oh Sam....you crack me up...The intro states that by replacing your existing system with the Redvision you'll get rid of cumbersome rocker switches and electrical box, etc. However you've ended up with a wiring cupboard which takes up about 4 times as much room. Who's kidding themselves? You just wanted a new toy ;) Thanks for the content, keep up the good work. cheers
i dont mean to be off topic but does anyone know of a way to log back into an instagram account?? I was dumb forgot my login password. I love any assistance you can give me!
@Ian Juelz I really appreciate your reply. I found the site thru google and Im waiting for the hacking stuff atm. Takes quite some time so I will get back to you later with my results.
Hey Sam, should do some vids on more basic set ups. A lot of RUclipsrs do vids while sponsored by people like redarc. I do a lot of remote touring and run 150w fixed solar (150 portable) a DCDC charger and run a cetek for 240V shore power when needed along with a 300w sine wave inverter for charging laptops, portable UHFs along with Ryobi codless gear. All this was achieved for under a grand using name brand gear.
Yeah I think if you're running a heap of electrics for filming this makes sense but I for most people it's way over the top and I makes people think you need all this gear for a reliable and well functioning system. I priced all this gear and you're looking at around 4k
@@4x4CampingandAdventures what's a parts list needed for running a few camp lights And interior lights and a fridge, a solar panel, DC DC charger fuse box and an, AGM battery plus some cables n switches
2000 watt inverter is looking for 160 amps from one battery. Good luck with that. Fancy comms wiring is just what I'd leave out when going bush too. (30amp for the fridge?)
This red arc system is great I used it in a van conversion I done very accurate reading on input outputs on load you will love it sam especially the data logging from hour to hour and day to day for a month keep well in tough times like these keep the vids rolling I’ll be watching
Hey Bro, little tip for those sticky back cable tie holders, drop a S/Steel wood screw into the base of each self adhesive cable tie holders. Overtime the adhesive will get moisture and vibration they will fall off. Awesome setup bro.
Great vid, but Geez Sam, maybe get some conduit & shrink wrap mate, just to give it that pro finish & more protection against rub throughs & snagging of wire
Nothing is 100% Australian made when it comes to electronics. The circuit board, all the tiny nodes and electronic parts are pretty much all made in china. It would however be Australian designed and put together in Australia but the electrical parts would be China.
@@Izzysyota you just made me feel better. if you guys cannot wrap your head around it, same here! as a retired teacher one thing teachers forget is they already know what there teaching and them assume we know the terms. Can we have electricals for dummies! segment.
Sam Weyer no one expects you to go to work for free?? How else do you think youtubers make money. This is Sam’s profession. It’s not about the sponsorships it’s about making content for people to watch and learn about the products haha
Great video but I live on a boat and just looks like a lot more stuff to go wrong , salt water likes to kill stuff , I’m running a pretty serious 12 volt system but still like to keep it as simple as possible
I disagree. You can see when the angry magic pixies leave but that's generally a bad thing. Great instructional video. I'm more confident installing my own now
Redarc gear is expensive because of all the freebies given for promos. You've done well but then you have to do it or pay for it. I think it all looks exxsey.
Redarc isn't the future Italian been out for years..there are systems as good if not better than Redarc. The biggest issue I find with Redarc is you can only use their brand name inverter, bms you can not use a 3rd party one which is stupid if you ask me.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
oh Sam....you crack me up...The intro states that by replacing your existing system with the Redvision you'll get rid of cumbersome rocker switches and electrical box, etc. However you've ended up with a wiring cupboard which takes up about 4 times as much room. Who's kidding themselves? You just wanted a new toy ;) Thanks for the content, keep up the good work. cheers
The Redarc ad on the back wall of the shop kinda more says he wanted to do an infomercial for his sponsor while scoring a sweet 12v system.
i dont mean to be off topic but does anyone know of a way to log back into an instagram account??
I was dumb forgot my login password. I love any assistance you can give me!
@Reuben Armani Instablaster =)
@Ian Juelz I really appreciate your reply. I found the site thru google and Im waiting for the hacking stuff atm.
Takes quite some time so I will get back to you later with my results.
@Ian Juelz It did the trick and I actually got access to my account again. I am so happy!
