Thanks sir! Gets ko na kung bakit naging 0 ang c2. sa ^3 pala ang x is 5 to 10 lang dapat value kaya nung 0 ang value ng x, so kaya naging 0 ang c2 tama po? Thanks again! Uulitin ko na sagutan ang summative ko.
@@ceboxsir pano po pag ginamit ko ay 2500 instead of 2499.75. ininput ko lang po kase sa calculator yung mga values di po ako nagdivide ng 3 sa 100 at sa 200.
Hi. 1. You just need to substitute the value of x at A in the equation of EIy', where x at A is equivalent to zero (0). 2. EIy' = 100(x^2) - 200(x-5)^2 + C1; where x = 0 and C1 = -2499.975 kN-m^2 3. EIy' = 100(0) - 200(0) - 2499.975, we consider (x-5)) = 0 in 200(x-5)^2 since this equation must be considered in the x direction at (5 < x < 10). Since we consider at A, where x=0 and that is < 5m, therefore (x-5) = 0. 4. EIy' = - 2499.975 kN-m^2 5. y' = -2499.975 / (200x10^3)(6x10^6) = -0.00208 rad
@@cebox Kaya po ba 5 m Yung distance dun sa 200(x-5)^3 Kasi Yung pinagmulan ay sa external load na 400 N? Pasensya na po medyo naguguluhan po ako... Thank you po!
@@nikkollanillo8201 Kasi lagpas ang x sa 5m, then ang 400 N ay iikot dun sa point hanggang sa x, ano distance ng 400 N dun sa point na yun? (x-5) po ang distance na yun. Nakalagay rin naman po sa drawing yung x-5. (Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
@@pebikyut1430 kN-m^2 po talaga unit ng EIy', pero kung kukunin niyo na ang y' mismo, dun makakacancel unit ng EI. Please refer at 6:16 kung paano kami nagunit analysis under sa EIy. (Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
May epekto po ba sa rotation ng slope if sa right or left ka nagcut ng beam. Sa left po kase ako nagcut at nakuha ko pong slops is positive 0.0020833. Same lang po sa sagot niyo pero nakapositive po.
Once na yung x value mo ay nagnegative, for example, x-5, at ang inassign mo na x is 0, then magiging -5, meaning, hindi na natin siya icoconsider, or sa madaling salita, 0 na yun. Why? Saan ba ginamit si x-5? Kay 400 N, now the question is, nasa x=0 ba ang 400 N? No. That's why, no moment effect ang 400 N sa x=0, kaya hindi na natin isasama si 66.667(x-5)^3.
You're welcome 😊 (Hello! It's been a while since we check comments on our channel. It just happen na abala kami sa work and pagcheck ng mga papers ng mga student namin. So, we want to apologize for a very late reply and want also to greet you a very happy new year!)
Kapag sinubstitute niyo po yung x value, yan po makukuha. (Sorry for the very late reply. Naging abala po sa pagpapaorder ng aming CE Box Merch tinyurl.com/4mvnu6yu and work stuff).
33.333(x^3) -66.667 (x-5)^3 + C1 (x) + 0 = 0 Substitute mo lang yung 10 sa x, makukuha mong C1 = -2499.9625. Siguro namalaik mata ako sa pagtingin ng value.
There's no trick or clue para malaman ang value ng x para makuha si C1. You just need to understand and learn the concept. Nasa introduction po yun ng topic namin sa DIM. Diniscuss namin itong concept na ito, as Boundary Condition. Here;s the link: ruclips.net/video/cifgPXgYugA/видео.htmlfeature=shared
If we will substitute 0 for x, then zero na po yung sa 100(x^2). Then sa 200(x-5)^2 po, zero pa rin po yan. Why? Cause that part of the moment caused by 400 N is only applied at 5m from A. As we are going to solve for the slope at A, where x = 0, andiyan po ba yung 400 N? Wala po. Meaning, 0 ang effect ni 400 N diyan, kaya we are considering it as zero (0). Para sa madaling analogy, if we substitute any value of x, then the moment arm, based on the equation, are the x, x-5, so on and so forth, became negative, then zero na po yung term ng equation na yun. Example, x-5, if we subs 0 to x, then 0 - 5, then - 5 ang answer for the moment arm, since negative na po yun, we will consider as zero. (Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
Ask ko lang po, sinubukan ko kasing gawin na counterclockwise yung moment sa simula, kaso ang nangyari po nag arrive naman sa same values sa lahat pero puro positive sign na siya mula sa c1, yung slope, at deflection. Lagi ba dapat clockwise lang po ba dapat palagi?
