Topology Optimization in ANSYS with Multiple Load Cases (Fully Narrated Tutorial)
HTML-код
- Опубликовано: 21 авг 2024
- In this video tutorial, I will show you the complete process of running a Topology Optimization analysis with multiple load cases in ANSYS. From this video tutorial, you will learn.
1. How to run a topology optimization analysis.
2. Design validation.
3. Named selections creation
4. Mesh recommendation for an optimized body to run a validation analysis on it
5. How to check mesh quality for FEA analysis.
Let’s get started.
The CAD file of the Optimized Shape can be found at:
grabcad.com/li...
Become a Channel Member:
/ @mechtasia6643
▶️ You Can Find Me On:
Facebook: / mechtasia
GRABCAD: grabcad.com/me...
One of the best video on this topic available on RUclips. Thanks!
Welcome!
I can't thank you enough buddy. I was stuck at post-processing my project. Your video saved my bachelor thesis. Thanks a lot!
Welcome!
i am totally completely new in suck optimisation, than you for sharing your knowledgaes
Welcome!
Highest production quality FEA tutorial I've ever seen
Thanks!
Thank you so much for explaining the topic in detail!
You're very welcome!
thank you so much! spend 5 hours trying to figure out what to do and only your video helped!
Amazing, it helped me alot. Waiting for more videos
Glad to hear that
Excellent content, very well explained. Thank you.
Glad it was helpful!
Very useful. Clear explanation. Thank you
Welcome!
Please upload more videos on geometry optimisation using Ansys..
Sure
Thank you for the tutorial!
Is there a difference between applying multiple load steps in one static analysis vs having multiple static analysis like this? ie, are the stresses in each step summed/avg if multiple load steps are used?
One can use both approaches to run multiple load step topology optimization analysis. This approach gives much more control as we can specify weight to any specific load which we think would be critical to our geometry/part.
I do request to post videos on different meshing qualities. Thank you ❤️
Welcome! I will in near future
Thank you for your video, very clear and helpful. I applied this on one of my model but faced an issue when it came to the validation analysis step. My model is not made of 1 single component like this of your example, it's an assembly of several components and I do optimization only on 1 of them. When I transfer the data to the validation system, only the optimized component is transfered, not the whole assembly, which makes the validation analysis useless this way. Do you have a tip which could help still using this simple way to create the validation analysis but for a more complex assemblied model where only 1 of the component is optimized ?
Welcome! One possible solution for your problem is that you can export the geometry in STL and then clean up the geometry in ANSYS SpaceClaim. You can also convert the optimized STL geometry in SOLID(STEP) by using SpaceClaim and then make the assembly again in any CAD modeling software and run the Static Structural analysis on the assembly.
This tutorial was a great help for me.
Can you please help me know how to reduce the analysis time taken in the topological optimization?
What steps needs to follow in the analysis settings of Topological Optimization part?
Great
Thank You sir, can you please make video on cleanup of optimized geometry in space claim?
Welcome!
Loved the content, helped me a lot in my projects. Would like to contact you, if possible, to exchange some knowledge on Topology Optimization and Additive Manufacture.
Keep up the good work!
Thanks!
Hi, first of all thanks for such a nice video. I get this "*** ERROR *** Generating constant data failed". Any tips?
p.s. I am doing lattice optimization
First viewer
Explained very 👌. How to add stress values as a limit?
Right Click on the (Response Constraint > insert > Global Von-Misses stress constraint). From here you can add stress values as a limit.
Sir, can you share any project ideas for manufacturing student related to ANSYS software?
You can use airplane landind gear wheel arm and optimize its geometry for your project.
How this STL file clean and print spaceclaim
i am unable to se the objective right. it says "Invalid "Environment Selection"
"
Where is the next tutorial using SpaceClaim to smoothen the geometry? Can't find it.
I am working on it will upload the video within a week. Thanks!
Any reason why you didnt do this in Ansys Discovery?
Ansys topology optimization gives you much more flexibility when it comes to multiple load steps, meshing, design validation, etc.
My smoothing isn’t working , any idea why
Increasing or decresing the value may help.
Please exclude the background music
Next time I will consider this. Thanks for the suggestion
Please without music.
Next time 😀