one from Home Depot and it rounded that one as well. Then I went and bought a $30 metric set from Home Depot (the most expensive one they had) and it rounded out that 1.5mm tool as well! Thankfully I had a friend that had some VERY EXPENSIVE hex wrenches that didn't strip like a cheap hooker. They were a brand called WIHA Ergostar Ball End Hex made out of
"chrome-v-moly super tool steel". Google it.
You are awesome!!! Thank you so much!!!
Thank you sweetie!! This was super helpful!!
Thank you I'm about to fix my drone😁
well I crashed my drone and now im ordering the camera now that I saw this thanks and will let you know how it comes out ps and thanks for telling which tools that I will need 👍🏾
Great video!!! I do have one question though... If my gimbal tends to drift left and/or right during flight does that mean I need to replace the entire gimbal or could I simply replace the gimbal arm?
Amazing video. I have a question, when I removing the 1.5 mm screw from the front wing, I drop it and can not find it. Could you please tell from where I can buy this specific screw? Thanks
Hi, could you give me the brand name of the screwdriver? I'm looking for that exactly, thanks.
Hi - great video - thank you. I replaced the ribbon - and my drone flies perfectly - but the multi-braided cable that delivers the video feed (I think) also has a couple of broken strands. Does anyone know where I can get a replacement?
eBay shall have them! Thanks!
Hello Anita!
Very helpful video.
Could you kindly let me know where did you buy the blue tool to open the body of the drone ??
U rock. Thank u so much. When it's put back together do u use glue for the places where it was glued in? If so, what kind of glue do u use?
I currently don't use glue to hold them in, haven't really had an issue with this. But there are options such as liquid electrical tape and neutral cure silicone rubber. Happy flying!
FixaCras
WELL DONE...
Thank you!
Thank You
Good video!
Hey ! Thanks fix a crash i Made it thanks to your amazing really well "lesson"
Great job, keep up the great work! 👊 Happy flying!
Great video
Good job
Amazing
I had a crash yesterday, first time might I add. The camera is no longer attached and one of the arms were dislocated but I put it back on. My thing now I figuring whether to buy the entire camera assembly which is $230 or just the camera and install it myself. I doesn’t seem that hard according to your video. Which is easier the entire camera or just adding the camera? Please help!
Thanks for the great video but you forgot about 4 screws on the bottom that hold the top hull in....
Hi, thank you for your feedback! I will definitely make sure to get all the screws and make it more clear in the future, although I think we did mention them at 2:21.
You're right! I had fast forwarded to the part when you get the screwdriver out. Very helpful video overall!!!
Thank you!
Is there a video for replacing only the rubber bands?