“Hello! I’m impressed with the quality of your work. If possible, could you create a demonstration video? If that’s not feasible, it would be greatly helpful if you could share the dimensions of the machine you built. I live in Brazil and am interested in building a similar unit for home training. Thank you in advance for your attention!”
This is exactly ruclips.net/user/postUgkxUHHotQRjIQnfuxEeVotlkHVYWH0DXZoS what I needed to get some exercise while I'm stuck at my desk all day. It's just the right size. Only downsides are that the right oeddale unscrews itself while I use it and increasing the tension causes it to squeak while in use. Both are minor issues that aren't that important to me. So I give it 5 stars.
Le problème concernant cette machine, ce n'est pas le prix car elles ne sont pas très chère. Mais l'encombrement. Je n'ais plus de place dans mon homegym... Il faudrait que j'imagine une machine qui prenne le moins de place possible et qui soit pliable.. Pas facile... Cela dit, c'est toujours un grand plaisir de fabriquer soit-même sa machine de musculation. Bravo pour votre travail !
Thank you for watching. The pipes of seat and foot rest are same size. Their outside diameter is 25.4mm ( 1.0' ), wall thickness is 1.6mm. And sheathe pipes are 31.8mm ( 1-4/1' ) od, thickness 1.6mm. Thank U.
The outside diameter of main wheels are 65mm, guide wheels 38mm. Make reference to www.hammer-caster.co.jp/catalog/html5.html#page=361 Main wheels are 429S-NRB φ65 on page 326, guide wheels are 429G-N φ38 on page 324 . Main wheels have ball bearings inside. Guide wheels have no ball or roller, just through holes. Visit my new you tube " Homemade Leg curl & extention Machine "
Thank you for watching. Pulleys don't have any groove, only run inside guide rail C-channel. Trolley pulley wheels can not be lifted up anytime with their weight ( including barbell plates ).
Thank you for watching. About measurements, see the reply to Sr. Caique and Mr Aldimo. Bolts at the corners of main triangle structure are M-10. Fixing bolts for chair pipes are M-8. ☀Q.
11:44 n Ne JAMAIS tendre les chambre à la fin du mouvement.. Vous deteriorez vos articulation. Gardez toujours une legere flexion des jambe quand le chariot est en haut.
Cross section size -- sled / □40×40×1.6mm -- guide rail / C 75×45×2.3 -- base frame / □50×50×2.3 -- support post / □40×40×1.6 -- weight hanging bar / Φ27.2×2.8 Length : See the reply to Mr. Aldimo
Thank you for watching. Yes, I'm using MIG machine as Semi-automatic welder with no gas. So I removed shroud which protect gas diffusion. This method is much convenient for cramped corner. But there ia a insulator at the base of wire tip. Thank U.
It would be interesting to see lol. I had to look closely at that tube if it’s bent 90 to flat and 90 again it would be pretty strong but it’s too hard to see exactly. I would build it out of box tube and have the sled mounted on top then you could weld angle iron down the length of it to hold the sled in place.
Thanks a lot for watching. I had been a civil engineer for fifty years, designed many infrastructures. So structural caluclation is my field. As Joshua remarks, I designed it's maximum load 200kg. You are exactly right. Guide rail is made from C-Lipped Channel. It is popular in Japan. Also can be bought in US. Thank U, Joshua and Andrew.
@@竜卷男 Ah, I see great job fabricating not a lot of working engineers left. I am a welder/fabricator working on nasa,airforce and military contracts. I have an orbital bender etc in fact I think you have most of the same types of equipment I used for my side jobs.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
“Hello! I’m impressed with the quality of your work. If possible, could you create a demonstration video? If that’s not feasible, it would be greatly helpful if you could share the dimensions of the machine you built. I live in Brazil and am interested in building a similar unit for home training. Thank you in advance for your attention!”
This is exactly ruclips.net/user/postUgkxUHHotQRjIQnfuxEeVotlkHVYWH0DXZoS what I needed to get some exercise while I'm stuck at my desk all day. It's just the right size. Only downsides are that the right oeddale unscrews itself while I use it and increasing the tension causes it to squeak while in use. Both are minor issues that aren't that important to me. So I give it 5 stars.
