if you put the resin bottle in warm water making sure its not submerges in the water then the resin flows a lot better in the mini verse make it mini holiday sets. I love your videos Jackie
Jackie, you really need to wear a respirator when doing resin products there’s a lot of bad side effects from being exposed resin and I know you have a health issues.
The candles were scented because you don’t eat candles! They don’t want to risk people eating fake foods..as you do in fact usually eat food 😅 That’s the difference. Scenting something people don’t eat vs something people usually eat. Companies generally avoid scenting things like food if they resemble foods to avoid lawsuits, candles however are not food so they’re safe to scent.
@@recoveringsoul755 Play Doh is non toxic, meaning if it was accidentally consumed it would not cause major bodily harm. Should it be consumed? No, but it's better than eating literal resin.
@@GenderedMess it also has a scent and is made for children to play with Same as crayons have a scent. Small children are known for putting things in their mouths. Lots of things have a scent. Maybe it's hard to make unscented products? I don't think the scented candles argument is valid because soap is scented too, deliberately, and is definitely not good for eating
Honestly, the gingerbread house experience was pretty much true to life. With royal icing, it starts off gloopy and takes a while to harden. You have to hold the house pieces together until the icing hardens, or else it collapses. And the decorations really do start to slide if you're not holding them in place. At least here, you can solidify the "icing" immediately. I know there are geniuses out there who can make a perfectly stunning gingerbread house, but I am not one of them, so mine always end up looking like the aftermath of a visit from the Big Bad Wolf XD
Since I don't eat my gingerbread houses, I stick the house part together with hot glue! Because you're right, holding the pieces long enough for the royal icing to harden is HARD. And I'm right there with you, my houses always look a little worse for wear by the time I'm done.
Little tip: Try doing most of the decorating BEFORE putting the house together. Like while the pieces can still lay flat. It's way easier to make candies stick that way. Then fine tune after putting the walls together.
Trying to glue a house together with royal icing is a nightmare!! We make candy and do that- it is so much faster and more reliable. Then we make THICK royal icing for the decorations. And you put the icing on the decoration, not on the house first. Once they’re all dry, you can put more royal icing to tidy it up.
Build a cardboard form first, then affix the pieces to it with a few small dots of melted chocolate to make it easier to hold. When I was a kid this was in part the job of the youngest child to hold a cheap chocolate bar piece until their fingers were coated in melty chocolate then touch the backs of the pieces before adults/teens put them against the forms. The child is then praised and sent off with a cookie to lick their fingers clean and be out of the way. The chocolate sets fast and makes it easy to pop the form inward and free after the royal icing has had a few days to fully cure. We assembled the buildings, let them cure two days, then removed the forms, decorated in stages over a few days - this let us tilt the houses to different angles as we worked on one or two faces at a time, drying for a few hours in between. Then moved to their display platters and touched up. Takes about 10 days to do one or two weeks if you are baking them from scratch as well. there's a lot of waiting for things to dry/cure. Kits started releasing in the 90's and honestly the kits have always misrepresented the time commitment and tried to sell it as a 'fun afternoon or evening activity to do with kids, possibly on the holiday'. It's intentionally frustrating to incentivize buying more 'to try again'.
@@milkompoukalo I wanna see Jackie play Spyro the Dragon on her Raging Raccoon Gaming channel! Ya know, since she likes dragons so much! Are u a subscriber of that channel?
if you put the resin bottle in warm water making sure its not submerges in the water then the resin flows a lot better in the mini verse make it mini holiday sets. I love your videos Jackie
I actually have got the rare one. The buddy the elf spaghetti. It was really cool. It was actually kinda hard to make. But I know you could accomplish it. Tips on finding it: The shake is different the rare one has a little rattle and it weighs heavier than the normal one also it is wrapped in the hot cocoa wrapper. I’d love to see you make it on your channel so I hope those tips help!!!! Also I am a big fan of your channel!!!!!
I noticed for the gingerbread house was to use the spreader that the gingerbread kit gave you to apply resin. I'm guessing they wanted you to use the spreader to spread the resin instead of directly applying it to the roof with the bottle so it won't be as messy. Sorry it's quite difficult to explain I really love your videos they are so satysfying and fun! ❤
I think with the gingerbread house it would be better to maybe go in with some E-6000 or hot glue and glue the pieces together so you don't waste your resin. Then do one side at a time and keep it level while decorating and then hit it with UV. Then do another side, keep it level, etc.. Also, for the chocolate resin, I wonder if you would be able to poke a hole somewhere to allow some air flow to make it come out better??