Thanks so much, you saved my ass :D
Hey Sam, should do some vids on more basic set ups. A lot of RUclipsrs do vids while sponsored by people like redarc. I do a lot of remote touring and run 150w fixed solar (150 portable) a DCDC charger and run a cetek for 240V shore power when needed along with a 300w sine wave inverter for charging laptops, portable UHFs along with Ryobi codless gear. All this was achieved for under a grand using name brand gear.
jack russo agreed I have the same mentality dc to dc 250w solar and a battery that’s all you need
Yeah I think if you're running a heap of electrics for filming this makes sense but I for most people it's way over the top and I makes people think you need all this gear for a reliable and well functioning system. I priced all this gear and you're looking at around 4k
jack russo not including install but yeah agreed mate dual battery’s is fine for 99% of people with a DCDC charger
@@4x4CampingandAdventures what's a parts list needed for running a few camp lights And interior lights and a fridge,
a solar panel, DC DC charger fuse box and an, AGM battery plus some cables n switches
Oooo the project car 😏😋 nearly showed us 😂😂
@9:27 :)
80s series under that cover ey
TJ Jack definitely a xd or xe or something like that for sure
XA Xc ? 🤣
that is a xc falcon 70 's
and it's all offroad fitted out
Chopped 80 I think on 37's. Love the vid Sam and looking forward to your review on how it all came together and works once everything is dialled in.
2000 watt inverter is looking for 160 amps from one battery. Good luck with that.
Fancy comms wiring is just what I'd leave out when going bush too. (30amp for the fridge?)
Itechworld 120amp. Will do it. Standard max 150a. 5 minute discharge 175a. Peak short max 365a.
@J M dcs lithiums are the way to now days. Google them and have read
This red arc system is great I used it in a van conversion I done very accurate reading on input outputs on load you will love it sam especially the data logging from hour to hour and day to day for a month keep well in tough times like these keep the vids rolling I’ll be watching
Hey Bro, little tip for those sticky back cable tie holders, drop a S/Steel wood screw into the base of each self adhesive cable tie holders. Overtime the adhesive will get moisture and vibration they will fall off. Awesome setup bro.
A mate of mine has used this in his mobile barber shop down in Victoria!
Fantastic video can’t wait for the next to see how it all works
Great vid, but Geez Sam, maybe get some conduit & shrink wrap mate, just to give it that pro finish & more protection against rub throughs & snagging of wire
What do you do if this system breaks down when in the bush
Wow Redarc red vision manager 30 2000w Redarc inverter man you got the good stuff there 😍
Love the red arc gear - keen to heat how it works.
Missed a bit of blur mate, grill and lights gave it away!
Great vid, nice install job too!
Dog's breakfast 😂😂
I love that expression..
We have a similar expression here in Portugal...guerra de cães
that redarc setup costs more than my whole car lol
XCellent video mate, forget about the haters, Ive been waiting for someone to do this - looks like an awesome product, Aussie made too.
Nothing is 100% Australian made when it comes to electronics. The circuit board, all the tiny nodes and electronic parts are pretty much all made in china. It would however be Australian designed and put together in Australia but the electrical parts would be China.
Rock on Sam! Keep the vids coming bro...
Keen for the next video. I’m looking at a BMS30 or something else utilising a Simarine panel. Would be good to see why Redvision. Cheers mate!
place looks great! love what you've done with it 👍
IS THAT A REDARC!!
@9:50 what's the carpet/material you're using?
It's very cool, very smart but if that bus goes through some crazy water crossing it's like throwing a computer in a pool HAHA
Am i the only one who really want an electrical system but every video confuses the living day lights out of me :)
You are not alone 😂 I've been trying to wrap my head around it for the past year or so and it still confuses me at times.
@@Izzysyota you just made me feel better. if you guys cannot wrap your head around it, same here! as a retired teacher one thing teachers forget is they already know what there teaching and them assume we know the terms. Can we have electricals for dummies! segment.
do u have to have the manger 30 charger to be able to veiw the voltages and shit or can u just use the red vision by it self and use another charger
Warehouse starting to look great
Hey bro just saw u in Nambour like 5 mins ago at the 7 11 looks so much better in person
Was that a faclon under that tarp??🤔🤔
Good work. I’ll be sure to “subcribe”
M S i saw that too 😂
Wonder if it was on purpose
Hey Sam I love these types of videos nice work, oh and i love patrols😝, i so want a gu ute!
"Sponsored not Bought" 😜
Basically every 4wd channel
Probably the only way to afford Redarc gear. We love it but one 400w inverter was all we could afford :)
Sam Weyer no one expects you to go to work for free??
How else do you think youtubers make money. This is Sam’s profession. It’s not about the sponsorships it’s about making content for people to watch and learn about the products haha
@@anadasilva6636 yeah I'm not new to how RUclips works, champ
Western Australia Now and Then sounds like you need a better job mate
nice XC there under the cover
your not very good at hiding the project car!!!!
