LIVE | Jayco Camper Triple Colour LED Outside Lamp - with Dimming & Motion Sensing from 3DPrintRV!
HTML-код
- Опубликовано: 19 июл 2024
- In this episode we install this all in one LED light onto our Jayco Swan. Finally a solution which provides dimming, orange and warm light and with an added bonus motion sensing! This mounts to the existing holes and uses the existing wiring - it's that easy!
Royce from 3DPrintRV have knocked it out of the park with this one. You can find it on their website, here is a link:
www.3dprintrv.com/products/le...
Also check out all the other products they have including the KlevaCool range of fans we have also installed.
To help you out we have also broken into chapters so you can skip through to what section you need to watch:
00:00 Introduction & Skit
02:48 Replacement Light
04:11 Why a New Light?
05:28 The 3DPrintRV Solution
07:25 The Kit
08:37 Removing the Existing Light
12:25 Preparation for New Light
13:37 Connecting the Cabling
17:23 Applying the Sealant
18:30 Installing the New Light
21:11 How it Works
23:16 Our Final Thoughts!
We hope you enjoy this, thanks for watching and as we always say - get out there, stay safe and have fun!
#workliveplay
#wlp
#jayco
#klevacool
#3dprintrv
#youtuber
Great work and thank you. A little tip for removing something silicone on. Use wide green masking tape around the item your removing (stops scratching). Light Fishing line, with a handle on each end (enough line to pull/push), I learnt this trick at a panel beaters, removing emblems and other items glued on or silicone on. Thanks again for your tips and tricks.
My man up here providing me solutions in real-time that I am currently researching!
That's what I like to hear!! Happy to help out. I pushed this one into the schedule as I know a lot are on the hunt for something like this. The sensor light for me is a really handy thing, I need something similar on the Journey now, lol.
Yes, would love to know when you find something similar for the Jayco caravan. A simple but great alternative! Thanks Vaughan! Keep up the good work.
After our last camp at Hat Head in the Journey I'm pretty to keen to see if we can get a similar configuration working on the Journey. The challenge will be whether to stay with the existing Jayco wireless switching or convert to 12v permanent to the light. I might see if I can get Royce to make a prototype and have a play with it 👍
These look like a great idea. I’m buying one now. Thanks for the handy tips for installation.
No problem at all. I was pretty excited when I heard from Royce he was looking to make them. Once you get the old light off it's a great easy install 👍
Nice work Vaughan, another classic WLP video! Will be doing this one on my Eagle for sure 👍
I was pretty excited when I heard about this and got a sneak peak when we were up North. It's a great solution for the outside lighting on these campers. I'm pretty keen to get this or a version similar working on the Journey now...
we installed a 12v LED dimmer with rf remote into our existing outdoor light which works well - not a pretty unit the OEM thing but i'd have my reservations using a 3d printed unit outdoors in the sun (even more so not being a single piece hanging grabbing tree limbs tight tracks snapping it off) - not very uv resistant and quite brittle from the start and warp in heat.
Royce over at 3D PrintRv produces these as a commercial product with warranty. He has a lot of knowledge on filaments etc and has done a lot of R&D on this, like he does with most of his products.
The RF remote conversion actually sounds great but is probably not something a lot would tackle. Agree it is slightly vulnerable potentially if you were talking down really overgrown or narrow tracks however most would not take their campers through such terrain. The awning remains the furthest protrusion and would be prone to damage in those instances, especially with the top leaning on uneven tracks. It's coming up with a happy medium, depending on what you use it for I guess.
Shut up and take my money. Hell yeah so excited. Christmas came early.
Its such a great solution!!
Great video, do you know if a black version is available?
I meant to put that in - a black version is on it's way I believe.
It would be a good option. If he had put USB charging points on it as well. I’m looking at putting one of those ones on that have a built-in Bluetooth speaker and you can also add a USB charging point.
Oooo, yes that would have been a great add on. Hmm, I'm sure Royce could work something out if there was a demand for it.
Don't you have a whole new van,
We have both the Swan and the Journey... for now. Primarily as I am still ticking of the list of projects on the Swan.
How is that plug and play...
Did you watch?