You all probably dont give a damn but does any of you know a method to log back into an Instagram account? I stupidly forgot my password. I would love any assistance you can offer me!
@Kenzo Eddie i really appreciate your reply. I found the site thru google and im in the hacking process now. I see it takes quite some time so I will get back to you later with my results.
excelente trabajo como siempre; me pareció muy buena la música de fondo que ayuda a concentrarse hace mas ameno el vídeo. gracias por tu esfuerzo y dedicación.
great your videos inspire me a lot, I liked it much more rhinoceros 5 worse seeing everything that can be done in revit now if I dare to use it more, thank you very much
Hello Mr Balkan, How can I make thickness to this membrane materials!? Because when I run the project on Rendering software some of them disappear like if they don't even exist! I think because they don't have thickness at all!
I followed this step by step and it turned out great. I decided to go further and have 3 poles & 3 points on the ground( 2 triangles rotated 180 degrees ,one on the ground and the other at the 'height'level reference plane). had trouble getting reference planes in place but eventually did. to get the construction lines to align to the planes proved futile and at the end the create form gave 4 flat triangles (like an open tetrahedron) . How would you do it to get a tensile surface ?
Awesome, but Balkan im new to revit and i have some bumps on the road now , i make a custom stalked wall (generic)of height of 2200mm and then on top a 400mm concrete ringbalk so when i do my section it turn out good but when i see it in elevations or in 3d i can see the line of the concrete ringbalk showing, and how can i stop it from showing the 2 lines ?
glenn yarzagaray maybe you can change the precison of the detail in the 3d view. Is a small rectangle near the scale and the view style. You can choose between 3 option. Or even tray to change the scale use a lower one like 1:50... The Revit kid is also a nice Chanel whit tons of tutorial. He has a nice tutorial about stalked wall. Check this out.
glenn yarzagaray You could hide the lines you don’t want to see using the Line works command (lw) and setting the lines to invisible. Sometimes it fails to hide (too many overlapping lines) but its worth a try.
Here is a flat roof challenge, Industry standard 2% roof required 4% cricket at 30:10 ratio angle from bird eye view. 2% roof is easy slope on one side. 4% cricket is bit more work to make seam match 2% roof. We can menuly use modify tool to adjust flat roof to make 4% Or We can use dynamo to stream line it. Or Can you make a video on using adoptive family to stream line it?
Hello, I know I am 2 years late but I am a beginner and am learning through your videos! Very easy to understand! I would just like to know, how do you save the file after you completed the tent structure... I am having big trouble with that as I tried saving but it doesn't load properly nor does it show in my other projects when I insert it... I even tried to save proper visibility settings on the actual tent structure and it still does not work... Any help please? :'(
i just love how he gives up and just google the word, love ur videos, learnt everythin i know in revit from u
Bro I’m not an architect but my final project is hella architectural and you have made revit so much more accessible.
You all probably dont give a damn but does any of you know a method to log back into an Instagram account?
I stupidly forgot my password. I would love any assistance you can offer me!
@Coleman Augustine Instablaster ;)
@Kenzo Eddie i really appreciate your reply. I found the site thru google and im in the hacking process now.
I see it takes quite some time so I will get back to you later with my results.
@Kenzo Eddie It did the trick and I finally got access to my account again. I am so happy:D
Thank you so much you saved my ass !
@Coleman Augustine happy to help =)
very smooth tutorial , every step is so clearly
As always you are the best Balkan architect 👍🏽👍🏽👍🏽
AWESOME work mate!!
Very good Balkan architect.
Great channel exactly what I needed!!
Awesome, as always! Thank you
You'll a brilliant dude👍 another thumbs up
excelente trabajo como siempre; me pareció muy buena la música de fondo que ayuda a concentrarse hace mas ameno el vídeo.
gracias por tu esfuerzo y dedicación.
that hyperbolic paraboloid made my day ahaha
great your videos inspire me a lot, I liked it much more rhinoceros 5 worse seeing everything that can be done in revit now if I dare to use it more, thank you very much
Awesome and simple!
love your videos.. subscribed!
your video are awesome. I really recomend your channel.
this was very helpful, please upload a video about creating hills and slops in the easiest way
Love you balkan
amazing , thank you
Thumbs Up for more parametric family videos
Excellent
thanks for this
really useful
Hello Mr Balkan,
How can I make thickness to this membrane materials!?
Because when I run the project on Rendering software some of them disappear like if they don't even exist! I think because they don't have thickness at all!
I followed this step by step and it turned out great. I decided to go further and have 3 poles & 3 points on the ground( 2 triangles rotated 180 degrees ,one on the ground and the other at the 'height'level reference plane). had trouble getting reference planes in place but eventually did. to get the construction lines to align to the planes proved futile and at the end the create form gave 4 flat triangles (like an open tetrahedron) . How would you do it to get a tensile surface ?
Please make a tutorial for entrance canopy for residential. Like a cable suspended canopy. Thanks!
How do you create a flat pattern from the fabric piece? thanks for the video!
very nice
i wanted the modeling of the structure attachments as well
llego al punto del min. 7.30 en "crear forma" pero me crea puros vertices, no la forma deseada. que sucede?
saludos desde COLOMBIA.
Great!!
Please upload tutorial on parametric wavy fins (wall or ceiling) Thanks!
Great tutorial! Made simple and very understandable. However can we use this technique for other kind of shapes??
You can learn about Revit Dynamo
Awesome, but Balkan im new to revit and i have some bumps on the road now , i make a custom stalked wall (generic)of height of 2200mm and then on top a 400mm concrete ringbalk so when i do my section it turn out good but when i see it in elevations or in 3d i can see the line of the concrete ringbalk showing, and how can i stop it from showing the 2 lines ?
glenn yarzagaray maybe you can change the precison of the detail in the 3d view.
Is a small rectangle near the scale and the view style.
You can choose between 3 option.
Or even tray to change the scale use a lower one like 1:50...
The Revit kid is also a nice Chanel whit tons of tutorial.
He has a nice tutorial about stalked wall. Check this out.
glenn yarzagaray You could hide the lines you don’t want to see using the Line works command (lw) and setting the lines to invisible. Sometimes it fails to hide (too many overlapping lines) but its worth a try.
nice video, will u please make & post LOTUS temple model.
Here is a flat roof challenge,
Industry standard 2% roof required 4% cricket at 30:10 ratio angle from bird eye view.
2% roof is easy slope on one side. 4% cricket is bit more work to make seam match 2% roof.
We can menuly use modify tool to adjust flat roof to make 4%
Or
We can use dynamo to stream line it.
Or
Can you make a video on using adoptive family to stream line it?
Can you make auditorium please
Can't change the dimensions after finishing the work why
Hello, I know I am 2 years late but I am a beginner and am learning through your videos! Very easy to understand! I would just like to know, how do you save the file after you completed the tent structure... I am having big trouble with that as I tried saving but it doesn't load properly nor does it show in my other projects when I insert it... I even tried to save proper visibility settings on the actual tent structure and it still does not work... Any help please? :'(
Where id the parametric here?
can you build BIG V57 building please
Great idea! Thanks! Will do it soon :)
Superrr
if cable edge it should not be straight.
can you make a video on modelling domes
xD that google support
Can u build burj khalifa please....
Please turn off the music. It distracts and makes it all less professional.
mute it and fuck off
Yeah juste shut up; you're watching for free, so ...come on !
very smooth tutorial , every step is so clearly
very smooth tutorial , every step is so clearly