Hindi ko po alam paano po kayo tumukoy ng rotation sa moment. For example po, 200 N na ang ikot is clockwise, ginawa niyo pong counterclockwise? Why and How? Paano po siya naging counterclockwise? How po? (Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
Para malaman natin kung tama yung nakuha nating equations and answer sa deflection. Kung negative ang deflection sa problem na ito, dapat ang ikot ng slope is clockwise para magdeflect siya pababa. Not necessarily naman na isolve yung slope, pero kaya nga antin pinoprove para mapatunayan na tama.
Isasubstitute niyo lang po yung given or assigned x value then ang unknown mo na po nun ay C1. (Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
Hindi po. Nakakalimutan ko lang po talagang maglagay ng unit sa C1 and C2. Ang C1 po since nasa slope siya nung unang lumabas, that is, kN-m^2 and ang C2 naman, since sa deflection siya lumabas, that is, kN-m^3. (Sorry po for the very late responce, abala lang po sa work, masteral, and life.)
Check niyo po yung decimal point. Nasa 8.333 na po, wala po sa 8333.25. (Sorry for the very late reply. Naging abala na po sa work stuff and pagaasikaso ng aming CE Box Merchandise: tinyurl.com/ynw9u6jd).
Isasubstitute niyo lang po yung given or assigned x value then ang unknown mo na po nun ay C1. (Hello! It's been a while since we check comments on our channel. It just happen na abala kami sa work and pagcheck ng mga papers ng mga student namin. So, we want to apologize for a very late reply and want also to greet you a very happy new year!)
Try mo po ilagay sa calcu, -8333.25 x 1000^3, lalabas po -8.33 x 10^12. Kung hindi man po, may key po diyan sa calcu ninyo na ENG, pindutin niyo po yan para maging scientific notation po ang format. (Sorry po for the very late responce. Abala lang po sa work masters, and life.)
We need to determine C1 and C2 since it is unknown. We use 10meters kasi andun yung support. I suggest you to watch the introduction of this topic. :) Here's the link: ruclips.net/video/cifgPXgYugA/видео.html
Hello po sir may question po ako, regardless po sa exponent ni x basta kapag po ba Moment Equation N-m po ang unit, then kapag naman po Slope Eq N-m^2 then kapag po Deflection Eq N-m^3 naman po? eto po ung value nung equation bago po idivide sa EI. Thanks in advance po
pwede po mag ask, ang sagot ko po kasi sa C1=6666.67. ang ginawa ko po kasi is yung M is inarrange ko po muna bago nag integrate po. M=-200x + 2000 po ang kinalabasan
No. Hindi mo po yun ididistribute. Kapag naka parenthesis mo, meaning fixed yun at hindi mo ididistribute sa constant value. Nasa first part po ng video na ito ko diniscuss yun.
-2499.975 N-m^2 po kasi siya hindi po mm^2. (Sorry for the very late reply. Naging abala na po sa work stuff and pagaasikaso ng aming CE Box Merchandise: tinyurl.com/ynw9u6jd).
Gawin mong x = 0 para sa A since 0 ang distance nun, tapos sa B, x = 10m. Mukha po yatang hindi naman ninyo tinapos yung problem? Kasi yung C na tinatanong po ninyo is x=5m. Nasa video na po siya. (Sorry for the very late reply. Medyo abala sa work and paggawa ng thesis, but still we are hoping na makatulong pa rin ang sagot namin na ito. God bless po!)
