OMG instructions online that actually works! Thank you so much for this! My team is using AWS with AWS managed AD, along with workspaces and EC2 servers. The few commands here did the trick
Thank You Thank You Thank You!!! This was the only tutorial I could find that actually worked!!! I've been trying for two days to authenticate domain users on the Ubuntu server and you are the only one who taught me correctly how to do it. Subscribed!
I recently switched my dev laptop from Windows 11 to pop_os 22 but had trouble getting it joined to AD. I ran the usual realmd install but whenever I tried to sign into the OS from the GUI, I got a grey screen. When I tried it from a console I got a message stating it couldn't figure out what my home folder was, so it defaulted to /. Not good. After a day of fiddling with kererbros defaults, I found this video and it fixed the problem immediately! Thank you!
After replicating your "admin" for root access, I am getting error that the user is not authorised to do sudo su and yet the user in in that admin group in domain controller. Not sure when I need fix. Otherwise thanks.
I'm stuck at realm discover. It says there is no such realm. My DNS server sits inside a home server, so the gateway and the DNS server are not the same...maybe that's why, i just don't know how to do it in my case
I used realm discover but it couldnt found my domain, I used machine IP for DNS setting and probably thats where my mistake is. How can I learn my domains DNS thing?
Hi , can you please tell me how to perform the sudo vim/etc/resolv.conf i am unable to resolve the host and getting temporary failure in name resolution and sudo:vim: command cannot found
I followed the same step but there is some thing not right with this config as I see its allowing every login even you enter a wrong password. I am looking to see how to fix it.
I must be missing something, this works until I reboot, then the resolv.conf gets truncated and breaks DNS. Only way I've been able to fix is to enable/start systemd-resolved.service, edit the resolv.conf again, then stop/disable. Which will work until I reboot again.
Hello, I need help, installed ubunto 20.04, but add domian, i have this See: journalctl REALMD_OPERATION=r16127.10824 realm: Couldn't join realm: Failed to join the domain
If ubuntu linux client finds windows server and dns, but domain not found. What could be the reason? You can try telnet connet to 53 port and it works. I try to understand more.
The problem started at 4:14 * Using GSS-SPNEGO for SASL bind ! Couldn't authenticate to active directory: SASL(-4): no mechanism available: No worthy mechs found adcli: couldn't connect to Homelab.local domain: Couldn't authenticate to active directory: SASL(-4): no mechanism available: No worthy mechs found ! Insufficient permissions to join the domain realm: Couldn't join realm: Insufficient permissions to join the domain
You have nowhere mentioned about starting sssd service. When you start sssd.service then it will check for /etc/krb5.keytab which is not automatically created. So I am sorry to say that the information provided in this video is not satisfactory.
OMG instructions online that actually works! Thank you so much for this! My team is using AWS with AWS managed AD, along with workspaces and EC2 servers. The few commands here did the trick
THANKS! You are the ONLY tutorial I found in like 2 hours or so, that actually worked
Cool stuff - I've never joined a Linux box to AD before, so this is helpful.
Awesome! It's a great addition to any home lab 😉
Thank You Thank You Thank You!!! This was the only tutorial I could find that actually worked!!! I've been trying for two days to authenticate domain users on the Ubuntu server and you are the only one who taught me correctly how to do it. Subscribed!
I think it would be helpful you included all the commands you ran in the description to the video! Great Content Conda!
Thanks for the feedback! I will keep this in mind for future videos.
@@c0nd4 yes please. You go through them so fast I need to stop do them so I can keep up. Also please increase the size of the fonts.
I recently switched my dev laptop from Windows 11 to pop_os 22 but had trouble getting it joined to AD. I ran the usual realmd install but whenever I tried to sign into the OS from the GUI, I got a grey screen. When I tried it from a console I got a message stating it couldn't figure out what my home folder was, so it defaulted to /. Not good. After a day of fiddling with kererbros defaults, I found this video and it fixed the problem immediately! Thank you!
Thanks so much for this super guide! It worked perfectly! I look forward to more such stuff. Good job and keep it up.
After replicating your "admin" for root access, I am getting error that the user is not authorised to do sudo su and yet the user in in that admin group in domain controller. Not sure when I need fix. Otherwise thanks.
The quality of your videos is great! Thank you for doing this!
No problem! Thank you for the support
It worked like a charm! Thank you!
Thanks a lot! Really helpful
pretty easy tutorial, helped me find the step i forgot
Awesome video, thank you so much! Thought this would have taken much longer!
permission denied when trying to login.
next time I will search RUclips first before Google...Good job brother...
Worked perfectly. Thanks Conda..
I'm stuck at realm discover. It says there is no such realm. My DNS server sits inside a home server, so the gateway and the DNS server are not the same...maybe that's why, i just don't know how to do it in my case
I used realm discover but it couldnt found my domain, I used machine IP for DNS setting and probably thats where my mistake is.
How can I learn my domains DNS thing?
I wrote "DNS setting > IPv4 DNS server" but it still cant find my domain
Checked it from server manager and its same IP with internet settings thing
in your terminal screen enlarge the font so a person can actually read whats going on.
