I'd love to hear your thoughts on the surron, considering it's twice the weight and decent power. The CYC x1 is wicked I want to retrofit onto my bike. Awesome video, nice wheelie skills, you are flying my guy!
What is your gear ratio? I am running a ten speed 11-48 in rear and a 32 tooth crank sprocket. I can't get sustainable wheelies at that kind of speed from my cyc x1 pro gen3. Running a 72v batt at 60 amp continuous.
hello! you don't have problems with police in uk? i want to go also with my cyc gen 2 build on that country but i heard if i got caught my bike is going to be crushed...
@dragos32 From my experience with ebikes the police in the UK don't have a clue, as long as they don't see you flying above 25mhp being a disturbance you'll probably be fine. I do want to add though my previous ebike wasn't a DIY build it was a bike with the bosch cx motors with it chipped going 36mph on the roads.
I’m curious what rear hub you’re using? I have a Marin Rift Zone with a CYC stealth and a low engagement Shimano hub. Throttle engagement is pretty violent sometimes
What throttle do you use ? I have the same set up. Gen 2. 72v 80 amp continuous. Bac 2000. With the standard thumb throttle. There’s a major lag for some reason. Idk.
Can you make a vid on all the stuff that's on that bike? And what is the bikes name I love it and I want the samething. Last questun how fast dose it go?
Hi , yes I will do video about my bike soon when I have time. Not sure about top speed I only had 46mph and it still creeping up so I think it could do 50mph no problem
@@Jack77169 I'd love to have a bike like yours. It's the ultimate ebike build, light weight and high power make it so quick through those tight and tricky routes. It looks like you're putting about 7kw through it and its holding up really well. I've seen a few videos where these motors have problems with the magnets coming loose and shorting the motor because they're glued to the armature with very thin edges holding them in. The centrifugal force and heat warp tends to tear them out after a while if untreated. I was wondering, did you use some kind of electrical varnish or strong sealant to keep them from coming loose? If you did, could you let me know which one please?
Damn that bike rips! Solid build.
I'd love to hear your thoughts on the surron, considering it's twice the weight and decent power. The CYC x1 is wicked I want to retrofit onto my bike. Awesome video, nice wheelie skills, you are flying my guy!
What is your gear ratio? I am running a ten speed 11-48 in rear and a 32 tooth crank sprocket. I can't get sustainable wheelies at that kind of speed from my cyc x1 pro gen3. Running a 72v batt at 60 amp continuous.
That’s cause you don’t actually know how to wheelie.
Absolutely beautiful! Thank you!
Can I ask why you stop posting man? Your videos are class 😂😎👍
Nice bike.
What Battery do you use? Lipo, Lion? Volts and capacity for which range auf your bike?
Thanks
Lithium ion 72v 13ah 100 amp
hello! you don't have problems with police in uk? i want to go also with my cyc gen 2 build on that country but i heard if i got caught my bike is going to be crushed...
@dragos32 From my experience with ebikes the police in the UK don't have a clue, as long as they don't see you flying above 25mhp being a disturbance you'll probably be fine. I do want to add though my previous ebike wasn't a DIY build it was a bike with the bosch cx motors with it chipped going 36mph on the roads.
I have the same setup I need help please it keeps cutting out
I’m curious what rear hub you’re using? I have a Marin Rift Zone with a CYC stealth and a low engagement Shimano hub. Throttle engagement is pretty violent sometimes
Currently have hope pro 5 with 108ep
@@Jack77169 What twist throttle do you use? I’m going to upgrade to the Hope so I can wheelie like you
@@kylemacdougall3125 it's surron throttle
0:49 - OMG WTF?! 🤯
What throttle do you use ? I have the same set up. Gen 2. 72v 80 amp continuous. Bac 2000. With the standard thumb throttle. There’s a major lag for some reason. Idk.
Do you have more details on the build?
That thing rips. Sick bike
How is it feel wheeling? How responsive it is? Good? Compared to surron?
Have u ever had to replace any of the drivetrain? Seems like it would have to put up with a lot.. What frame have you got this on also?
Can you make a vid on all the stuff that's on that bike? And what is the bikes name I love it and I want the samething. Last questun how fast dose it go?
Hi , yes I will do video about my bike soon when I have time. Not sure about top speed I only had 46mph and it still creeping up so I think it could do 50mph no problem
My last video have some details about the bike but not everything
@@Jack77169 I'd love to have a bike like yours. It's the ultimate ebike build, light weight and high power make it so quick through those tight and tricky routes. It looks like you're putting about 7kw through it and its holding up really well. I've seen a few videos where these motors have problems with the magnets coming loose and shorting the motor because they're glued to the armature with very thin edges holding them in. The centrifugal force and heat warp tends to tear them out after a while if untreated.
I was wondering, did you use some kind of electrical varnish or strong sealant to keep them from coming loose? If you did, could you let me know which one please?
I got the (BAC) 2000 with the CyC motor same one how do I tune it I have a iPhone nothing works
That's so fast I need that
how long does the 13 ah battery last goung that fast?
Having a lot of fun though 60 mph top speed.
What Battery did u use? Looking for a good battery for the X1 Pro Gen 4 5000W that is capable but safe
I build my own battery
Top speed ?
Thinking about doing this. Can these motors handle all mount/trail type riding?
Motor still holding up?
This is actually my second motor the first one overheated and cyc sent one out for free
Home many miles do you have on your 2nd motor? What gen is it?
질문 있습니다.
배터리 용량이 어떻게 됩니까
72v 13ah, 100amps
Yess man you from the uk