Ahmm... hmmm... I think pwede po kayo magpause sa video? Or pwede niyo po balik-balikan yung part ng video na nalilito kayo? Kasi video po ito... hindi po ito live na tutorial, so hindi po kayo mahuhuli sa pakikinig kasi pwede niyo po siya ulit-ulitin. (Sorry for the late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
Hi. Inexplain ko po run, cinonvert muna natin yung -2499.975 N-m² into N-mm² , so: -2499.975 N-m² (1000² mm² /m² ) = -2.5x10^9 N-mm² . Then dinivide ko na lang siya ng EI para makuha yung -0.00208 rad. (Sorry for the late reply, nasa recovery period pa rin kasi ako from surgery. Thanks for understanding. God bless!)
No. It depends sa location ng support. Ang boudary condition ay hindi laging x=0, nagkataon lang na ang location ng support diyan ay nasa x=0. If nasa isang distance ang support, example, pin support at x=2m, then ang x ay 2m, then y = 0.
Hi. We want to add subtitle for all the videos here in CE Box but unfortunately, we are only two persons making and managing this channel. We're busy at our works too. But hopefully, when our schedule is not that full, may be we can add subtitles for all our videos. Thank you!
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks sir! Gets ko na kung bakit naging 0 ang c2. sa ^3 pala ang x is 5 to 10 lang dapat value kaya nung 0 ang value ng x, so kaya naging 0 ang c2 tama po? Thanks again! Uulitin ko na sagutan ang summative ko.
Yes tama. :)
Good luck sa sasagutan mo. God bless! :)
@@ceboxsir pano po pag ginamit ko ay 2500 instead of 2499.75. ininput ko lang po kase sa calculator yung mga values di po ako nagdivide ng 3 sa 100 at sa 200.
please brief me about the last result of slope, how you get -0.00208 rad
Hi.
1. You just need to substitute the value of x at A in the equation of EIy', where x at A is equivalent to zero (0).
2. EIy' = 100(x^2) - 200(x-5)^2 + C1; where x = 0 and C1 = -2499.975 kN-m^2
3. EIy' = 100(0) - 200(0) - 2499.975, we consider (x-5)) = 0 in 200(x-5)^2 since this equation must be considered in the x direction at (5 < x < 10). Since we consider at A, where x=0 and that is < 5m, therefore (x-5) = 0.
4. EIy' = - 2499.975 kN-m^2
5. y' = -2499.975 / (200x10^3)(6x10^6) = -0.00208 rad
@@cebox Kaya po ba 5 m Yung distance dun sa 200(x-5)^3 Kasi Yung pinagmulan ay sa external load na 400 N? Pasensya na po medyo naguguluhan po ako... Thank you po!
@@cebox pano mo naging kN*m^2 yung EIy'?? sabi nyo po sa vid icancel out lahat ng unit ee
@@nikkollanillo8201 Kasi lagpas ang x sa 5m, then ang 400 N ay iikot dun sa point hanggang sa x, ano distance ng 400 N dun sa point na yun? (x-5) po ang distance na yun. Nakalagay rin naman po sa drawing yung x-5.
(Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
@@pebikyut1430 kN-m^2 po talaga unit ng EIy', pero kung kukunin niyo na ang y' mismo, dun makakacancel unit ng EI. Please refer at 6:16 kung paano kami nagunit analysis under sa EIy.
(Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
thank very much CE Box, great channel for refresher CE topics
Thank you so much for the appreciation, @Brice_AC! 😇
@@cebox Sir, pwede po ba makahingi ng lecture notes nyo? pdf file
sir, what if di mo alam na yung ymax is x=5? in y' is zero hindi nag 5 yung x pag hindi kinancel out yung -200(x-5)^2
// 3:56
Ano po? Medyo 'di ka po namin gets...
