I just fixed a 212 doodlebug for my neighbor. I installed a 212 in my sons mbx10. I thought my sons was a bit of a handful until I test rode my neighbors. That one is geared a little lower plus the overall size and riding position is different so it’s real snappy and wheelie happy. My sons MBX10 the way I have it geared will do wheelies on command but let’s you have more of a controlled launch and tops out at 41MPH with me on it (220#), my son is 77# but he’s too scared to keep it pinned to top out. LOL. One note though, it is worth swapping the clutch and rear sprocket for a 40/41 chain and run a 420 chain on it. It handles the torque better with a lot less stretch so it’ll last longer. I also made my own header that accepts a screw on muffler. I made it from scrap bicycle handle bars, turned out pretty sweet.
Is it normal for the chain to scrap the clutch like that? I bought a monster Moto 80 and switched out the engine to a 212 predator of course got a new clutch but mine does scrape like how your did.
I built this exact same thing, and mine only goes 28 mph top speed. I’m very confused why this is because yours goes much faster, and everything is exactly the same between mine and yours. The only difference that I can notice is that I have an upgraded air filter, and my clutch is not on backwards like you have yours. I’m planning on getting a smaller back sprocket to try to get a higher top speed. Does anyone know why his goes so much faster than mine?
try removing the international governor very simply plenty of videos and adjusting the external governor also try a 100-80 dollar torque converter if you wanna go a lot faster more torque more speed they have a carb and exhaust kit you can buy that will also make the predator 212 go faster this kit will run you 100 bucks comes with carb , air intake with a dust cover , exhaust, breathers , jets , ect wanna go even faster fix the gearing on the back wheel try a 70 sprocket and more teeth on the clutch
I have put 212's in both frames, there is definitely more room in the DB30. No trimming anything to get proper fitment. I had to trim a small bit of plastic from the stock airbox to get the 212 to fit the 80cc monster moto frame. No riser plates or anything weird on either frame. The engine fits on both stock mount plates.
Ay what kind of brakes caliper do you have cause I have the mini bike with 212 but the stock brakes are trash I was wondering if you have the hydraulic brakes
The 420 motor will fit on it but it will take some modifications of the frame to allow it to fit. If you're looking for some more horsepower I would recommend for going to the 212 and then buying a stage 1 or stage 2 kit so that you can get the same if not more horsepower from a smaller motor that will fit easier
Can't remember the clutch but just look up the size of the output shaft. I just grabbed some size 35 chain from a tractor supply store and cut it to size with an angle grinder
Liked and subbed! My dirtbug has gone an 8.60@78+ in the 1/8 still on the stock wheelbase. I have a video on my channel, check it out if you get time. Thanks
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
I just fixed a 212 doodlebug for my neighbor. I installed a 212 in my sons mbx10. I thought my sons was a bit of a handful until I test rode my neighbors. That one is geared a little lower plus the overall size and riding position is different so it’s real snappy and wheelie happy. My sons MBX10 the way I have it geared will do wheelies on command but let’s you have more of a controlled launch and tops out at 41MPH with me on it (220#), my son is 77# but he’s too scared to keep it pinned to top out. LOL. One note though, it is worth swapping the clutch and rear sprocket for a 40/41 chain and run a 420 chain on it. It handles the torque better with a lot less stretch so it’ll last longer. I also made my own header that accepts a screw on muffler. I made it from scrap bicycle handle bars, turned out pretty sweet.
what size clutch and sprocket
@@Scriph I’ll get back to you on that, I can’t remember for sure. I’ll check tomorrow.
@@deegan727 ok thank you
@@deegan727 did tommorow come yet??
I have a high reving built 212cc on mine it 55mph scary fast lil bike no lie
What motor dis u use
Chase Prichard predator 212cc probably
@@ultimatemonk4162 yeah 212 predator with billet rod /flywheel 265 cam with head ported polished milled down 40thou
@@boostedmk5gti563 I run a stock 212 with a header a torque converter and 30 tooth rear sprocket and run 54mph
Hey man just wanted to say thanks 😂 apparently 76% percent of veiws from my doodle bug video are because they came from watching your video
That laugh after the wheelie😂
I know this is a year old but how did you bend that bar back
Is it normal for the chain to scrap the clutch like that? I bought a monster Moto 80 and switched out the engine to a 212 predator of course got a new clutch but mine does scrape like how your did.