Haha was just thinking the same
Great video but I live on a boat and just looks like a lot more stuff to go wrong , salt water likes to kill stuff , I’m running a pretty serious 12 volt system but still like to keep it as simple as possible
What are you doing with the fairlane under the cover
Not a Fairlane as almost all Fairlanes had twin lights
What editing app do you use
Hey SAM!! what are you gonna do with ur old gauges from the a pillar???
Redarc sponsorship 👌👌. Good stuff. To expensive for me and my centrelink payment to afford tho.
krump 7 lucky Centrelink got doubled 😂🤣
@@TomMacca oh sweet as, so two fortnights or so and ill have me a new redvision 😂😂👌
@@TomMacca only for 6 months though
@@krump7429 you will need more than two fortnights to afford that stuff
Happy Friday Sam, great video what brand is the inclometer and were could you buy it from please
This new system tidies up all your wiring, its basically in but kinda looks like a dogs breakfast cause wiring goes everywhere. Hmmm
If I were redarc I wouldn't be pumped on giving someone a product like red vision if this is how they are promoing
Ha ha ha “Internet cable”, funny and inaccurate reference. Everything else is a good example for use and ease if installation. Great!
That system is great, but damn at about $5K for that setup, without batteries, I think I will can be a bit more tolerant of some not as neat wiring.
That’s a Xc falcon I have the same one
I disagree. You can see when the angry magic pixies leave but that's generally a bad thing. Great instructional video. I'm more confident installing my own now
He'll yes
I wonder how much for all that gear?
The dream 12v/240v setup. Redarc is a sponsor now?
how much for rent warehouse? thank you.
Where is the comp truck
24 pack of 3 ply double length bog roll be enough? 🤣
@@speyles XC nice
nice monaro, what year is it, looks like a HQ-HZ
What monaro?
@9.27 xc grille and light
@@raptor0040 i didnt watch the whole video, I'm just throwing a guess at what I thought it looked like
I need a bigger ute just to fit it in
Nice
Is that an 1970 ford falcon under the cover
He's a Holden man!
@@liamwalker1606 not any more
@@lucasmcpherson269 *sad face
@@liamwalker1606 78 XC? and that's why it's covered up!!!!!!!!!!!!
5:55 triggers Siri 😂
Redarc gear is expensive because of all the freebies given for promos. You've done well but then you have to do it or pay for it.
I think it all looks exxsey.
nice hand sanitiser
XC falcon
can i buy your old power box? hahaha How much to ship to perth :P
Huge coin HUGE coin ...Did I mention this gear costs a LOT ! HuGe !! $$$$$$$$$
wokbok43 eye-wateringly expensive.
@@gacoxd Built not Bought -> But had to mortgage my house for this shit ! lol
@@wokbok43 No, it would have been gifted for the free advertising to 87K subs, and '000's of views!!
Is... Is that a Jensen Interceptor?
No. It is not. Ignore me.
If your a loaded auto sparky, this system is for you!!
Project car kinda looks like an old falcon
Who else thought he was going to pull a hot plate out of the microwave at the end?
A full upgrade???
Didn't only just build it?
Wish u God Speed Man....
Definitely not good at hiding the project car, old ford falcon?
@3min hand sanitiser ready to go
He’s using plywood where’s the mdf at brutha 🤣
Redarc isn't the future Italian been out for years..there are systems as good if not better than Redarc. The biggest issue I find with Redarc is you can only use their brand name inverter, bms you can not use a 3rd party one which is stupid if you ask me.
$$$$ way to many $$ for the average Jo
martialllaw get a better job
That microwave ate the other S
xb hardtop??????????????
XC
Yew
What is your job besides RUclips?
If you know what you’re doin and it looks that bad I got no chance!
The irony - the channel is "built not bought" but the most expensive, albeit good quality BMS is being promoted. Hmmm
Not bought 😉
I hate wiring and im thinking i could give this a crack.
you spelt subscribe wrong.......
The project car looked like a hq well that’s what I think it looks like
you'd be poor if you had to pay for it
Be realistic dude. Not Many people are going to afford this shit..
Subcribe 🤣
Too fucking complicated.. who wants to run all this shit in an expedition vehicle.
Bullocks. Redarc gave you the components and told you to use them. Did they pay for your new studio? Oh sorry workshop. Bullocks I say. Be honest.
Thumbs down for the $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Upgrade? With Redarc Redvision?😂 U mean a downgrade!🙄