(𝗦𝗼𝗿𝗿𝘆 𝗳𝗼𝗿 𝘁𝗵𝗲 𝘃𝗲𝗿𝘆 𝗹𝗮𝘁𝗲 𝗿𝗲𝗽𝗹𝘆. 𝗪𝗲'𝗿𝗲 𝗷𝘂𝘀𝘁 𝗯𝘂𝘀𝘆 𝘁𝗵𝗲𝘀𝗲 𝗽𝗮𝘀𝘁 𝗳𝗲𝘄 𝗺𝗼𝗻𝘁𝗵𝘀 𝗶𝗻 𝗼𝘂𝗿 𝗽𝘂𝗯𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝘀𝗮 𝗠𝗮𝘀𝘁𝗲𝗿𝗮𝗹, 𝘀𝗮 𝗧𝗵𝗲𝘀𝗶𝘀, 𝘄𝗼𝗿𝗸 𝘀𝘁𝘂𝗳𝗳, 𝗮𝗻𝗱 𝗹𝗶𝗳𝗲. 𝗛𝗼𝗽𝗲 𝗻𝗮 𝗻𝗮𝗸𝗮𝘁𝘂𝗹𝗼𝗻𝗴 𝗮𝗻𝗴 𝗖𝗘 𝗕𝗼𝘅 𝘀𝗮 𝗶𝗻𝘆𝗼𝗻𝗴 𝗽𝗮𝗴𝗮𝗮𝗿𝗮𝗹. 𝗧𝗵𝗮𝗻𝗸 𝘆𝗼𝘂 𝗮𝗻𝗱 𝗚𝗼𝗱 𝗯𝗹𝗲𝘀𝘀!)
Hello po, -24,999.625 po lumalabas ng sa C1 nung sinubstitute po yung x=10 m sa deflection equation. Thank you po
thank you po sa comment niyo, same rin po kasi nakuha ko akala ko ako yung nagkamali
Nakalimutan niyo po idivide ng 10, since yung nasa equation po ay C1(x).
Nakalimutan niyo po idivide ng 10, since yung nasa equation po ay C1(x).
May epekto po ba sa rotation ng slope if sa right or left ka nagcut ng beam. Sa left po kase ako nagcut at nakuha ko pong slops is positive 0.0020833. Same lang po sa sagot niyo pero nakapositive po.
sir ask lang po di poba may value yung c2? ang nakuha kopo kasi sa c2 is -8333.3375
Once na yung x value mo ay nagnegative, for example, x-5, at ang inassign mo na x is 0, then magiging -5, meaning, hindi na natin siya icoconsider, or sa madaling salita, 0 na yun. Why? Saan ba ginamit si x-5? Kay 400 N, now the question is, nasa x=0 ba ang 400 N? No. That's why, no moment effect ang 400 N sa x=0, kaya hindi na natin isasama si 66.667(x-5)^3.
Hindi po ba -2499.962 Ang Value ni C1? Using shift solved?
Decimal lang po difference, okay na po iyon. 😇
(𝗦𝗼𝗿𝗿𝘆 𝗳𝗼𝗿 𝘁𝗵𝗲 𝘃𝗲𝗿𝘆 𝗹𝗮𝘁𝗲 𝗿𝗲𝗽𝗹𝘆. 𝗪𝗲'𝗿𝗲 𝗷𝘂𝘀𝘁 𝗯𝘂𝘀𝘆 𝘁𝗵𝗲𝘀𝗲 𝗽𝗮𝘀𝘁 𝗳𝗲𝘄 𝗺𝗼𝗻𝘁𝗵𝘀 𝗶𝗻 𝗼𝘂𝗿 𝗽𝘂𝗯𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝘀𝗮 𝗠𝗮𝘀𝘁𝗲𝗿𝗮𝗹, 𝘀𝗮 𝗧𝗵𝗲𝘀𝗶𝘀, 𝘄𝗼𝗿𝗸 𝘀𝘁𝘂𝗳𝗳, 𝗮𝗻𝗱 𝗹𝗶𝗳𝗲. 𝗛𝗼𝗽𝗲 𝗻𝗮 𝗻𝗮𝗸𝗮𝘁𝘂𝗹𝗼𝗻𝗴 𝗮𝗻𝗴 𝗖𝗘 𝗕𝗼𝘅 𝘀𝗮 𝗶𝗻𝘆𝗼𝗻𝗴 𝗽𝗮𝗴𝗮𝗮𝗿𝗮𝗹. 𝗧𝗵𝗮𝗻𝗸 𝘆𝗼𝘂 𝗮𝗻𝗱 𝗚𝗼𝗱 𝗯𝗹𝗲𝘀𝘀!)
Salamat po! This is very helpful
You're welcome 😊
(Hello! It's been a while since we check comments on our channel. It just happen na abala kami sa work and pagcheck ng mga papers ng mga student namin. So, we want to apologize for a very late reply and want also to greet you a very happy new year!)
bakit po naging -2499.975 yung EIy prime sa slope?
