I had a 97 extended cab 4.3 automatic that had that same color scheme. It had factory bucket seats with a factory center console with a floor shifter. Only one I've seen like it.
What kind of tyranny is behind that?? Looking to slap one of these in my 76 camaro I have a rebuilt th350 with a shift kit its not even a year old would it handle this beast? I don't romp on my car a lot but its a daily in the summer
I have that same motor in my 70 elcamino same headers but I bought the long block and put a fi-tect carb did you change any thing in the motor and what mufflers
Any one come up with any magical answers? I'm putting together a 94 Sonoma ext cab 2 w/d, 398 small block has Brodix spread port heads and so far it looks like i'm going with Headman Hustler 2" primary fenderwell then the battle begins
Yes this is a 454 small block from Blueprint Engines...they are Headman headers we ordered from Summit...look up Bud Pate Motorsports on RUclips he has built all my S10’s on my channel...he’s always glad to help and a great guy he’ll have the part # for you
@@TheSlowride81 if its the same motor its advertised as 563/545. your dyno shows 580/572. just wondering if its the same motor and if it is why your power is higher than what they say. was that flywheel or wheel?
I’m not sure exactly why it’s different..lots of variables come into play when they Dyno a engine at their facility…I think they probably state a lower hp rating when selling so the customer doesn’t get upset if it’s lower than advertised….GREAT engine I’ll never build another I’ll always buy their crate motor.
@@wyattsrepairs8860 Blue print makes a 454 cubic inch small block. Just like how you can do a LS 454 a small block can be made with lots of cubic inches as well 383, 396, 406 etc etc not just a 350.
Really should get a shroud for the radiator. Fans tend to bend and rub holes in tubes. Sounds awesome . blueprint builds a nice engine.
Backyard-Built-Trucks Thanks
Nice install, you're going to love that motor. Running the same one in my IROC Z28 and it's a beast!
Thanks...…..track opens this weekend I hope it gets down the track as good as yours
No words ! Just great job and look amazing
Nice clean simple build😎
Bullitt County Kentucky... I’m from Mt.Washington how have I never seen this truck?!
I’m in Mt Washington....it’s left the streets and full race now..you can see it at the Valley or Beech Bend this season
SBC Greatest engine ever!
But...bbc no?
Sweet truck!
Eric Glieden Thanks
that big block would sit pretty in my lil nissan
Nice. I have a couple questions if you don’t mind. Did you have to do a lot to get those headers to fit? Are they hedman’s?
Yes they are Headmans...no work to make them fit
@@TheSlowride81 thanks.
Wow that is one sweet ride hope mine sounds that good when I'm done with it
Thanks, I'm sure yours will sound great when its done
Is this the camshaft that comes in it from blueprint or did you change it? Sounds great
It comes complete….I have a unboxing video on here…it comes complete from carb to oil pan
@@TheSlowride81 it sounds great. Does it run cool on the street? Hows it's street manners?
@@cannonballmodelshop2240 It's Perfect no issues at all
I had a 97 extended cab 4.3 automatic that had that same color scheme. It had factory bucket seats with a factory center console with a floor shifter. Only one I've seen like it.
my buddy had one and yeah they're kinda rare..
What kind of tyranny is behind that?? Looking to slap one of these in my 76 camaro I have a rebuilt th350 with a shift kit its not even a year old would it handle this beast? I don't romp on my car a lot but its a daily in the summer
I live in Shepherdsville I would love to see this .
I have that same motor in my 70 elcamino same headers but I bought the long block and put a fi-tect carb did you change any thing in the motor and what mufflers
We took from the crate and installed it didn't do anything to the motor. We run Flowmaster Super 44 Mufflers .....Motor has preformed excellent!
Wow Nice truck
Budget Build speed Thanks
Love to know what header setup you are running? And steering shaft setup. I’m in the process of assembling a 496 and that’s my biggest fear.
Me too, I dont really want to cut on the frame if I dont have to. I was told over the frame headers but I cant find any they are talking about
@@MrBdmfps9 wouldn’t a 496 be a big block though? This is a small block so it is probably easier to find headers
@@brendanschriber3242 correct but some manufacturers make for small and big blocks
Any one come up with any magical answers? I'm putting together a 94 Sonoma ext cab 2 w/d, 398 small block has Brodix spread port heads and so far it looks like i'm going with Headman Hustler 2" primary fenderwell then the battle begins
Yes this is a 454 small block from Blueprint Engines...they are Headman headers we ordered from Summit...look up Bud Pate Motorsports on RUclips he has built all my S10’s on my channel...he’s always glad to help and a great guy he’ll have the part # for you
I’m a little late but very very nice set up.I have a couple of questions about the Engine and your set up is there anyway I can give you a call?
He clearly abandoned the page unfortunately
Did you have to clearance the fire wall for the swap
Nice truck, where did you find speedometer back ground
It’s fake carbon contact paper
It comes cut and stick
@@TheSlowride81 cool its look good man
This for Sale ?!
So that's the blue print 454sbc crate motor?
Yes
@@TheSlowride81 thats the motor i ordered. what do you think made so much more hp and especially so much more tq?
They built it that way? I don’t understand your question
@@TheSlowride81 if its the same motor its advertised as 563/545. your dyno shows 580/572. just wondering if its the same motor and if it is why your power is higher than what they say. was that flywheel or wheel?
I’m not sure exactly why it’s different..lots of variables come into play when they Dyno a engine at their facility…I think they probably state a lower hp rating when selling so the customer doesn’t get upset if it’s lower than advertised….GREAT engine I’ll never build another I’ll always buy their crate motor.
What alternator bracket is on it
March Billet Alternator bracket for Electric water pump
What did it run at the track? I’m looking to buy one myself
7.05 ET
97.91 MPH
Several videos on here of it making passes at the track
Street outlaws inspired you ha I like the truck was my favorite on the show
Small block 454.....454hp
Motor mounts
Headers are too small, and it needs exhaust pipes.
@ Did I stutter?
@@michaelangelo8001 ; What size primaries are your headers?
@@waynetessier3058 2" on my 415. A 454 would be happier with 2-1/8.
454 small block hmm 🧐
Yup
@@high_on_nightmares thanks
454 is not a small block and I can tell that your s10 has a small block probably a 350 by the sound of it
@@wyattsrepairs8860 Blue print makes a 454 cubic inch small block. Just like how you can do a LS 454 a small block can be made with lots of cubic inches as well 383, 396, 406 etc etc not just a 350.
@merica muscle I didn’t realize someone would be something like that kinda stupid in my opinion