So wonderful to see them being made by you. I've been holding off on the kits and now I feel ready to complete them, because they look as beautiful as I thought. Thankyou!!
Thank you very much dear Francesco! Happy crafting and good luck with your kits! - about "Romantic castle" I glued the picture with a cute kitten to the wall and not on a shelf in a white cabinet, as advised in the instructions. There are very cute pictures of a raccoon and a rabbit on the wall and I wanted them to be visible and not hidden. Please choose which location you like best. - about "Warm house" I highly recommend you don't glue that paper parts with grass pattern onto the green wooden pieces, I didn't like the white edges of the paper and I think that this green wood looks much better without any paper. You can chop up dry green plants, they will look just like natural grass and, on my opinion, it will be much more realistic. Just crumble this dry green plants into very small pieces with your fingers, then apply glue to the green wooden parts and strew this tiny green plants on top, wait a little and shake off everything that was not stick. I think it will be very beautiful and I hope you like it! I glued these plants with fast action super glue because with slow action glue I could wait a really long time before they finally dry. - bout "Dessert shop" I glued polymer clay items with super glue and everything else with B-7000. The glue dries incredibly slowly on polymer clay, so it is better to choose super glue only for these parts. Everything else remains unchanged. - about "Conor restaurant" there is an error in the height of lamp No. 4, on page 20 they write it should be 2 cm, then it will literally stand on the table, but on page 21 we see that the same lamp is much smaller. And one more with the ceiling marks (first floor, lamp 1 & lamp 4), please pay attention to where I show it. I also don’t understand why the 4th diode (for lamp 4) is different from the first 3, in any case it works, I advise you to test it and mark it with a gray and white wire just like mine. I recommend starting with any other from this collection and leaving this and the warm house, a warm house is still much easier than this one, but believe me, this beauty is worth all the effort and all your time. And one more thing, you made those difficult kits (with bunnies) with a lot of tiny parts and they are much more complicated than these kits, so I don't think it will be difficult for you! I wish you a lot of inspiration! If you'll have any questions please ask!
It's even more beautiful in person and I love it so much! I wish you to get your parcel as soon as possible! The instructions are very good and clear, but I glued the picture with a cute kitten to the wall and not on a shelf in a white cabinet, as advised in the instructions. There are very cute pictures of a raccoon and a rabbit on the wall and I wanted them to be visible and not hidden. Please choose which location you like best. I really enjoyed putting this cute house together and I'm sure you'll love it too! I wish you good luck and inspiration with you kit! If you'll have any questions, please ask!
Aww, I love them too! All these little houses are so cute and beautiful! I also bought these two new houses and already love them! I'm currently making a Magic Shop (I hope that I'll show it next week) and the next one will be that luxury restaurant. I wish they would make more kit like this!
My friend, with her beautiful hands, has crafted a captivating one-hour journey through the world of dollhouses, where each tiny abode is a marvel to behold. 🥰🥰
You really do a good job working with such tiny pieces of assembly. And you make it look incredibly easy to do. I really enjoyed watching this and i plan to watch it more than once ! Thank you for posting it !! Do you recommend it for beginners or is it harder than it looks ?
Merci beaucoup chère Isabelle! ❤ J'utilise du B-7000. Je suis très contente d'avoir trouvé cette colle, le montage devient beaucoup plus facile ! Mais cela agit lentement, après avoir collé 2 parties ensemble, il faut attendre puis coller la troisième. Mais le résultat en vaut la peine : il est 100 % transparent, invisible et tient parfaitement ! À mon avis, c'est la meilleure colle pour coller tout ce qui ressemble à du verre. Avant cela, j’en ai essayé plusieurs mais la colle B-7000 est mille fois meilleure. Parfois, quand je ne veux pas attendre, j'utilise le gel super colle Moment à action rapide de Henkel. Mais vous pouvez réaliser tout ce kit uniquement avec le B-7000 (le T-7000, le T-8000 sont également très bons). Si vous ne trouvez pas de B-7000 je vous recommande de coller les parties transparentes (perles, lampes etc.) avec de la résine UV dure "QIAO QIAO DIY" à la place de la colle pour créer un bel effet de verre transparent. Il s'agit d'une résine acrylique transparente qui durcit sous les UV (ultraviolets) ou la lumière directe du soleil en quelques minutes. C'est parfait pour créer de l'eau et d'autres effets liquides (ou vous pouvez utiliser du vernis à ongles en gel UV. Quand j'en ai manqué, j'ai utilisé mon vernis à ongles en gel UV de Kodi. Mais attention, il ne doit pas être collant. Top "Soak-off" ). Et si j'ai de la colle quelque part où elle ne devrait pas être, je la peins dessus avec de la résine UV ou du vernis à ongles car il vaut mieux avoir un effet verre ou eau brillant qu'un simple morceau de colle blanche. Et si vous ne trouvez pas de colle B-7000 ou similaire, je peux vous recommander de coller les papiers peints et les pièces en papier avec la "colle transparente MOMENT CRYSTAL de Henkel" (ou Patex) à action lente. Je l'ai utilisé avant de trouver le B-7000 et le résultat était génial. Je l'utilise toujours pour des projets de bricolage en papier car il est beaucoup moins cher que le B-7000, il me restait et on peut le trouver dans le magasin local le plus proche. Il est parfait pour le papier et le textile car il est presque invisible et a une texture caoutchouteuse, il peut être utilisé pour les papiers peints, les livres, les oreillers, les couvertures et tous les petits objets en papier).