I LOVE that you added the basting brush to the turkey! It made it just a little bit better and super cute. I think I would have added some cut up pieces of green paper on top to look like some sort of garnish, like parsley. 🤔
hi jackie i just wanted to say thank you for helping me get through all these years, i’ve been watching you since i was about 12 and just your positivity and humour always lifted my moods when i was in tough spots and idk if this is weird to say but your my comfort youtuber, im 17 now and i still come back to watch your videos 💗
There's a 4th one - Buddy the Elf's Candy Spaghetti Plate! - very elusive, but did see someone on here show it... $15+tax CAD?!!! where?!!! I finally found some at a local Showcase store, and they were $35+tx CAD!!!! Please, where did you find them!!!!! I'm hoping to find some on Amazon for cheap afterwards...the Halloween ones dropped price after, so 🤞🤞
I bought my first mini craft a couple of months ago. I bought the gingerbread house. It was a lot smaller than i was expecting, even after watching a lot of Jackies videos, but it was fun to put together. I did have a little uv light from a another craft to flash cure it be firm enough to hold its shape. I live in australia and its summer here so doing the full, final set outside wasn't an issue. I did do some personaliation. I used some markers to colour the 'icing' patterns, little nail art gems and added some extra resin then painted it white to look more like snow. It was fun and i have thought about getting another. I got mine at kmart for $13 aud
For the hot cocoa one, what I did was I put the brown resin on the outer plastic in the cup, set it, and then used extra resin from the other kits to fill the middle. It worked pretty well to make it still look like hot cocoa. They definitely need to find a better solution though.
I manifested this today. Thank you, universe. lol I bought the gingerbread house for me and my daughter.. wanted the Cocoa too but they were $36 CAD in my local AB store.. But at least I got to pick the one I wanted
For the gingerbread house perhaps a better technique would be to work vertically (down --> up) instead of in a horizontal manner (left --> right). That way you only have to support the gumdrop/whipped cream at the bottom, allowing the decorations to stack/lean against the bottom that you support before setting it. You can work column for column that way without it drooping too much.
I just found it today, by weighing the few in store in the produce section that I thought might be it haha! I looked crazy, but it worked! My Walmart scale said 0.24oz for the ball that was the Elf one
That's a good point on the gingerbread house. I think some tools that aren't included in the kit would be better to use, like a normal size craft tweezers to pick up the tiny parts. Love how you used your leftover items on other projects. You should have had enough resin in first project to complete the whole thing! My guess is if you are using the entire amount of resin and it is not coming out, maybe turning it upside down and putting a large pinhole in the bottom would work? You'd then have to have something to set it down on to keep it turned upside down while working with it to avoid leaks.
Jackie please get the mini brands books, the books can be open and it has REAL PAGES THAT YOU CAN READDD. I'm already getting excited, can't wait for you to unbox some
I found only one of these holiday edition miniverse at a target nearby to where I live. That happened to be the gingerbread house. :) I thought that you snapped the pieces together, but it wasn't until I found a tutorial online that showed the pieces being held together by the resin. The little gumdrop decorations tended to slide around unless you pushed them down a bit into the resin. I still haven't figured out the purpose of the ball to store it in. Note: For the resin in this kit (well all of them) Jackie, the instructions say to hold the resin bottle in your hands and warm it up a little bit. It makes the resin easier to pour out. :)
Today's my Birthday, but everyday's my birthday whenever you open a Mystery pack of something, Jackie! ^^ Also, would love to see you open mystery packs called Disney Doorables! They're fun to collect and you MIGHT find your favorite character in it! And there's certain themed packs, like movie packs and holiday packs! And might I suggest trying Disney's Speedstorm, if you're into racing games? ^^ They've recently added not only the characters from Disney's Frozen for the new season, but also Oswald the Lucky Rabbit and Ortensia the Cat, two characters from Walt Disney's cartoon shorts WAY before he opened his own studio OR drew Mickey Mouse! We fans affectionately call Oswald Mickey's "Big Brother". ^^
I do not know how to pronounce that you might not know about the two words what have r in them at the front so sorry but yeah 👍 but it's okay you're not mean 5:57
The resin being such a pain in the buns was exactly what I had to deal with when doing the Halloween edition ones! My son and I ended up just getting pliers to squeeze the resin for us to make it work. We wanted to give up so badly!
