Excellent. Very good and enjoyable review of the new Goodies in the shop. I always enjoy the Emails from skyfi audio. Anyone who should ask me, I will always refer them to You. Thanks & Best Regards.
WoW 😲 amazing 👍 I'm only lucky that I'm from the Czech Republic and it's a bit far from you, I'll probably go crazy if I see this in person 🤪 or my pump would burst 😂 Nice day 🙂Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio. I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio. I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio. I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio. I wish you success in your work and have a nice day 🙂 Tom
. It's too bad none of this used stuff functions in Miami. Fernando proudly bought new and up-to-date amps, speakers & turntable. Oh the hypocrisy. Acid Jazz, Funk & Brass 🔈🔉🔊
I had new stuff sent to Miami so I could review it. Actually I don't have a preference and often will mix new and old stuff for fun. Back in NY, enjoying my Quicksilver 300B amps as I write this. Cheers.
@@SkyFiAudio . Yes, of course. A thousand pardons. You took on the whole Klipsch line without ever reviewing them. Right. And all the excited Klipsch videos prior to the Florida one were done without ever hearing the Heresys. Ya, Sure. Same goes for the new Technics line too probably. LQQK friend, I liked what you were doing BUT you were a blue-collar classic muscle car dealer who just got caught leaving us freezing while you show-off your brand new paddle-shifting mid-engine C-8 in sunny Florida. Don't shoot the messenger.
Excellent. Very good and enjoyable review of the new Goodies in the shop. I always enjoy the Emails from skyfi audio. Anyone who should ask me, I will always refer them to You. Thanks & Best Regards.
Just when I'm out you drag me back in with those Lamms! Mamma Mia
HiFi heaven 🤩
Happy with my old Technics 1600mk2 & MA1 TT
This place has the best deals in town!
I like the Pioneer CDP but parts are very hard to find if an issue occurs.
I have a near pristine 4350 but these 4345 are gorgeous.
Boy that pair of beautiful Jbl 4345 and wonder who will be the lucky guy taking them home…
Definitely gonna be a fun one
very nice products
Thank you 😊
Do you have Krell kav 250cd/2 cd player and Krell KRC-HR for sale?
shouldn't touch the tubes with oily fingers
Do you have an MC 2301 tube amplifier? I need two of them
I want it all
Is the technics at the start the white or silver one? It’s hard to tell cause of the lighting
There is a white SL1500C that looks kinda silver at the beginning.
WoW 😲 amazing 👍 I'm only lucky that I'm from the Czech Republic and it's a bit far from you, I'll probably go crazy if I see this in person 🤪 or my pump would burst 😂
Nice day 🙂Tom
Sorry so you are so far away. If you ever come this way pleas visit.
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio.
I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio.
I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio.
I wish you success in your work and have a nice day 🙂 Tom
@@SkyFiAudio Hello, thank you for the offer, but the Czech Republic is a little far away for an afternoon visit for a chat and a coffee 😁 moreover, there is a risk that the visit will drag on a bit 😂 but I never know where fate will blow me and if I somehow mysteriously find myself near you, so I would 100% not miss the opportunity to see your workplace with my own eyes and ears. It's like heaven on earth for me, not only do I like Hi-Fi equipment, but I've been involved in repairing electronics, including audio, all my life. Unfortunately, my workshop was completely robbed a few years ago and I lost all my equipment, I lost the will to continue, but it just can't be done, so I built a small workshop in the alcove of our bedroom and today I only do repairs as a hobby. I make almost all the test equipment myself because this technique is extremely expensive in our country - the last one was an artificial audio load 2 - 16 Ohm 300W and an attenuator with the possibility of RCA/XLR conversion with the possibility of inserting a RIAA curve for testing gramophone inputs on amplifiers with a line signal, but something must buy and so the latest addition to my workplace is the Keithley 2015 THD and DATS V3 from Dayton Audio.
I wish you success in your work and have a nice day 🙂 Tom
So there is a heaven?
Are the pass labs X600 for sale?
They will be after we are done sorting them out. Be sure to subscribe to our email blast on our website.
Ben, is it true that you are doing all the work while Fernando gets Jiggy in Miami?
hahah. we are all working hard unfortunately.
Not sure how I could possibly get a good listening experience with that much "stuff" around. Is this the store front?
Well come by and judge for yourself. Be sure to call ahead.
Which model and brand of turntable is behind the Pass stack?
I'm wondering what that Shindo will go for?
Those will likely get listed next week. Be sure to subscribe to our email blast on our website.
@@SkyFiAudio
Thank you!
DC
. It's too bad none of this used stuff functions in Miami. Fernando proudly bought new and up-to-date amps, speakers & turntable. Oh the hypocrisy.
Acid Jazz, Funk & Brass 🔈🔉🔊
I had new stuff sent to Miami so I could review it. Actually I don't have a preference and often will mix new and old stuff for fun. Back in NY, enjoying my Quicksilver 300B amps as I write this. Cheers.
@@SkyFiAudio
. Yes, of course. A thousand pardons. You took on the whole Klipsch line without ever reviewing them. Right. And all the excited Klipsch videos prior to the Florida one were done without ever hearing the Heresys. Ya, Sure. Same goes for the new Technics line too probably.
LQQK friend, I liked what you were doing BUT you were a blue-collar classic muscle car dealer who just got caught leaving us freezing while you show-off your brand new paddle-shifting mid-engine C-8 in sunny Florida. Don't shoot the messenger.