nice video. Can you do the same but before ARM the house, to pre-check the sensors? for example IF the door/window sensor is open to notify you about this and when you close the door/window the system armed. How is it possible this?
The short answer is "Yes". It may benefit you you watch my video on the Heimdall app. ruclips.net/video/ls18zMhapAw/видео.html In that video I briefly go over the settings in Heimdall. One of the settings within the configuration of the Heimdall app is to perform a "Pre-Arming Check". After turning on this option you must then create a flow to perform the pre-arming check and to send a notification to users. In the flow you will use a "Heimdall" Card - "Sensor is Active at Arming" for your "WHEN" statement. This card is triggered when there is a sensor in active state when the Surveillance Mode is set to Armed or Partially Armed. A "Warning" tag will be generated by the active (open) sensor. you must the n ADD a "Push Notification" Card to the flow that will send the Warning to the selected user. The warning will notify the recipient that a sensor is active/"open". Hope this helps?
as I said last time, they need to upgrade it to the new z-wave 800 series and just make the ethernet standard. until then, I will stick with my old smartthings hub. Also great job on the video as always. Is heimdal secutity free?
@@tikass9901 No that’s not correct. All the apps that I currently have are free via the Homey App Store. As a matter, fact, I’ve never seen an app that had a cost associated with it within the store.
@@greganddk - Yes Greg, I still have the Push Notifications system command within my Homey Pro 2023. They don’t show up within the system commands panel initially, however, if you right click on the canvas area and select “Add “/ “Then…”, you should then see “Push Notifications” option within the system column.
@@BudsSmartHome I only have three options, Send Message to User, Send image with Message to user and Send message as morse to user. No confirm Yes/No options.
@@greganddk - That's exactly what I have as well. The three options you detailed, and no confirm, Yes/No options. I am not sure what the "confirm" option is for. Is this something you saw in the flows options previously?
@@greganddk - Ok. Thanks for the video timeline reference. That is very helpful... You can find this option when you select: "Add"/"And...", then select: "Push Notifications" and you will see the Card "Confirm - With -"
Please make a video regarding Heimdall, that would be great 🙂
I’ve got a planned for my next release.
Yes Bud! Heimdall is something I have started. Buy the way, I completely dropped Smartthings.
Hi Bill. Sounds like you made the leap to the Homey Pro hub? I’ll be featuring the Heimdall app in my next video.
nice video. Can you do the same but before ARM the house, to pre-check the sensors? for example IF the door/window sensor is open to notify you about this and when you close the door/window the system armed. How is it possible this?
The short answer is "Yes". It may benefit you you watch my video on the Heimdall app. ruclips.net/video/ls18zMhapAw/видео.html
In that video I briefly go over the settings in Heimdall.
One of the settings within the configuration of the Heimdall app is to perform a "Pre-Arming Check". After turning on this option you must then create a flow to perform the pre-arming check and to send a notification to users. In the flow you will use a "Heimdall" Card - "Sensor is Active at Arming" for your "WHEN" statement. This card is triggered when there is a sensor in active state when the Surveillance Mode is set to Armed or Partially Armed. A "Warning" tag will be generated by the active (open) sensor.
you must the n ADD a "Push Notification" Card to the flow that will send the Warning to the selected user. The warning will notify the recipient that a sensor is active/"open".
Hope this helps?
as I said last time, they need to upgrade it to the new z-wave 800 series and just make the ethernet standard. until then, I will stick with my old smartthings hub. Also great job on the video as always. Is heimdal secutity free?
I agree @FawziBreidi. As for the Heimdall app, yes, it is a free app.
hi Bud’s, I’ve heard majority app on homey pro are subscription, Is that right ?
@@tikass9901 No that’s not correct. All the apps that I currently have are free via the Homey App Store. As a matter, fact, I’ve never seen an app that had a cost associated with it within the store.
Hi Bud, do you still have the Push Confirm Notification in Homey? I have a Pro 2023, and dont have that option?
@@greganddk - Yes Greg, I still have the Push Notifications system command within my Homey Pro 2023. They don’t show up within the system commands panel initially, however, if you right click on the canvas area and select “Add “/ “Then…”, you should then see “Push Notifications” option within the system column.
@@BudsSmartHome I only have three options, Send Message to User, Send image with Message to user and Send message as morse to user. No confirm Yes/No options.
@@greganddk - That's exactly what I have as well. The three options you detailed, and no confirm, Yes/No options. I am not sure what the "confirm" option is for. Is this something you saw in the flows options previously?
@@BudsSmartHome Yes, alot talked about this, and I say it in you video, at: 4:09
@@greganddk - Ok. Thanks for the video timeline reference. That is very helpful...
You can find this option when you select: "Add"/"And...", then select: "Push Notifications" and you will see the Card "Confirm - With -"