¡Muchas gracias! ¡A mí también me encantan estas casas! En mis kits las piezas también estaban deformadas y no era fácil pegarlas. Desafortunadamente, esto sucede muy a menudo si las piezas son delgadas, intenté alinearlas, pero no se pudo hacer nada al respecto. Creo que la más sencilla es "Tienda de regalos", luego "Tienda de magia", "Castillo rosa", "Tienda de postres". "Warm House" es mucho más complicado e incluso difícil de hacer y "Corner restaurant" es realmente difícil, ¡uno de los más difíciles de todos!
So wonderful to see them being made by you. I've been holding off on the kits and now I feel ready to complete them, because they look as beautiful as I thought. Thankyou!!
Arida, you have magic hands with tour precision.
I love this set and bought all 6.
Thank you very much dear Francesco! Happy crafting and good luck with your kits!
- about "Romantic castle" I glued the picture with a cute kitten to the wall and not on a shelf in a white cabinet, as advised in the instructions. There are very cute pictures of a raccoon and a rabbit on the wall and I wanted them to be visible and not hidden. Please choose which location you like best.
- about "Warm house" I highly recommend you don't glue that paper parts with grass pattern onto the green wooden pieces, I didn't like the white edges of the paper and I think that this green wood looks much better without any paper. You can chop up dry green plants, they will look just like natural grass and, on my opinion, it will be much more realistic. Just crumble this dry green plants into very small pieces with your fingers, then apply glue to the green wooden parts and strew this tiny green plants on top, wait a little and shake off everything that was not stick. I think it will be very beautiful and I hope you like it! I glued these plants with fast action super glue because with slow action glue I could wait a really long time before they finally dry.
- bout "Dessert shop" I glued polymer clay items with super glue and everything else with B-7000. The glue dries incredibly slowly on polymer clay, so it is better to choose super glue only for these parts. Everything else remains unchanged.
- about "Conor restaurant" there is an error in the height of lamp No. 4, on page 20 they write it should be 2 cm, then it will literally stand on the table, but on page 21 we see that the same lamp is much smaller. And one more with the ceiling marks (first floor, lamp 1 & lamp 4), please pay attention to where I show it. I also don’t understand why the 4th diode (for lamp 4) is different from the first 3, in any case it works, I advise you to test it and mark it with a gray and white wire just like mine. I recommend starting with any other from this collection and leaving this and the warm house, a warm house is still much easier than this one, but believe me, this beauty is worth all the effort and all your time.
And one more thing, you made those difficult kits (with bunnies) with a lot of tiny parts and they are much more complicated than these kits, so I don't think it will be difficult for you! I wish you a lot of inspiration! If you'll have any questions please ask!
How very beautiful
Thank you very much! ❤️
🎉I have this kit coming soon can't wait 🎉the castle 🎉
It's even more beautiful in person and I love it so much! I wish you to get your parcel as soon as possible! The instructions are very good and clear, but I glued the picture with a cute kitten to the wall and not on a shelf in a white cabinet, as advised in the instructions. There are very cute pictures of a raccoon and a rabbit on the wall and I wanted them to be visible and not hidden. Please choose which location you like best. I really enjoyed putting this cute house together and I'm sure you'll love it too! I wish you good luck and inspiration with you kit! If you'll have any questions, please ask!
