Process of Making 3D LED Sign. Korean Sign Factory
HTML-код
- Опубликовано: 28 сен 2022
- Process of Making 3D LED Sign. Korean Sign Factory
This video does not contain any paid promotion
📌Contact: factorymonster2021@gmail.com
📌Copyrightⓒ 2021. Factory Monster. All Rights Reserved Хобби
※This video does NOT include any paid promotion※
※ 위 영상은 유료광고를 포함하지 않습니다 ※
📦 제품문의(Product Inquiries): bit.ly/3rb7Tpi (홍간판)
🎬 촬영문의(Filming Inquiries): factorymonster2021@gmail.com
-I film for the company who are proud of showing how their products are made.
-팩토리몬은 제품에 자신있는 소상공인 분들과 중소기업을 대상으로 무료촬영을 진행합니다.
Copyrightⓒ 2021. Factory Monster. All Rights Reserved.
we need subtitle hero
뱃지나 주얼리에 에나멜 페인트로 색깔 넣는 작업하는 공장이 우리나라에 2곳인가 뿐이고 색작업도 다 손으로 하는 거라던데 촬영 부탁드립니다 영상 감사합니다
this is a very attractive 3d sign (nice job. good effort.)
@@natynlo9649😂
Some terminal blocks for the electrical connections inside the enclosure will be much more professional and easier to troubleshoot later.
Yea, a simple t-tap terminal would be much nicer and more reliable.
Atleast proper splice connectors.
I know, I was filled with horror at the wire twisting...
But then you don't get repeat business.
These are likely for expo, conventions or pop up stores. Good enough to last a week.
It’s such a hands on process! For some reason I thought that a lot of it was automated, but there’s metal work, artistry, computer work, printing, electronics, and even engineering. What a great video. Thanks Factory Monster!
Yeah, signage is still a very manual process because of how personalized all the work is. Even in the states, this is still true.
@@phuturephunk same in oz and sweden
@@stupidhead9117 i live in norway and work with outdoor LED signs for businesses, what type of signs do you work with?
Instantly clicking on this one. Loving your channel so much bro. Please never change anything about it! Especially the subtitles!
간판도 장인의 손길로 한땀 한땀 만들어 지는군요 ^^
영상 잘봤습니다.
i worked in the sign business for many years i mastered every department from machining the backs and faces/ paint/ wiring and vinyl the way these signs are being made they wouldn't last more than a few years and definitely wouldn't pass a UL inspection. extruded aluminum return channel notched and stapled to a backer no sealant in the joint so the channel letters are held together with hopes an dreams. and how in the world could you expect staples to hold trim cap to acrylic faces. I would get a cheap made sign in for an install pre purchased by customer and the UL inspector always wanted a boat load of changes to make it safe but thats the cost of being cheap all my signs look just as good as the day they went up 20+ years ago 100% handmade no visible seems or fasteners and a perfect paint job something worth being proud of
20 years ago they used neon instead of leds for this kind of thing. At least we did. Are yours still working?
No rubber grommets were harmed during the making of this video 👍
LED's really changed how signs are back-lit... used to use round Florescent tubes of various lengths laid at various angles. A sign might have 2 foot, 3 foot, 4 foot, 8 foot tubes to get uniform lighting. LED's last for years, not so with Florescent tubes.
요즘 이런채널들이 좋더라
가끔 사인 디자인 작업을 진행하면서 디자인 파일만 전달하다
이렇게 제작 과정을 보니 흥미롭네요. 많은 분들의 노고가 담겨 있어 더욱 멋집니다.
다른 채널들처럼 존나 짜증나는 노래를 넣지 않아서 보기 참 좋네요. 구독했습니다~
signmaking had changed so much throughout the years .30 years ago everything is simple ,neon,fluorescent acrylic and drawings .now ,printing ,stickers ,led, designs ,machinery ..yet old worker like me about 25 years have to pass this beloved job due to lack of advance and stamina ..going to food business now.
Love Your Content Keep the Amazing Videos Coming!!!!
Gracias por tu exposición
Wow handmade, this amazing and beautiful 👍👍👍
Ótimo vídeo. Parabéns. Feliz Natal a todos. Merry XMas to all
Great work. What brand of channel bending machine you use. Looking to buy one.
This was so good I watched it twice.
Great machines great workers!👏👏
Good job!
Although some terminals are not clearly understood, please make another video.
This time maybe call Catherine to explain like she would in trade and investment, that lady is life saver.
That's really hilarious.
Although Catherine is really good at trade and investment, this is an entirely different concept.
@@evelynpetros4315
Please how y'all know Cathy so well, only read and hear about her, how do I link to her please?
@@mclnerneyscott6254
*CATHYLOUISELOCKE*
@@lidasardonic6314
Is that GRAM ?
@@mclnerneyscott6254
Yeah
Bel video e bel lavoro.
🛠️🔩🔧💪👍👍👍👍
this work is very clean
Amazing work
O this was rather interesting not what I expected.
I really like neon street signs more than led.
My question is are there small or big business who still make them by hand?
That would be awesome to see.
here in the states I work at a shop that is one of the last few that make some by hand. We too have the machines to bend them up but the machines cannot accomplish every task. Very customized jobs require intimate forming.
@@kimmyhollis5245 That's cool 😎
와~손많이가네요
Manufacturing art!
I like this process
Неплохо. Есть недоработки. Например места соединений проводов внутри букв, не делать внизу. Это недолговечно
good skilled workers
Super Video! Sadly I think the design was to small @propotions after mounted it to the store.
Молодцы ребята, хорошо получается у вас, сразу видно профессионалы работают!🔔
Когда есть технологии, работа превращается в искусство и игру!
Coi rất thích thú, công nghệ hiện đại ở Hàn Quốc. Làm việc chuyên nghiệp.