That’s probably my main problem with these is that they need to make the resin bottle out of a softer material so it’s easier to squeeze. Also, to keep things from sinking solidify the resin first then pour a bit more and then you can put the toppings on and freeze in place.
I got the gingerbread house and loved it. The other two seemed far too simple. I added my leftover gumdrops, whipped cream, the spatula, and the whipped cream can to the table under the cake stand holding the house. Really loved this one.
For my gingerbread house I did everything that I wanted to look like snow with the resin first and hardened it and then for the gumdrops and whipped cream I made a little puddle of resin on my silicone mat and dipped the bottom of each little piece into the resin before placing it on the house. That way it had enough resin to hold each piece but not so much that it went sliding down.
I did make the gingerbread house using sun. It was in Australia sun so it took two minutes. But from watching your videos, I learned to do it in stages. I built the house, glued it then let it sit. Then decorated one side of the roof, let it sit. And so on and so forth. It was actually fun. And I used resin to secure it to the cake plate they sent which gave me space to actually then decorate around the house as well. Totally fun and a great project for my daughter and I!
Jackie's a better person than I am, the moment that resin doesn't come out I'd be cutting open that container maybe the bottom or just cut the side off lol
Oh cool ! I was wainting for this video !!!!I'm just a the beginning of the video and just hope that you gonna found the special one, the "Elf movie" one.
Hiii, and how you had the problems with the hot chocolate, I can relate. I was super exited to get all 3 of the Halloween mini-verse and i went to do the cute bat pumpkin spice one the resin wouldn’t come out. I tried for about like an hour and only got 3/4 of the resin out and it looked a mess because resin got everywhere! I’m not sure if its just too thick or what but i really hope they fix it. I was actually pretty disappointed and i spent my own money on it :cc
I noticed the gumdrops were actually scented! I have the same gripes with the holiday collection besides the gingerbread house. They need to give more resin for the hot cocoa and add some more elements like seasoning for the turkey.
It took me forever to get my resin out. I had to tip it, wait, and let it slowly come out. It was plenty for both cups but it took forever. Worth the wait it is awesome looking.
Too bad about the Hot Chocolate, but the antics with getting the gumdrops in place had me chuckling. Gumdrops just didn't want to behave and frankly that happens to me EVERY TIME I put a Gingerbread House together. 😅
Today Jackie taught me the gingerbread house resin came with a nozzle 😂 when I opened mine I actually didn’t get one so used the knife to spread my resin around haha
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Sponsor: Download Dragon City for free & become a Dragon Master: dragoncity.onelink.me/DDHl/12crafter
Don't you have extra resin to add from other kits?
if you put the resin bottle in warm water making sure its not submerges in the water then the resin flows a lot better in the mini verse make it mini holiday sets. I love your videos Jackie
@@christinachitchat959she tried that dummy
There’s 4
Jackie, you really need to wear a respirator when doing resin products there’s a lot of bad side effects from being exposed resin and I know you have a health issues.
What they really failed at was that they could have turned the ball into an ornament display for a xmas tree
That would have been so smart! They really missed
This!
omg i love this idea want
This is an amazing idea!
I thought it did if you put the stand in the bottom and the part on the top half to hold a string and put the halves together again
The candles were scented because you don’t eat candles! They don’t want to risk people eating fake foods..as you do in fact usually eat food 😅
That’s the difference. Scenting something people don’t eat vs something people usually eat. Companies generally avoid scenting things like food if they resemble foods to avoid lawsuits, candles however are not food so they’re safe to scent.
Feels like an American thing tbh. Only Americans would try to eat a scented fake food toy.😅
People eat play doh, soooooo
@@recoveringsoul755 Play Doh is non toxic, meaning if it was accidentally consumed it would not cause major bodily harm. Should it be consumed? No, but it's better than eating literal resin.
@@GenderedMess it also has a scent and is made for children to play with
Same as crayons have a scent. Small children are known for putting things in their mouths. Lots of things have a scent. Maybe it's hard to make unscented products?