Le problème concernant cette machine, ce n'est pas le prix car elles ne sont pas très chère. Mais l'encombrement. Je n'ais plus de place dans mon homegym...
Il faudrait que j'imagine une machine qui prenne le moins de place possible et qui soit pliable..
Pas facile...
Cela dit, c'est toujours un grand plaisir de fabriquer soit-même sa machine de musculation.
Bravo pour votre travail !
Can you add the dimensions for the seat, foot rest, the size of pipes used and size of bearings of sled please 🙏🏼 fabulous job loved it
Thank you for watching. The pipes of seat and foot rest are same size. Their outside diameter is 25.4mm ( 1.0' ), wall thickness is 1.6mm. And sheathe pipes are 31.8mm ( 1-4/1' ) od, thickness 1.6mm. Thank U.
What’s the size of the rolling bearings and plain bearings 🙏🏼
The outside diameter of main wheels are 65mm, guide wheels 38mm.
Make reference to
www.hammer-caster.co.jp/catalog/html5.html#page=361
Main wheels are 429S-NRB φ65 on page 326, guide wheels are 429G-N φ38 on page 324 .
Main wheels have ball bearings inside. Guide wheels have no ball or roller, just through holes.
Visit my new you tube " Homemade Leg curl & extention Machine "
what kind of mechanism and bearings did you use to have smooth movement without blockages?
Great project
Thank you for watching. Main wheels have roller bearings. Guide wheels have plain bearings. Also all shafts are stainless steel bolts. Thank U.
Nice project....do the pulleys have v groove? What prevent trolley pulley wheels from being lifted up the rail as you push the load up with your legs?
Thank you for watching. Pulleys don't have any groove, only run inside guide rail C-channel. Trolley pulley wheels can not be lifted up anytime with their weight ( including barbell plates ).
Ett imponerande hemmabygge! Och ett rejält projekt att ge sig på i pandemitider. Jag är glad att du håller igång! 🙂
Tack för att du tittade. Vi önskar världen utan Covid 19.
Hola excelente maquina, como podría conseguir los planos
I'm from Brazil, do you have de project ?
Cuáles son las medidas de los cortes de todos los tubos?
See the reply to Mr. Caique. Ver la respuesta a Sr. Caique. Gracias.
11:51 la maquina hace ruidos como si estuviera gimiendo xd, pero buen trabajo, te quedo muy bien
Wud u share the sizes of ur material, the hole diameter bolt sizes n wat bearings are u using. Magnificent craft
Thank you for watching.
About measurements, see the reply to Sr. Caique and Mr Aldimo.
Bolts at the corners of main triangle structure are M-10. Fixing bolts for chair pipes are M-8. ☀Q.
Can you give me dimensions and angles of machine?
11:44 n Ne JAMAIS tendre les chambre à la fin du mouvement.. Vous deteriorez vos articulation.
Gardez toujours une legere flexion des jambe quand le chariot est en haut.
do you have the measurements? please add to the description the measurements of metal.. this is awesome! you're a great welder vlogger!
Thank you for watching.
About measurements, see the reply to Sr. Caique and Mr Aldimo.
hi, congratulations. do you have templates/plans or measures
Cross section size -- sled / □40×40×1.6mm
-- guide rail / C 75×45×2.3
-- base frame / □50×50×2.3
-- support post / □40×40×1.6
-- weight hanging bar / Φ27.2×2.8
Length : See the reply to Mr. Aldimo
Ficou muito bom... parabéns.
Mándeme las medidas porfavor
Gracias por compartir tan excelente diseño lastima faltando las medidas 👌👍😎
竜卷男 SAID:
Cross section size -- sled / □40×40×1.6mm
-- guide rail / C 75×45×2.3
-- base frame / □50×50×2.3
-- support post / □40×40×1.6
-- weight hanging bar / Φ27.2×2.8
Length :
Base Frame : Length = 1,400mm Width = 800mm
Guide Rail : L=1,400 W=450 Angle 45゜
Support Pillar : L=900
Sled : L=400 W=350
Wow, it's amazing. Good job!
