HI, NICE JOB!! THEY LOOK GREAT!! AND THE SEQUENTIALS WORK REALLY NICE, ARE EYE-CATCHING, AND GO TOGETHER WITH THE STANDARD AMBER BULBS VERY NICE TOO!! A PRETTY CLEAN INSTALLATION!! GOOD JOB!! CHAS ORVIS, PLAINVILLE, CT. PS : THAT'S A NICE LOOKING DAKOTA YOU HAVE TOO!! I KNOW IT MUST GET SOME PRETTY LOUSY GAS MILEAGE, WHICH REALLY STINGS RIGHT NOW, BUT IT'S WILL BE A POPULAR "CLASSIC" TRUCK AGAIN, WHEN THE DAMN WAR IS OVER, AND GAS PRICES GO BACK DOWN!!
These look to have been discontinued on your site. I have seen reports of device failures with similar lights. Before I drill a hole in my grill, I'd want to know these won't fail shortly after installation.
Ordered the lights a few weeks ago and they just came in. The wires are too short, will have to splice 18 or so inches on to them. The lights are much longer than yours, going to have to trim about half an inch or so off them. Your Mav must be an XL, I have a hybrib Lariat and the engineers, in their infinite wisdom, wired them different and my grill doesn't budge no matter how many bolts you take out. Five hours today and I think I've figured out their wiring and I've just found some small wiring to splice in so with any luck I might get done before I have a meeting to go to tomorrow night. I'm glad I'm retired or I would have borrow a car to go to work. I would really like to have my '64 Galaxie 500 back!
@2Randomscrubs I received a these and I love them, but the wire attached to the LED’s are not long enough. I would be awesome if you can let me know what type of wire and what gauge it is, so that I can buy wire extension locally.
@@stevenkorjackii2062 it came with connectors that just push on to the existing wires and snap shut over them cutting into the insulated wire for a connection. It’s worked ok. The cheap Chinese lights gave up at almost the same time last month and if it ever stops raining this week I have a new pair from eBay to replace them. I think the new ones were $12 for a pair. They do look good when they work but obviously not built to last.
I'd say it doesn't do much on the look but definitely might add more safety to it which I'm all for and I'd probably put some in the back but not sure if it would look good or not. But yeah even tho I don't personally have a maverick I can appreciate the vids on it bc I do want one💯.
I bought 3 of your kits, including this turn signal and the LED bar across the top of the grill. You show the video in a Turbo motor. I have the Hybrid. Is the wiring harness the same? Do I connect with the same wires? Do I need to go to the back set and unhook my standard battery negative or positive cable before starting? I have been holding on to these parts for over a month. I do not want to mess up my truck's wiring harness if I do it incorrectly. Please reply in a timely matter!
Did you guys remove the listing for these? That's unfortunate since I really don't want to drop $200 on Bulleye Custom's DRL grill lights and these were awesome
Awesome lights, places my order on aug20, it was shipped aug30. Any idea how long does shipping take to Canada? My package has been going all over Miami area but hasn’t left that since. TIA
What would it take to make the Reflectors of the front fenders become turn signal lights also, that would be a safety addition. Because Ford trucks you can't see the turn signals from a 90 degree, (like at a stop sign). Nice! Cylon Warrior style leds XD
Would it not make more sense and look better to mount those lights behind the clear plastic lens above the turn signal (that has no light)...??? Then put a light bar at the top of the grill mimicking like the Lightning...???
Solid light mod. Will definitely be buying a kit when my truck arrives.
I’m hoping you guys get the fog lights rolled out as well. I will definitely buy a set & my dad wants them too
I second that also on the fog light.
Ordered a 2023. Hopefully by the time it arrives, fog lights will be available.
Looks really good the start up is cool!
HI, NICE JOB!! THEY LOOK GREAT!! AND THE SEQUENTIALS WORK REALLY NICE, ARE EYE-CATCHING, AND GO TOGETHER WITH THE STANDARD AMBER BULBS VERY NICE TOO!! A PRETTY CLEAN INSTALLATION!! GOOD JOB!! CHAS ORVIS, PLAINVILLE, CT. PS : THAT'S A NICE LOOKING DAKOTA YOU HAVE TOO!! I KNOW IT MUST GET SOME PRETTY LOUSY GAS MILEAGE, WHICH REALLY STINGS RIGHT NOW, BUT IT'S WILL BE A POPULAR "CLASSIC" TRUCK AGAIN, WHEN THE DAMN WAR IS OVER, AND GAS PRICES GO BACK DOWN!!
I’m liking those lights. Thanks for making this video! Now I wish I could get my hands on a new Maverick.
Thanks man, hopefully you get it soon!
These look to have been discontinued on your site. I have seen reports of device failures with similar lights. Before I drill a hole in my grill, I'd want to know these won't fail shortly after installation.
How to buy? Neither link works
Nice setup! Do the factory wire harness taps come in the kit? If not, where do you get them, part number? Thanks!
Why is this mod unavailable now?
Ordered the lights a few weeks ago and they just came in. The wires are too short, will have to splice 18 or so inches on to them. The lights are much longer than yours, going to have to trim about half an inch or so off them. Your Mav must be an XL, I have a hybrib Lariat and the engineers, in their infinite wisdom, wired them different and my grill doesn't budge no matter how many bolts you take out. Five hours today and I think I've figured out their wiring and I've just found some small wiring to splice in so with any luck I might get done before I have a meeting to go to tomorrow night. I'm glad I'm retired or I would have borrow a car to go to work.