I don't think the scented candles argument is valid because soap is scented too, deliberately, and is definitely not good for eating
@@GenderedMess but wouldn't the Play Doh harden or will the stomic acid burn it?
Honestly, the gingerbread house experience was pretty much true to life. With royal icing, it starts off gloopy and takes a while to harden. You have to hold the house pieces together until the icing hardens, or else it collapses. And the decorations really do start to slide if you're not holding them in place. At least here, you can solidify the "icing" immediately. I know there are geniuses out there who can make a perfectly stunning gingerbread house, but I am not one of them, so mine always end up looking like the aftermath of a visit from the Big Bad Wolf XD
Since I don't eat my gingerbread houses, I stick the house part together with hot glue! Because you're right, holding the pieces long enough for the royal icing to harden is HARD. And I'm right there with you, my houses always look a little worse for wear by the time I'm done.
Just put a t-rex toys near by ;)
Little tip: Try doing most of the decorating BEFORE putting the house together. Like while the pieces can still lay flat. It's way easier to make candies stick that way. Then fine tune after putting the walls together.
Trying to glue a house together with royal icing is a nightmare!! We make candy and do that- it is so much faster and more reliable. Then we make THICK royal icing for the decorations. And you put the icing on the decoration, not on the house first. Once they’re all dry, you can put more royal icing to tidy it up.
Build a cardboard form first, then affix the pieces to it with a few small dots of melted chocolate to make it easier to hold. When I was a kid this was in part the job of the youngest child to hold a cheap chocolate bar piece until their fingers were coated in melty chocolate then touch the backs of the pieces before adults/teens put them against the forms. The child is then praised and sent off with a cookie to lick their fingers clean and be out of the way. The chocolate sets fast and makes it easy to pop the form inward and free after the royal icing has had a few days to fully cure. We assembled the buildings, let them cure two days, then removed the forms, decorated in stages over a few days - this let us tilt the houses to different angles as we worked on one or two faces at a time, drying for a few hours in between. Then moved to their display platters and touched up. Takes about 10 days to do one or two weeks if you are baking them from scratch as well. there's a lot of waiting for things to dry/cure.
Kits started releasing in the 90's and honestly the kits have always misrepresented the time commitment and tried to sell it as a 'fun afternoon or evening activity to do with kids, possibly on the holiday'. It's intentionally frustrating to incentivize buying more 'to try again'.
I’m so glad that Miniverse listened to customers and got rid of the foil seal that used to be on the resin. They’re so much easier to use now!
It’s unfortunately still a thing. You can see that the foil is stuck in the lids. All of mine still had them
Yeah they use always it, but jame in the lid
Universal fact: Jackie never fails to entertain us
that's too true
A Natural Law of the Universe, even ( 🥰)
So true!❤
@@milkompoukalo I wanna see Jackie play Spyro the Dragon on her Raging Raccoon Gaming channel! Ya know, since she likes dragons so much! Are u a subscriber of that channel?
Who's going to tell her there is 4 in this set...one is a rare
That is not a present
What??
The 4th one is candy spaghetti from the movie Elf
@@nerdecrafterlol! 😂❤
It's said to be hidden in the hot cocoa ball.
if you put the resin bottle in warm water making sure its not submerges in the water then the resin flows a lot better in the mini verse make it mini holiday sets. I love your videos Jackie
I actually have got the rare one. The buddy the elf spaghetti. It was really cool. It was actually kinda hard to make. But I know you could accomplish it. Tips on finding it: The shake is different the rare one has a little rattle and it weighs heavier than the normal one also it is wrapped in the hot cocoa wrapper. I’d love to see you make it on your channel so I hope those tips help!!!! Also I am a big fan of your channel!!!!!
I noticed for the gingerbread house was to use the spreader that the gingerbread kit gave you to apply resin. I'm guessing they wanted you to use the spreader to spread the resin instead of directly applying it to the roof with the bottle so it won't be as messy. Sorry it's quite difficult to explain I really love your videos they are so satysfying and fun! ❤
I think with the gingerbread house it would be better to maybe go in with some E-6000 or hot glue and glue the pieces together so you don't waste your resin. Then do one side at a time and keep it level while decorating and then hit it with UV. Then do another side, keep it level, etc..