How did you do the swap? Was this a direct bolt in swap or? Provide a list of required modifications and such, I’d love to do this with mine
Change the sprocket to a smaller size to get rid of the jump action
How did you bend that bar back? So the motor can fit. I don’t want to cut it off
I have a dirt bug do you think i can put a 212 in it
I bought this bike off this dude
She a legend mini
I built this exact same thing, and mine only goes 28 mph top speed. I’m very confused why this is because yours goes much faster, and everything is exactly the same between mine and yours. The only difference that I can notice is that I have an upgraded air filter, and my clutch is not on backwards like you have yours. I’m planning on getting a smaller back sprocket to try to get a higher top speed. Does anyone know why his goes so much faster than mine?
what about your governor is it still on?
try removing the international governor very simply plenty of videos and adjusting the external governor also try a 100-80 dollar torque converter if you wanna go a lot faster more torque more speed they have a carb and exhaust kit you can buy that will also make the predator 212 go faster this kit will run you 100 bucks comes with carb , air intake with a dust cover , exhaust, breathers , jets , ect wanna go even faster fix the gearing on the back wheel try a 70 sprocket and more teeth on the clutch
😂awsome
Now go stage 1 with a torque converter
I have one of these it’s so fun but I’m having chain problems so I can’t ride it
Looks easier to swap on those vs the monster moto
I have put 212's in both frames, there is definitely more room in the DB30. No trimming anything to get proper fitment. I had to trim a small bit of plastic from the stock airbox to get the 212 to fit the 80cc monster moto frame. No riser plates or anything weird on either frame. The engine fits on both stock mount plates.
Ay what kind of brakes caliper do you have cause I have the mini bike with 212 but the stock brakes are trash I was wondering if you have the hydraulic brakes
Nope. Stock brakes. They suck
You can legit order all new parts from doodle bug or baha motorsports
Clint Westwood *baja
What the website called
nice shirt
He was flying literally
I’ll buy your doodle bug haha
What size sprocket
Add q stage one performance kit from go power sports
What size motor i have the same one
hows the pickup on that baby!? does it go hard at green lights?
Sorry but that is not a doodle bug that is a Coleman cc100x but nice bike tho
How did you bend the bar behind the motor back
I heated up the welds and then hit it backwards with a hammer
I can't wait to do this swap ! Will the larger 8hp Predator engine fit inside the chassis ?
The 420 motor will fit on it but it will take some modifications of the frame to allow it to fit. If you're looking for some more horsepower I would recommend for going to the 212 and then buying a stage 1 or stage 2 kit so that you can get the same if not more horsepower from a smaller motor that will fit easier
Get a 301
Bruh on a flat road I can get the stock bike to go 35 mph with two people on it
I have the same mini bike but I want a bigger 212 enigine
301 or 420
Depends on your experience with the bike you can make a 212 25 hp but dont recommend with no littel to no experience
I had stage 2 on a doodle bug my dads 350 plus pounds and he clocked 40
First thing I suggest is spending 100 $ on bullit conecting rod yes a little steep but it last and you will never have to worry about it
Yeah I did the same thing
Did you need to replace the rear sprocket for the swap?
Nope
Did you use ur old chain from the 97cc?
@@jeremiahstewart3378 nope. Bought size 35 chain from a parts store and used an angle grinder to gut it to size. The old chain wasn't long enough
my bike accelerate fast but as i drive it slows down and goes slow i have the predator engine on a 100cc coleman mini bike dose anyone know why?
Governor
Add stage performance kit
Link to this engine and clutch?
Engine is from harbor freight. You can get it for like $100 new if you get a coupon. Cant remember the clutch
3/4 clutch
I have the same bike u have but a little different
What size the clutch and chain I just got a 212 and have the same mini bike
Can't remember the clutch but just look up the size of the output shaft. I just grabbed some size 35 chain from a tractor supply store and cut it to size with an angle grinder
I have a fiddle bug as you can tell by my profile
doodoobug
You look waaay to big for that bike... Lol
Liked and subbed! My dirtbug has gone an 8.60@78+ in the 1/8 still on the stock wheelbase. I have a video on my channel, check it out if you get time. Thanks
Go power sports has that peg under 10 bucks
"powerboats" ha
@@MOE13576 hahaha I missed that lol thats some funny shit
@@edgualdino628 hahaha yup
hey hit this comment back if you ever wanna colab
My goes 20mph
I've put a new engine in my and ontop of that a turbo to so it goes 70km
Smaller rear sprocket will raise top speed and lower how much it wants to wheelie I'm going to get one for my doodlebug
@@edwinwx260 you'll get less torque but in this case it doesn't matter
Get a 54 tooth you'll do dam near 50 if not more it'll help keep the front wheel down on take off
Governor zip tie n go
If you want to go faster put a straight pipe on it
You're very odd.