-2500 kapag fraction yung 100/3 tapos 200/3
Kapag sinubstitute niyo po yung x value, yan po makukuha.
(Sorry for the very late reply. Naging abala po sa pagpapaorder ng aming CE Box Merch tinyurl.com/4mvnu6yu and work stuff).
Sir, tanong ko lang po. hindo ko po alam saan mali ko, but my C1=-2499.9625. same values naman po, tapos nag shift solve lang po ako sa calculator.
33.333(x^3) -66.667 (x-5)^3 + C1 (x) + 0 = 0
Substitute mo lang yung 10 sa x, makukuha mong C1 = -2499.9625. Siguro namalaik mata ako sa pagtingin ng value.
Mine is 24999.625🥲 den realized i did divide 10
Salamat po
You're welcome! 😊
Hello po ano pong trick or clue para malamab what value of x ang substitute para makuha ang C1
There's no trick or clue para malaman ang value ng x para makuha si C1. You just need to understand and learn the concept. Nasa introduction po yun ng topic namin sa DIM. Diniscuss namin itong concept na ito, as Boundary Condition. Here;s the link: ruclips.net/video/cifgPXgYugA/видео.htmlfeature=shared
goodm po, bakit 833.325 yung nakukuha kopo? sa substitution ng x = 5m?
Tama po yung computation dito. Try mo na lang po ulit magcompute. Baka may nakaligtaan ka sa calculator po ninyo.
Bakit po naging -8333.25 yung EIy?
Substitute mo lang po yung x = 5m sa equation for EIy.
Example: EIy = 33.333(x^3) - 66.667(x-5)^3 - 2499.975(x) = -8333.25
bkt naging zero ung 100(x)^2-200(x-5)^2 sa slope at a?
consider x=0
If we will substitute 0 for x, then zero na po yung sa 100(x^2). Then sa 200(x-5)^2 po, zero pa rin po yan. Why? Cause that part of the moment caused by 400 N is only applied at 5m from A. As we are going to solve for the slope at A, where x = 0, andiyan po ba yung 400 N? Wala po. Meaning, 0 ang effect ni 400 N diyan, kaya we are considering it as zero (0). Para sa madaling analogy, if we substitute any value of x, then the moment arm, based on the equation, are the x, x-5, so on and so forth, became negative, then zero na po yung term ng equation na yun.
Example, x-5, if we subs 0 to x, then 0 - 5, then - 5 ang answer for the moment arm, since negative na po yun, we will consider as zero.
(Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
Ask ko lang po, sinubukan ko kasing gawin na counterclockwise yung moment sa simula, kaso ang nangyari po nag arrive naman sa same values sa lahat pero puro positive sign na siya mula sa c1, yung slope, at deflection. Lagi ba dapat clockwise lang po ba dapat palagi?
Hindi ko po alam paano po kayo tumukoy ng rotation sa moment. For example po, 200 N na ang ikot is clockwise, ginawa niyo pong counterclockwise? Why and How? Paano po siya naging counterclockwise? How po?
(Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
di ko po magets pano naging -0.00208
divide mo lang yung -2.5*10^9 sa EI
bakit po hindi na ginamit yung -200(5-x)^2 sa pag solve ng ymax
for deflection na kasi bro yung ymax
Sir good morning po. bakit pa kailangang iprove na yung slope at A is negative. Pwede naman po na di na yun isolve diba?
Para malaman natin kung tama yung nakuha nating equations and answer sa deflection. Kung negative ang deflection sa problem na ito, dapat ang ikot ng slope is clockwise para magdeflect siya pababa. Not necessarily naman na isolve yung slope, pero kaya nga antin pinoprove para mapatunayan na tama.
Sige Sir. Maraming salamat po.
sir clarify ko lang po. Kapag ang y ay negative, negative na rin po ang y'? Like yung sa ymax. thank you po
Ano po?
(Sorry for the very late reply. Naging abala po sa pagpapaorder ng aming CE Box Merch tinyurl.com/4mvnu6yu and work stuff).
Bakit po sa EIy equation, sa part na 66.667(x-5)^3, bakit po siya mag zezero? Di po ba siya maiiiwanan ng -5?