Also, for the chocolate resin, I wonder if you would be able to poke a hole somewhere to allow some air flow to make it come out better??
They could've done decorative sugar cookies with milk!
That would've been super cute ...
I LOVE that you added the basting brush to the turkey! It made it just a little bit better and super cute. I think I would have added some cut up pieces of green paper on top to look like some sort of garnish, like parsley. 🤔
I love your videos ❤❤❤
hi jackie i just wanted to say thank you for helping me get through all these years, i’ve been watching you since i was about 12 and just your positivity and humour always lifted my moods when i was in tough spots and idk if this is weird to say but your my comfort youtuber, im 17 now and i still come back to watch your videos 💗
this is so sweet omg. im 18 and ive been watching her for awhile too. i hope everything is going well for you ❤
Ah holiday edition look so cute and cool with fine details
🎄💙🤍
For the gingerbread house, you can do it in sunlight if you decorate each piece first before assembling it. :]
Absolutely yeas. That's how i have decorated real ones since i realized it is way easier 😊
I think you just saved future me much frustration
well THATS genius!
Smarrrrrt!!!
There's a 4th one - Buddy the Elf's Candy Spaghetti Plate! - very elusive, but did see someone on here show it...
$15+tax CAD?!!! where?!!!
I finally found some at a local Showcase store, and they were $35+tx CAD!!!!
Please, where did you find them!!!!!
I'm hoping to find some on Amazon for cheap afterwards...the Halloween ones dropped price after, so 🤞🤞
Indigo!! They have em for 15!
Amazon has a three pack. Idk about canadian amazon
Also lolsuprise websit has the holiday balls and also series three cafe and diner!
I bought my first mini craft a couple of months ago. I bought the gingerbread house. It was a lot smaller than i was expecting, even after watching a lot of Jackies videos, but it was fun to put together. I did have a little uv light from a another craft to flash cure it be firm enough to hold its shape. I live in australia and its summer here so doing the full, final set outside wasn't an issue. I did do some personaliation. I used some markers to colour the 'icing' patterns, little nail art gems and added some extra resin then painted it white to look more like snow. It was fun and i have thought about getting another. I got mine at kmart for $13 aud
❤❤❤❤❤ love the video 😊😊
Mini verse make it Cafe series 3 . Has a jar of pickle 🥒 spears. Complete with mustard seeds. So cute
You're so good at art
The Buddy the Elf pasta one is my favorite in this series. The hot cocoa kit is the one I found my in.
Yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees ❤❤❤ the Best Video ever ❤❤❤
I'd love to see you do the gingerbread house like properly with time. I know you would be able to create a beautiful one! Def with sprinkles!
For the hot cocoa one, what I did was I put the brown resin on the outer plastic in the cup, set it, and then used extra resin from the other kits to fill the middle. It worked pretty well to make it still look like hot cocoa. They definitely need to find a better solution though.
I manifested this today. Thank you, universe. lol I bought the gingerbread house for me and my daughter.. wanted the Cocoa too but they were $36 CAD in my local AB store.. But at least I got to pick the one I wanted
For the gingerbread house perhaps a better technique would be to work vertically (down --> up) instead of in a horizontal manner (left --> right). That way you only have to support the gumdrop/whipped cream at the bottom, allowing the decorations to stack/lean against the bottom that you support before setting it. You can work column for column that way without it drooping too much.
JACKIIEEE PLEASE GETT THE MINI BRANDS BOOKSSS 😣🙏, I get really excited to comment about this everytime you post
I wish the books had more then 1-3 pages you could read.
Loving the Dr Jelly shirt! ❤
Would you ever do a collab with Aboard in Japan? Would be so cool seeing you and Chris together in a video.
Jackie is the only person I will watch do miniverse crafts. She’s the only one that I subscribe to that does them right 😂
You need to try and find the Buddy the Elf spaghetti one. I’ve heard it’s in the hot chocolate ball, but weighs more.
I just found it today, by weighing the few in store in the produce section that I thought might be it haha! I looked crazy, but it worked! My Walmart scale said 0.24oz for the ball that was the Elf one
Hi Jackie. Are you going to review Moriah Elizabeth's mini mystery plushies boxes that she has just released with Walmart?