I would really like to have my '64 Galaxie 500 back!
What are the measurements of the light's for the maverick
@2Randomscrubs
I received a these and I love them, but the wire attached to the LED’s are not long enough. I would be awesome if you can let me know what type of wire and what gauge it is, so that I can buy wire extension locally.
how about sequential taillights?
Looks awesome! Will grab some when my Maverick comes in.
Got mine installed today. Truck looks great.
Mind me asking how you spliced in?
@@stevenkorjackii2062 it came with connectors that just push on to the existing wires and snap shut over them cutting into the insulated wire for a connection. It’s worked ok. The cheap Chinese lights gave up at almost the same time last month and if it ever stops raining this week I have a new pair from eBay to replace them. I think the new ones were $12 for a pair. They do look good when they work but obviously not built to last.
Need to know how you spliced it in???
Aloha Do you have a video showing how to disassemble the grill to install the LEDS
Wow - Nice job! This video earned my subscription since I plan on ordering a 2023 Maverick - Can't find or order a 2022.. .
Do they also work sequence when the turn signal? All it showed was was hazard status
Yes they do
Are these lights not available any more? Nothing at the two links provided in the description. Good looking lights, where can someone get them?
can't wait to do this with my witchback DRL turn signals and get a trip on the top ehre the lariat has it and then I'll be bright!
Where can I buy your kit.
Looks awesome great video tks for sharing!
I'd say it doesn't do much on the look but definitely might add more safety to it which I'm all for and I'd probably put some in the back but not sure if it would look good or not. But yeah even tho I don't personally have a maverick I can appreciate the vids on it bc I do want one💯.
@0:31 there is a human just silently sitting and looking down in the back of that truck
Could you please make some cool replacement for the fender badge?
What size of lights did you use??? 6", 9", or 10"
I’m digging the lights! Good job boys!
Thank you!
any reason this wouldn't work on a 2009 ford focus ses?
What size are you using?
I want these lights but I cannot find them anywhere. Your links dont work anymore
Nice upgrade!
Thanks!
I bought 3 of your kits, including this turn signal and the LED bar across the top of the grill. You show the video in a Turbo motor. I have the Hybrid. Is the wiring harness the same? Do I connect with the same wires? Do I need to go to the back set and unhook my standard battery negative or positive cable before starting?
I have been holding on to these parts for over a month. I do not want to mess up my truck's wiring harness if I do it incorrectly. Please reply in a timely matter!
Did you guys remove the listing for these? That's unfortunate since I really don't want to drop $200 on Bulleye Custom's DRL grill lights and these were awesome
Where is the link to buy it? The one you posted didn't work
I dont see a link also I cant even find it on their site
We are working on a new better version if the lights that should be out soon!
@@2RandomScrubs Awesome cant wait to see it!
where can I find those DRL light
Is the link broken...
Where can I get a set of these lights ?
Nice job guys , I’m getting my maverick early Sept if you need some one to promote for you in vancouver Canada let me know Ausman.
That’s sick! Looks great
Looks good, nice job!
Can I have 2 on each side?
Awesome lights, places my order on aug20, it was shipped aug30. Any idea how long does shipping take to Canada? My package has been going all over Miami area but hasn’t left that since.
TIA
Hey, do you know if there is a place to install these on an XLT Ranger grill?
How much is the kit ?
Nice mod guys. Any thoughts on doing a set of fog lights on the lower corners of the front bummer?
Yeah we’re working on that at the moment
@@2RandomScrubs nice. That's something that's really missing on this truck.
Are these still available?? And do they work for any truck ? I got a 2011 Chevy Silverado
Looks sharp but I always wonder if ONLY leaving it taped on is a good idea for long term. Weather will make that pop out, IMO. What do you think?
if it's 3M tape it'll be good forever, that's all that holds the windows air deflectors on, and you know they can take some wind.
Wow I got to say that looks great!
Can we get the amber LED's a bit closer in color to the other standard amber parking lights?
They look the same in real life, the camera doesn’t do it justice
What would it take to make the Reflectors of the front fenders become turn signal lights also, that would be a safety addition. Because Ford trucks you can't see the turn signals from a 90 degree, (like at a stop sign).
Nice! Cylon Warrior style leds XD
How do I get sponsored?. Just took delivery of my Maverick!!!
Do you ship to Canada?
Question, do the wires just clip in? Like no need cut and tape, they just click in?
Curious about that myself
Do you sell for 2019 Toyota 4runner?
do you have these for the rear too?
My accessory shopping list just keeps getting longer. Now I just need a truck
Looks good!
Would it not make more sense and look better to mount those lights behind the clear plastic lens above the turn signal (that has no light)...??? Then put a light bar at the top of the grill mimicking like the Lightning...???
I need a website to get to a portal to order
Up top in the description, click on SHOW MORE
How much for the kit on the strip lights for the front
$80 at refinedtruck.com
I want to order one from RT portal. Is there a discount code?
Yes, 2RANDOMSCRUBS
@@2RandomScrubs Thank you, My Order Number: #00102. Waiting...
Thank you so much!
Those are sick
Thanks man!
$80?
Totally cool...
maybe its just the audio, but that engine sounds off... like overly clicky
Nice!!!
thank you based scrubs
Hi buddy
Still doing give away
That splice corrode decide 1year!! They’re the worst ever! No real mechanic would ever use them! Since your kit has them I will not be a buyer!!
Yes would like order the led light kit fir my maverick, send me your email address. Thank you.
Still waiting for reply.