Thank you.
I think better support for the seat and a liite grease on wheels and a safety mechanism it will be all right
Quanto puoi caricare ?
projeto Maravilhoso simples bonito e compacto (Brazil 27 / 08 / 2022 Belém - Pa)
Thank you for watching.
Las medidas cuales son
Excellent job
Thank you for watching.
And I thought my leg extension/ leg curl machine was cool… Good work dude!
I've watched your leg extension/curl machine. It's excellent ! Thank you.
@@竜卷男 thank you!!
Pdf please and measurements please
Very nice build..!!
Thank U for eatching.
Good job. Be carefull. The execution of exercice is wrong. You will damage you knee doing it this way. Keep safe.
Thank you for your kind advice. I will do without knee locking out to safety.
Awesome 👌 👏 👍
Thank you for watching.
Un travaille magnifique bravo l artiste
Merci d'avoir regarde ma video.
Medidas por favor
Greetings, I appreciate a lot if you can place the measurements of the profiles, please a hug
Base Frame : Length = 1,400mm Width = 800mm
Guide Rail : L=1,400 W=450 Angle 45゜
Support Pillar : L=900
Sled : L=400 W=350
Amazing. Good job!
Thank you.
very nice wow
Thank you.
No wonder they are expensive. Lots of labor, equipment and expertise building them.
Absolutely it's correct. You know every thing.
Great idea sir👍
Thank you for watching.
I know your using gasless MIG and flux core wire, but where the hell is your shroud and insulator
Thank you for watching. Yes, I'm using MIG machine as Semi-automatic welder with no gas. So I removed shroud which protect gas diffusion. This method is much convenient for cramped corner. But there ia a insulator at the base of wire tip. Thank U.
@@竜卷男 fair enough , I couldn't see an insulator , I bet you must go through a fair few tips and diffusers, even with reversing polarity. Nice build
Manda as medidas do projeto
Good job. Congratulations
Thank you so much!
No matter the age , still searching for the gains , mad respect !
Thanks a lot. You know the true value !
Great job but very light duty. I would not want to put much weight on it.
That looks like .095 wall tube because of the angle most of the weight is coming back it’s more than strong enough and definitely not light duty.
@@andrewstutz4240 well I wouldn't be putting 300kg on it!
It would be interesting to see lol. I had to look closely at that tube if it’s bent 90 to flat and 90 again it would be pretty strong but it’s too hard to see exactly. I would build it out of box tube and have the sled mounted on top then you could weld angle iron down the length of it to hold the sled in place.
Thanks a lot for watching.
I had been a civil engineer for fifty years, designed many infrastructures. So structural caluclation is my field.
As Joshua remarks, I designed it's maximum load 200kg. You are exactly right.
Guide rail is made from C-Lipped Channel. It is popular in Japan. Also can be bought in US.
Thank U, Joshua and Andrew.
@@竜卷男 Ah, I see great job fabricating not a lot of working engineers left. I am a welder/fabricator working on nasa,airforce and military contracts. I have an orbital bender etc in fact I think you have most of the same types of equipment I used for my side jobs.
vary nice
Thank you for watching.
Muy buen trabajo
Gracias por mirar.
ótimo parabéns
obrigado.
สูดยอดไปเลย
nice
Thank you for watching.
Awesome :)
Thank you for watching.
he measured the deminsions of the leg press he bought....then returned it the nxt day....lol....
Super!
Thanks!
😄😄😄for kids 👶
Thank you for watching.
Otro video para mudos.sin ninguna explicacion.hay qie adivinar que esta haciendo y para que sirve.
Gracias por mirar.
Pues use la cabeza para pensar y no para escribir boludeces
Pues use la cabeza para pensar y no para escribir boludeces
👏👏👏👏💪👍
Genial
Merci
Plz Damion
Don't lock out your knees wtf you doing bro lol
Thank you for your kind advice. I will do without knee locking out to safety.