Pleaseeee do mini brands books... I think you would love it. You can even put it in your doll house or mini rooms... ❤❤❤
That's a good point on the gingerbread house. I think some tools that aren't included in the kit would be better to use, like a normal size craft tweezers to pick up the tiny parts. Love how you used your leftover items on other projects. You should have had enough resin in first project to complete the whole thing! My guess is if you are using the entire amount of resin and it is not coming out, maybe turning it upside down and putting a large pinhole in the bottom would work? You'd then have to have something to set it down on to keep it turned upside down while working with it to avoid leaks.
Jackie is amazing she is so talented😊😊😊😊😊
Yay! I was hoping you would find this one, and just in time for the holidays. I love your videos so much and I love your reactions and crafts❤❤❤
Jackie please get the mini brands books, the books can be open and it has REAL PAGES THAT YOU CAN READDD. I'm already getting excited, can't wait for you to unbox some
It is only the first 1-3 pages you can read and the front and back cover.
Makes me want to try to put together a real gingerbread house with my mom & sister(if she wants to do it with us)🥰😅🥰
These are super cute!! ❤❤❤That gingerbread house….many many claps and applause!👏🏼
You could decorate the ginger bread house roof flat before assembling it then just do across the top last
I found only one of these holiday edition miniverse at a target nearby to where I live. That happened to be the gingerbread house. :) I thought that you snapped the pieces together, but it wasn't until I found a tutorial online that showed the pieces being held together by the resin. The little gumdrop decorations tended to slide around unless you pushed them down a bit into the resin. I still haven't figured out the purpose of the ball to store it in.
Note: For the resin in this kit (well all of them) Jackie, the instructions say to hold the resin bottle in your hands and warm it up a little bit. It makes the resin easier to pour out. :)
Today's my Birthday, but everyday's my birthday whenever you open a Mystery pack of something, Jackie! ^^
Also, would love to see you open mystery packs called Disney Doorables! They're fun to collect and you MIGHT find your favorite character in it! And there's certain themed packs, like movie packs and holiday packs!
And might I suggest trying Disney's Speedstorm, if you're into racing games? ^^ They've recently added not only the characters from Disney's Frozen for the new season, but also Oswald the Lucky Rabbit and Ortensia the Cat, two characters from Walt Disney's cartoon shorts WAY before he opened his own studio OR drew Mickey Mouse!
We fans affectionately call Oswald Mickey's "Big Brother". ^^
Jackie the queen has posted 🥰 (resisting the urge to say first)
🎉🎉🎉🎉🎉
13:06 ℕ𝕠𝕥 𝕓𝕖𝕚𝕟𝕘 𝕞𝕖𝕒𝕟 𝕓𝕦𝕥❤❤rong way round😊😊
I do not know how to pronounce that you might not know about the two words what have r in them at the front so sorry but yeah 👍 but it's okay you're not mean 5:57
Jackie, can I just say I absolutely love your shirt. Dr. Jelly all the way❤❤❤
❤
I really enjoyed the gingerbread house. My kiddo and I each made one and we had a blast. I hope they make them again next year.
The resin being such a pain in the buns was exactly what I had to deal with when doing the Halloween edition ones! My son and I ended up just getting pliers to squeeze the resin for us to make it work. We wanted to give up so badly!
Jackie I found mini brands books, you should try it.
Jackie's feeling festive now!
I'm getting cozy for this vid! 👌🎅
That’s probably my main problem with these is that they need to make the resin bottle out of a softer material so it’s easier to squeeze.
Also, to keep things from sinking solidify the resin first then pour a bit more and then you can put the toppings on and freeze in place.
The carrots & parsnips were so cute with the Turkey!
Yay!
I know I watch a lot of RUclipsrs, but I think you’re my favorite know what I know you are❤❤❤
I would mix the hot cocoa and the gingerbread house together to decorate the gingerbread house more❤️🧡💛💚💙💜
Comfort food … warm hugs … traditions … holidays
With the turkey the need mash potatoes, and green bean casserole. Then a new kit with apple and cherry pies and pumpkin.
Hiiii nerdecrafter love your videos soooo much ❤❤❤❤❤
Hii❤❤❤❤😊😊😊
I got the gingerbread house and loved it. The other two seemed far too simple. I added my leftover gumdrops, whipped cream, the spatula, and the whipped cream can to the table under the cake stand holding the house. Really loved this one.