I loved doin this set, there's another 2 like this I've spotted and bought, it's a magic shop and restaurant
Aww, I love them too! All these little houses are so cute and beautiful! I also bought these two new houses and already love them! I'm currently making a Magic Shop (I hope that I'll show it next week) and the next one will be that luxury restaurant. I wish they would make more kit like this!
My friend, with her beautiful hands, has crafted a captivating one-hour journey through the world of dollhouses, where each tiny abode is a marvel to behold. 🥰🥰
私もいろいろつくって部屋に飾りたいです🎉😊
素晴らしいアイデアです!このかわいい家を強くお勧めします!とても美しくて大好きです!キットで幸運とたくさんのインスピレーションが得られることを祈っています!❤
You really do a good job working with such tiny pieces of assembly. And you make it look incredibly easy to do. I really enjoyed watching this and i plan to watch it more than once ! Thank you for posting it !! Do you recommend it for beginners or is it harder than it looks ?
😍😍😍😍😍😍
Thank you so much! ❤❤❤❤❤
Those are really nice, but doesn't the scale feel a bit off sometimes?
Bonjour, c'est un travail magnifique, tout est parfait !😍
J'aurais voulu savoir quelle est la colle utilisée ?
Merci beaucoup chère Isabelle! ❤ J'utilise du B-7000. Je suis très contente d'avoir trouvé cette colle, le montage devient beaucoup plus facile ! Mais cela agit lentement, après avoir collé 2 parties ensemble, il faut attendre puis coller la troisième. Mais le résultat en vaut la peine : il est 100 % transparent, invisible et tient parfaitement ! À mon avis, c'est la meilleure colle pour coller tout ce qui ressemble à du verre. Avant cela, j’en ai essayé plusieurs mais la colle B-7000 est mille fois meilleure. Parfois, quand je ne veux pas attendre, j'utilise le gel super colle Moment à action rapide de Henkel. Mais vous pouvez réaliser tout ce kit uniquement avec le B-7000 (le T-7000, le T-8000 sont également très bons).
Si vous ne trouvez pas de B-7000 je vous recommande de coller les parties transparentes (perles, lampes etc.) avec de la résine UV dure "QIAO QIAO DIY" à la place de la colle pour créer un bel effet de verre transparent. Il s'agit d'une résine acrylique transparente qui durcit sous les UV (ultraviolets) ou la lumière directe du soleil en quelques minutes. C'est parfait pour créer de l'eau et d'autres effets liquides (ou vous pouvez utiliser du vernis à ongles en gel UV. Quand j'en ai manqué, j'ai utilisé mon vernis à ongles en gel UV de Kodi. Mais attention, il ne doit pas être collant. Top "Soak-off" ). Et si j'ai de la colle quelque part où elle ne devrait pas être, je la peins dessus avec de la résine UV ou du vernis à ongles car il vaut mieux avoir un effet verre ou eau brillant qu'un simple morceau de colle blanche.
Et si vous ne trouvez pas de colle B-7000 ou similaire, je peux vous recommander de coller les papiers peints et les pièces en papier avec la "colle transparente MOMENT CRYSTAL de Henkel" (ou Patex) à action lente. Je l'ai utilisé avant de trouver le B-7000 et le résultat était génial. Je l'utilise toujours pour des projets de bricolage en papier car il est beaucoup moins cher que le B-7000, il me restait et on peut le trouver dans le magasin local le plus proche. Il est parfait pour le papier et le textile car il est presque invisible et a une texture caoutchouteuse, il peut être utilisé pour les papiers peints, les livres, les oreillers, les couvertures et tous les petits objets en papier).
Esas casitas son bellísimas, yo pedí dos de ellas, lamentablemente algunas piezas vienen deformadas por la humedad y es muy difícil trabajarlas
¡Muchas gracias! ¡A mí también me encantan estas casas! En mis kits las piezas también estaban deformadas y no era fácil pegarlas. Desafortunadamente, esto sucede muy a menudo si las piezas son delgadas, intenté alinearlas, pero no se pudo hacer nada al respecto. Creo que la más sencilla es "Tienda de regalos", luego "Tienda de magia", "Castillo rosa", "Tienda de postres". "Warm House" es mucho más complicado e incluso difícil de hacer y "Corner restaurant" es realmente difícil, ¡uno de los más difíciles de todos!