Magzero siya under x=0, since ang x natin is 0, meaning wala siya sa boundary ng (x-5) dahil ang boundary ng (x-5) ay greater than 0 but less than 5.
Sir may tanong ho paano no po nakuha ung 8333.25 Nm?
Isasubstitute niyo lang po yung given or assigned x value then ang unknown mo na po nun ay C1.
(Sorry for the very, very late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
bakit po ang sagot sa calc ko using shift solve is -833.325? di thousands? complete naman po ininput ko
@@cebox
Hi Sir. Hindi po ba yung boundary condition na x=0 and y=0 is may Value ang C2 na -8333.375?
Refer to the pinned comment.
sir pano mo po nakuha yung -8333.25?
Sinubstitute lang po yung 5m sa equation sa deflection para makuha yung -8333.25.
@@cebox -833.325 po lumabas sa calcu sir
@@aprilmalicdem7091 Dinouble check ko na po siya, 8333.25 pa rin po lumabas. Pakicheck po yung nainput po ninyong value.
@@cebox kuha ko na po arigathanks
sir yung equation po na -200 (x-5)^2 diba may maiiwan po na -5 bakit po naging zero lahat ?
Panuorin mo ito Torres: ruclips.net/video/RoKKRk2I7dU/видео.html @10:39
Inexplain namin run.
(𝗦𝗼𝗿𝗿𝘆 𝗳𝗼𝗿 𝘁𝗵𝗲 𝘃𝗲𝗿𝘆 𝗹𝗮𝘁𝗲 𝗿𝗲𝗽𝗹𝘆. 𝗪𝗲'𝗿𝗲 𝗷𝘂𝘀𝘁 𝗯𝘂𝘀𝘆 𝘁𝗵𝗲𝘀𝗲 𝗽𝗮𝘀𝘁 𝗳𝗲𝘄 𝗺𝗼𝗻𝘁𝗵𝘀 𝗶𝗻 𝗼𝘂𝗿 𝗽𝘂𝗯𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝘀𝗮 𝗠𝗮𝘀𝘁𝗲𝗿𝗮𝗹, 𝘀𝗮 𝗧𝗵𝗲𝘀𝗶𝘀, 𝘄𝗼𝗿𝗸 𝘀𝘁𝘂𝗳𝗳, 𝗮𝗻𝗱 𝗹𝗶𝗳𝗲. 𝗛𝗼𝗽𝗲 𝗻𝗮 𝗻𝗮𝗸𝗮𝘁𝘂𝗹𝗼𝗻𝗴 𝗮𝗻𝗴 𝗖𝗘 𝗕𝗼𝘅 𝘀𝗮 𝗶𝗻𝘆𝗼𝗻𝗴 𝗽𝗮𝗴𝗮𝗮𝗿𝗮𝗹. 𝗧𝗵𝗮𝗻𝗸 𝘆𝗼𝘂 𝗮𝗻𝗱 𝗚𝗼𝗱 𝗯𝗹𝗲𝘀𝘀!)
Unitless po ba ang C1?
Hindi po. Nakakalimutan ko lang po talagang maglagay ng unit sa C1 and C2.
Ang C1 po since nasa slope siya nung unang lumabas, that is, kN-m^2 and ang C2 naman, since sa deflection siya lumabas, that is, kN-m^3.
(Sorry po for the very late responce, abala lang po sa work, masteral, and life.)
Boss paano naging 200x10^3 ang sa "y" diba ^7 un?
GPa = 1000 MPa or 10^3 MPa
MPa = N/mm^2
GPa = 10^3 MPa = 10^3N/mm^2
sir ask lang po pani siya naging 1 x 10¹² instead of 1x10⁹ mm³
Check niyo po yung decimal point. Nasa 8.333 na po, wala po sa 8333.25.
(Sorry for the very late reply. Naging abala na po sa work stuff and pagaasikaso ng aming CE Box Merchandise: tinyurl.com/ynw9u6jd).
Hello sir. Bat po and EIy is =-8333.25? kasi ang akin kasi sir is 16666.5 ... nag divide 2 ka po ba sir?
multiply mo ng 5 yung value sa C1
Thank you for answering his concern po @Jasper June Andoy.