For my gingerbread house I did everything that I wanted to look like snow with the resin first and hardened it and then for the gumdrops and whipped cream I made a little puddle of resin on my silicone mat and dipped the bottom of each little piece into the resin before placing it on the house. That way it had enough resin to hold each piece but not so much that it went sliding down.
I did make the gingerbread house using sun. It was in Australia sun so it took two minutes. But from watching your videos, I learned to do it in stages. I built the house, glued it then let it sit. Then decorated one side of the roof, let it sit. And so on and so forth. It was actually fun. And I used resin to secure it to the cake plate they sent which gave me space to actually then decorate around the house as well. Totally fun and a great project for my daughter and I!
THE QUEEN HAS POSTED (omg it's been 2 years since I watched her, she raised me lmao)
your videos are so interesting to watch and I love your videos ❤❤❤❤❤❤❤❤❤😊😊😊
Im glad kitty editor is a purrmanent team member. Hi kitty
Jackie's a better person than I am, the moment that resin doesn't come out I'd be cutting open that container maybe the bottom or just cut the side off lol
Awe, you got a Dr. jelly shirt! Awesome!
i love dragon city!! i have had it for many years and i play it daily 🐉 💚
Getting some of these and a miniverse kitchen for christmas!
Double YAY! ❤❤❤
I love that hot chocolate ❤❤
I just found out Miniverse Series 3 is available now!!!!!!!!!!! Please do some, I LOVE your tutorials!!!!
Merry Christmas, Jackie!
❤❤❤❤❤❤❤
I love your videos
you are an amazing person when im sad you alwas cher me up thanku for what you do and contitou what u do
Oh cool ! I was wainting for this video !!!!I'm just a the beginning of the video and just hope that you gonna found the special one, the "Elf movie" one.
luv it😍😝🤩
Preserve your SPOONS! ❤❤❤
Lol, these are so cute! Now I need to get some too
🩷🧡💛💚🩵💙💜
Happy Friday, Jackie=) Thank you for an awesome video=)
Love you❤hope you can make some more calendar videos
Hiii, and how you had the problems with the hot chocolate, I can relate. I was super exited to get all 3 of the Halloween mini-verse and i went to do the cute bat pumpkin spice one the resin wouldn’t come out. I tried for about like an hour and only got 3/4 of the resin out and it looked a mess because resin got everywhere! I’m not sure if its just too thick or what but i really hope they fix it. I was actually pretty disappointed and i spent my own money on it :cc
I had the same problem. I was only able to get the bat and the pumpkin pie, so I was so frustrated by that.
@@kirstenmaki4657 yeah it was a little disappointing
Oh! I made the gingerbread house it was my favorite I've been waiting so long for this video❤ I was excited to see how you made your gingerbread house
Thanks Jackie for this video👍❤
I noticed the gumdrops were actually scented! I have the same gripes with the holiday collection besides the gingerbread house. They need to give more resin for the hot cocoa and add some more elements like seasoning for the turkey.
Your bears in your kit are beautiful in your demonstrations but I could never do them. Lol the wasted paint trips my ocd.
It took me forever to get my resin out. I had to tip it, wait, and let it slowly come out. It was plenty for both cups but it took forever. Worth the wait it is awesome looking.
OH MY GOD THEY'RE SO SO CUTE
Jackie! I had the same problem with the hot chocolates!! I used spare resin from other kits just to get enough to finish it >
Y'all I can't wait for my calendar coming in the mail
There's a special ELF one as well its the spaghetti breakfast i would love to see you do it ❤
Too bad about the Hot Chocolate, but the antics with getting the gumdrops in place had me chuckling. Gumdrops just didn't want to behave and frankly that happens to me EVERY TIME I put a Gingerbread House together. 😅
I REMEMBER that goomba ginger bred house..I was like WOW Jackey!!😻
I would love if you could make another ginger house video.
I always laugh when I watch your video ❤
P.S. I love your shirt lol
Cute gingerbread house!! 🏠
This looks so cool
Today Jackie taught me the gingerbread house resin came with a nozzle 😂 when I opened mine I actually didn’t get one so used the knife to spread my resin around haha