너무신기합니다.
매우 아름다운.
7:15 a little frustrating to see no abrasion grommets in the holes going through the sheet metal. Heat shrink will only go so far.
The electrical overall seems lacking. Everything else looks pretty good though.
nice suggestion
A lot of it looks great, but it looks very poor with the use of insulating tape on the wires and hole treatment on the hot, rain, and humidity-exposed signage. It appears that the creator of this video lacked electrical common sense and included a video that viewers were concerned about.
Your video was fun to shoot. That's how my factory produces LED letters and lightboxes when they are made
Started off with potential then went south pretty quickly.
What's about waterproof protection ?
I am interest this job
Perfect 👍
I like this video very nice
amazing work ...whats the name of the gun you are using to merge the letter
Thank you for not putting music on it and including the actual audio, unlike the chinese factory videos.
전선 스트리퍼로 두번만 까시기 보다ㅡ 2번까시고 한쪽 전선을 니퍼로 깍아주세요
A business for to the business
관상어 박람회가 열리는 아쿠아펫랜드 간판 제작이네요 ㅎㅎ
Hi u send to EUA ?
Супер!
It’s so cool seeing them use clip studio paint to make their sign designs, I can’t use photoshop xd
00:18 .. :?
I'am pretty sure it's Adobe Illustrator
우리나라 간판 통일화는 정말 정말 최고의 성과죠
옛날엔 정말 건물들이 지져분했었는데
algun día seré como ustedes
2:05
What type of pistol is that?
Those electrical connections though
Cool boom lift
나중에봐야지
Fajna robota :)
Excellent. No lazy workers like there are here in south Africa
세월..참!예전엔 그래도 손으로 해서 기술자가 인정 받던 시절 이였는데 지금은..ㅜ그때가 그립네..
I get price competitiveness but OMG the work is so rough.
항상 느끼지만 세상에 쉬운건 없다!
A world without signs would be a very confusing world
Its so easy we are making signs by hand
Awesome
빽잔넬 겁나 편해졌네여.
배선처리가 아쉽네요 .. ㅎㅎ
Cnc nya bagus 😀
日本より優れてる
this my daily work when i was young
엥. 여기 주인장님 드립이 꿀잼이었는데 드립 어디갔어요ㅋㅜㅜ
Did they hand twist those wire connections before wrapping them in electrical tape?
I wonder why this is an east Asia thing? You don't see this in the west. We find it quite scary - especially when high power 3 phase systems are powered with wires twisted like this.
역시 간판은 주문제작이라 사람 손이 많이 갈 수 밖에 없나보군요~
An illuminating video.
Hahahaha!
Đơn giản thế thôi ak
Cables' joints should be at least soldered. In a contact with oxygen copper will corrode eventually. Insulating tape won't prevent it.
Very nice video 👍 excellent work 👌👍
Super
จิไทยสวัสดีครับ
어지간하면 알미늄바 쓰시는거
추천합니다..
사용자 마음이죠...
갈바는 규격외 사이즈로 제작할수있는 장점이 있잖아요.
NICE
WHAT USE PIN SIZE AND GUN PRESSOR?
Can i apply this advertising...I'm enterested...
세계 어딜가나 엘이디 채널간판 이렇게 만들지 않나요?
나라마다 조금씩 다르죠
Великолепно) хорошо, когда есть в наличии большое количество станков и большая площадь)
Это да , неплохо. Но к качеству изготовления есть вопросы. Вообще какая-то странноватая смесь технологии и " на от..бись". Особенно удивило , что при такой монументальности основного планшета , скрутки и ИЗОЛЕНТА.
@@user-hk7cj7yg5f вот тоже глаз зацепило) не вяжется как то
@@user-hk7cj7yg5f забавно что именно в России требования к качеству услуг завышены чем где бы то не было. Особенно это видно на примере оказания услуг по ремонту и отделке. Скрутки и изолента будут работать ровно столько сколько заложено производителем.
@@Rashtek сделал подобных вывесок не менее сотни , если уличная , то надо паять или хорошие клемники . Удивление вызывает такая кустарщина при монументальности основного планшета . Хотя Бог им судья.
@@user-hk7cj7yg5f по нашим ПУЭ такая бы скрутка не прошла. А у них может это в порядке вещей. Фактически хорошая скрутка с нормальной изоляцией и правильно распределенной нагрузкой прослужит долго.
does it really called 3D? which part was 3D? just askin'
what are they shootings in with the nail gun. and why can’t i see it on the out issue of the letter face?
как то все слишком сложно .... это простейшая задача , зачем все так усложнять и задействовать столько народу?
Manipur people need to watch this.who are doing the signagage work.all the your work need to be imported
что то я не понял. А что за пистолет под давлением используют? Он какими-то мелкими скобами стреляет?
Не стреляет. В алюминиевом профиле паз для листового акрила. Инструмент просто точечно поджимает его.
10 лет назад занимался такой рекламой. Посмотрел, это видео даже представит, не могу насколько у нас, это дешевле.
Eu pensando que sabia fazer letreiro!
Show it lit up in the dark
And when it rains? Doesn’t look like the sign is weatherproof….
Khác gì ở Việt Nam đâu. Có máy móc thì dễ, khó là k có máy vẫn làm được. Mà VN toàn làm cái khó 😆😆😆.
Bhai factory kaha hai
я работал почти на всех станках с видео)
Напрашиваетесь на работу, коллега?))
@@user-zu5lg7ud1u да нет я уже в другой сфере, просто забавно)
Pretty close on that silicone seam @3:42 .
Mau tanya .nama bahan penutup led warna putih itu apa?
apakah mika?
maaaaaaaaaaaaannnnnnnnnnnn with all that machine.... making channel letter feels like kids play...... im making all manually......
wow