(Sorry for late reply. Medyo naging abala sa buhay. God bless po!)
sir pano nakuha yung -8333.25?
Isasubstitute niyo lang po yung given or assigned x value then ang unknown mo na po nun ay C1.
(Hello! It's been a while since we check comments on our channel. It just happen na abala kami sa work and pagcheck ng mga papers ng mga student namin. So, we want to apologize for a very late reply and want also to greet you a very happy new year!)
sir goodeve pano po makuha yung elastic curve equation
Ahmmm, elastic curve equation is yung equation na po ng deflection.
(Sorry for late reply. Medyo naging abala sa buhay. God bless po!)
naguguluan po ako sa conversion, bakit po naging 12 yun?
Try mo po ilagay sa calcu, -8333.25 x 1000^3, lalabas po -8.33 x 10^12. Kung hindi man po, may key po diyan sa calcu ninyo na ENG, pindutin niyo po yan para maging scientific notation po ang format.
(Sorry po for the very late responce. Abala lang po sa work masters, and life.)
@@cebox -8.33325x10^6 po ata dapat pag ginawang mm
@@renzgarais6133 baka minultiply niyo lang ata sa 1000 dapat 1000^3 since m³
Good evening. Ask ko lang po bakit pag kukunin ang value ng C1, ang dapat iconsider ay yung nasa 10 meters?
We need to determine C1 and C2 since it is unknown. We use 10meters kasi andun yung support. I suggest you to watch the introduction of this topic. :) Here's the link: ruclips.net/video/cifgPXgYugA/видео.html
Pano po nakuha ang C1??
isubstitute mo lang po yung 10m sa x, then makukuha mo na po yung C1.
Ok salamat po
Hello po sir may question po ako, regardless po sa exponent ni x basta kapag po ba Moment Equation N-m po ang unit, then kapag naman po Slope Eq N-m^2 then kapag po Deflection Eq N-m^3 naman po? eto po ung value nung equation bago po idivide sa EI. Thanks in advance po
Yes po. Try this playlist sa StreMa ng CE Box, diniscuss ko rin bakit ganun yung unit: tinyurl.com/xhdmfuyn
Mas detailed pa discussion ko rito.
@@cebox maraming salamat po!
You're welcome!
pwede po mag ask, ang sagot ko po kasi sa C1=6666.67. ang ginawa ko po kasi is yung M is inarrange ko po muna bago nag integrate po. M=-200x + 2000 po ang kinalabasan
No. Hindi mo po yun ididistribute. Kapag naka parenthesis mo, meaning fixed yun at hindi mo ididistribute sa constant value. Nasa first part po ng video na ito ko diniscuss yun.
Ito po yung link: ruclips.net/video/KQ_S6ynKsDU/видео.html
Yung discussion ko po na yun ay nasa 7:06.
@@cebox salamat poooo
I was confused when u are converting the -2.499.975 to N.mm^2. hindi po ba raise to 3 ung 1000 para makuha na -2.5x10^12??
-2499.975 N-m^2 po kasi siya hindi po mm^2.
(Sorry for the very late reply. Naging abala na po sa work stuff and pagaasikaso ng aming CE Box Merchandise: tinyurl.com/ynw9u6jd).
@@cebox2.499 x10^3
Hi, paexplain naman po bakit magiging zero yung C2?
Refer to the pinned comment.
sir pano naman po pag kunin yung rotation at deflection in specific point , like sa point A ,C at B .
Gawin mong x = 0 para sa A since 0 ang distance nun, tapos sa B, x = 10m. Mukha po yatang hindi naman ninyo tinapos yung problem? Kasi yung C na tinatanong po ninyo is x=5m. Nasa video na po siya.
(Sorry for the very late reply. Medyo abala sa work and paggawa ng thesis, but still we are hoping na makatulong pa rin ang sagot namin na ito. God bless po!)
sir suggest lng. sna po wg masyado mabilis kc kagaya ko slow learner😁✌️
Ahmm... hmmm... I think pwede po kayo magpause sa video? Or pwede niyo po balik-balikan yung part ng video na nalilito kayo? Kasi video po ito... hindi po ito live na tutorial, so hindi po kayo mahuhuli sa pakikinig kasi pwede niyo po siya ulit-ulitin.