Hi , can you please tell me how to perform the sudo vim/etc/resolv.conf i am unable to resolve the host and getting temporary failure in name resolution and sudo:vim: command cannot found
Vim is a texteditor. You can use also sudo nano.
How are you able to edit the nameserver address? When I try to change it, none of my changes register, it's like the page cannot be edited.
this is really great, but can you please make the font bigger
Definitely will do in the future. Thanks for the feedback!
Thanks, man!! appreciate you help!
This is the one that worked for me!
I followed the same step but there is some thing not right with this config as I see its allowing every login even you enter a wrong password. I am looking to see how to fix it.
If I run id for any of the AD server user, it does not shows the correct uid/gid of user and group it is part of, do you know how to fix that?
2:24 Im having an issue with Resolv.config - the whole file is empty and I do not what was shown in the vid. Any ideas why?
me too. i hope we find someone who can help us.
@@dada0900 If It's empty just type nameserver then go to the next line and type search
thank you for the video i have to move our ubuntu desktops from 1 active directory domain to another do you any helpful tips?
After finishing everything really worked and I can access with the users. But access to web pages and the internet is not enabled, what could it be?
you are the best... very very clear and TOP .. Thanks a lot.. MERCI
Thank you for the support 😁
Which one is the windows set up video? It's not linked as said on the video.
This was really helpful and precise. Thanks!
Hello, can I specify only certain users to access SSH?
I must be missing something, this works until I reboot, then the resolv.conf gets truncated and breaks DNS. Only way I've been able to fix is to enable/start systemd-resolved.service, edit the resolv.conf again, then stop/disable. Which will work until I reboot again.
The sudo systemctl set-hostname should be as $ sudo systemctl set-hostname conda.local not ubu-1.conda.local. This helps to alleviate confusion
Hello, I need help, installed ubunto 20.04, but add domian, i have this See: journalctl REALMD_OPERATION=r16127.10824
realm: Couldn't join realm: Failed to join the domain
Hey, did you make sure to install all of the packages shown in the beginning of the video? Missing packages can cause that error to occur.
Can an Active directory be used along with other Linux servers? If yes, how? If no, Why?
If ubuntu linux client finds windows server and dns, but domain not found. What could be the reason? You can try telnet connet to 53 port and it works. I try to understand more.
Maybe it is that you have to edit resolv.conf? It won't work with out it?
What good is it to join a Linux computer to a Windows server domain controller
Are you running ESXi on a physical server or on a vm??
I run it on a physical server
Did you know why i cann't change the password in first login or after for a user?
Interesting! thanks bud ;)
No problem man! Thanks for watching!
The problem started at 4:14
* Using GSS-SPNEGO for SASL bind
! Couldn't authenticate to active directory: SASL(-4): no mechanism available: No worthy mechs found
adcli: couldn't connect to Homelab.local domain: Couldn't authenticate to active directory: SASL(-4): no mechanism available: No worthy mechs found
! Insufficient permissions to join the domain
realm: Couldn't join realm: Insufficient permissions to join the domain
did you solved it?
I solved it if u want i can tell you how
@infrastacture tech : I am still looking for a solution for that…please show me how
Got something similar. What helped: synchronizing clocks on ubuntu and win server
Hi, does the IP of your linux VM matter? What about the network adapters? Thanks :)
Can we add windows machine to linux domain server? if yes , any reference on how to do that
Please help me on How to apply windows server group policy to Linux client
very helpful
Hi , I have this kind of issue can you help me. what is issue here ?? realm: Cannot join this realm
You want a challenge? Try to do the same, and implement Smart Card authentication...
Or fingerprint authentication from such as the Lenovo X230. Now that's fun.
I think the screen resolution could be set properly. It looks so small :-(
can someone explain why I get realm: command not found. I installed the realm package by sudo apt-get install sssd realmd -y
Hi
Can we try this configuration on cent OS?
i have a question bro !
i preparing for my oscp right now.
can i get a job after oscp. plz answer
thankyou
I would say you should have no problem getting an entry level position after you get your OSCP.
Good luck!
You have nowhere mentioned about starting sssd service. When you start sssd.service then it will check for /etc/krb5.keytab which is not automatically created. So I am sorry to say that the information provided in this video is not satisfactory.
Will this ubuntu machine appear in computers OU in Active Directory? If not, is it posible to do so?
It will
at the end a have the message / PERMISSION DENIED 5PUBLICKEY?PASSWORD° how can i fix that ? thanks
How to add ubuntu client to ubuntu server domain
can confirm pam is kinda painful to fix
0:50 error "E: unable to locate package realm" fully up to date 20.04 ubuntru apt-get update and apt-get upgrade have been run.
Hey, I believe the package name is "realmd" and the command is "realm". Hope that helps. Good luck!
How to join ubuntu server to ubuntu desktop
No homo but can i give you a kiss dawg? This is so good. Its amazing. Im setting up a lab and this is just so cool
Gui not able to login
I'm getting old bro make your text bigger, not cool with squinting for 12:35 :)
alert(1)
lets go Brandon? thx u
First
Congratulations! You'll go down in this video's history 🤣
i love you
test
0:33 haarsträubend