(Sorry for the late reply as CE Box is very busy with his Master's Degree, Accreditation, Work Stuff, and Life. Thank you for understanding. Keep in touch with CE Box as we plan to do more video tutorials.)
@@cebox i mean sir ung bilis ng salita neo gnun, hndi ung bilis ng topic sir. sorry sa misunderstading hehe.
@@jakkjakk3508 meron po playback speed si RUclips. Pwede niyo po islow down yun vid.
bakit po 4.999 ang sagot sa X hindi po ba -4.999 dapat
Pakidouble check po. Positive po dapat yun.
Paano naging zero yung -200(0-5)²
0 na if ang x sa (x-5) is 0 or lesser than 5
@queenieladinecervo4517 Thank you po for clarifying his/her concern po! God bless po! 😊😇
sir ymax ko po is -6.944*10^-6
Thanks sir ask ko lang paano po mainput yung EIY sa calcu sir thankyouuu sa responseee
Dito po may calcu kami na pinapakita sa video: ruclips.net/video/RoKKRk2I7dU/видео.html
(𝗦𝗼𝗿𝗿𝘆 𝗳𝗼𝗿 𝘁𝗵𝗲 𝘃𝗲𝗿𝘆 𝗹𝗮𝘁𝗲 𝗿𝗲𝗽𝗹𝘆. 𝗪𝗲'𝗿𝗲 𝗷𝘂𝘀𝘁 𝗯𝘂𝘀𝘆 𝘁𝗵𝗲𝘀𝗲 𝗽𝗮𝘀𝘁 𝗳𝗲𝘄 𝗺𝗼𝗻𝘁𝗵𝘀 𝗶𝗻 𝗼𝘂𝗿 𝗽𝘂𝗯𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝘀𝗮 𝗠𝗮𝘀𝘁𝗲𝗿𝗮𝗹, 𝘀𝗮 𝗧𝗵𝗲𝘀𝗶𝘀, 𝘄𝗼𝗿𝗸 𝘀𝘁𝘂𝗳𝗳, 𝗮𝗻𝗱 𝗹𝗶𝗳𝗲. 𝗛𝗼𝗽𝗲 𝗻𝗮 𝗻𝗮𝗸𝗮𝘁𝘂𝗹𝗼𝗻𝗴 𝗮𝗻𝗴 𝗖𝗘 𝗕𝗼𝘅 𝘀𝗮 𝗶𝗻𝘆𝗼𝗻𝗴 𝗽𝗮𝗴𝗮𝗮𝗿𝗮𝗹. 𝗧𝗵𝗮𝗻𝗸 𝘆𝗼𝘂 𝗮𝗻𝗱 𝗚𝗼𝗱 𝗯𝗹𝗲𝘀𝘀!)
Bakit dinivide yung -2499.975 sa 1000⁴ if N.mm² lang ang hinahanap?
Diba ung c1 naten pre is naka meter.
Hi. Inexplain ko po run, cinonvert muna natin yung -2499.975 N-m² into N-mm² , so:
-2499.975 N-m² (1000² mm² /m² ) = -2.5x10^9 N-mm² .
Then dinivide ko na lang siya ng EI para makuha yung -0.00208 rad.
(Sorry for the late reply, nasa recovery period pa rin kasi ako from surgery. Thanks for understanding. God bless!)
sir good evening lagi po bang x=0 at y=0 yung unang boundary condition?
No. It depends sa location ng support. Ang boudary condition ay hindi laging x=0, nagkataon lang na ang location ng support diyan ay nasa x=0. If nasa isang distance ang support, example, pin support at x=2m, then ang x ay 2m, then y = 0.
Sir positive po yung nkuha ko 8333.25
Hindi mo pa po nilalagay sa kabilang equation kaya positive nakuha mo.
@@cebox ok na po sir. Thank you po
how i wish you were using English
Hi. We want to add subtitle for all the videos here in CE Box but unfortunately, we are only two persons making and managing this channel. We're busy at our works too. But hopefully, when our schedule is not that full, may be we can add subtitles for all our videos. Thank you!