Nos quedamos con el Vermeer, se come troncos de 20x24in de gruesos( bandit solo 20x20), tiene más cosas de seguridad, más grande motor(172hp) aun estando debajo de las 10,000 lb ( bandit debajo de las 10000 sólo puede tener motor de 140hp) y nos pareció más compacto. Pero también tiene sus malas el Vermeer. Tal vez más adelante deberíamos hacer un review de la máquina?
At times, just during the process but the track marks are always easy to erase. This machine is awesome though. Fits everywhere and reaches to and through some really tough spots but Tbh I haven’t used the one you have.
Nice. The giant is 48wide so your mini is definitely nice in that regard. It's been so wet this year we need to use plywood to driveon in high traffic areas. The only machine that doesn't leave a mark is a pair of boots. Lol. Which one did you end up going with and how do you like it so far. Gas or diesel which did you prefer
Very painful to watch, with the skid steer operator Not understanding the purpose for the clamp to turn at a 45 degree angle...The problem he was having, he kept running over the branches, and it would stop his movement, slowing down the whole process.
@@thetreebrotherstreeservice1654 Gotta get the hang of it sucks the grapple cant spin 360 but if you're dragging a long piece backwards you can turn and then go fwd to feed it in if it doesn't go in you can get another bite on it further from the machine and repeat works well
Yes, it is a nice machine. It had 140hp and was keeping up pretty well with The vermeer with 172hp although we decided to go with the vermeer because it had bigger feed capacity, more safety features and it was ready to buy right away and for the bandit we will need to wait 3 months Thanks for watching
I ran an 1800 with the 175hp Deere diesel . It had no problem filling an 8x16ft box with 6ft high sides. It ate anything we fed it and was looking for more.
А так же тупость, что 4-ро стоят и ждут пока один рукожопый еблан на уебанском мини бульдозереке притащит им ветки... Они тупые!!! Руками быстрее бы всë притащили бы... И трактору явно нехватает противовеса и чтоб "рука" Крутилась..
That guy driving the loader ,if he drives a car that way,be a good idea to stay off the highway, when he's around😂😂😮
Bandit hands down
What is safety bar “sensibility”?
It seems like the bandit chipper was easier to feed
In deed, infeed table was lower than vermeer
Con cual de los 2 chippers se queda ? y porque ?
Nos quedamos con el Vermeer, se come troncos de 20x24in de gruesos( bandit solo 20x20), tiene más cosas de seguridad, más grande motor(172hp) aun estando debajo de las 10,000 lb ( bandit debajo de las 10000 sólo puede tener motor de 140hp) y nos pareció más compacto.
Pero también tiene sus malas el Vermeer. Tal vez más adelante deberíamos hacer un review de la máquina?
@@thetreebrotherstreeservice1654 si esa sería un buen vídeo , pros y contras de lo que ustedes piensan acerca del chipper
@@treeing4012 ya Dijo amigazo. Más adelante con gusto
Bandit es mucho mejor. Con el tiempo lo veras.
Wood chippers” like eating my greens and wood
Quicker to load that by hand with the amount of crew
i guess Im kinda off topic but does anyone know a good site to stream new movies online?
@Bobby Jorge flixportal =)
@Isaac Baylor thanks, signed up and it seems like they got a lot of movies there :D Appreciate it!
@Bobby Jorge Glad I could help :D
Talk about lawn damage with that mini.
At times, just during the process but the track marks are always easy to erase. This machine is awesome though. Fits everywhere and reaches to and through some really tough spots but Tbh I haven’t used the one you have.
Nice. The giant is 48wide so your mini is definitely nice in that regard. It's been so wet this year we need to use plywood to driveon in high traffic areas. The only machine that doesn't leave a mark is a pair of boots. Lol. Which one did you end up going with and how do you like it so far. Gas or diesel which did you prefer
To be honest I'd love a miniskid for work in the woods. The giant doesn't have much pull and push power being wheeled
AND !! GROUND !! DAMAGE !! TOO !!
Avant loader the way to go
price of this machine in pakistan
Two goats
Very painful to watch, with the skid steer operator Not understanding the purpose for the clamp to turn at a 45 degree angle...The problem he was having, he kept running over the branches, and it would stop his movement, slowing down the whole process.
for feeding just leave it float with pin unlocked
Tried it and it didn’t work( it was even slower)but thanks
@@Wolfmann99 I will try it. Thanks for the advice
@@thetreebrotherstreeservice1654 Gotta get the hang of it sucks the grapple cant spin 360 but if you're dragging a long piece backwards you can turn and then go fwd to feed it in if it doesn't go in you can get another bite on it further from the machine and repeat works well
@@Wolfmann99 thanks bro. Good advice. Idk why i didn’t think about it... I’m sure it will work pretty good
I liked the bandit better seamed to feed better
Yes, it is a nice machine. It had 140hp and was keeping up pretty well with The vermeer with 172hp although we decided to go with the vermeer because it had bigger feed capacity, more safety features and it was ready to buy right away and for the bandit we will need to wait 3 months
Thanks for watching
Dode consigo lasmakina
It seems to be a waste of good fire wood to me. Maybe i am wrong. But to just chip such big logs. I don't understand it❤Ruth
how much for this machine,
the chipper is around $48,000
@@N3ttwerk not even close anymore
I can't stand the vertical rollers and the red bar on the vermeer.
Precio del equipo
Vermeer bc1800xl con winch y 170hp diésel poco mas de 90k
Bandit 18xl con winch y 140hp diésel poco más de 80k
Needs a swivel
Погрузчик какой то не серьёзный, лёгкий, маломощный и неудобный для такой работы. А оператор на нём как будто первый раз за руль сел, суеты много.
That skid steer/operator pretty useless!
Half the Vermeer chips wouldnt reach the bin on the truck
Lol
Fills up our 12ftx6.5ft pretty good so far
I ran an 1800 with the 175hp Deere diesel . It had no problem filling an 8x16ft box with 6ft high sides. It ate anything we fed it and was looking for more.
Useless machine to load with. get a proper timber grab or a 360 deg. excavator with a grab on
Los conozco cómo lo s mejores equipos.
Беспросветная глупость !!! Эта работа заняла бы в 3 раза меньше времени при использовании бензопилы
А так же тупость, что 4-ро стоят и ждут пока один рукожопый еблан на уебанском мини бульдозереке притащит им ветки... Они тупые!!! Руками быстрее бы всë притащили бы... И трактору явно нехватает противовеса и чтоб "рука" Крутилась..
Как говорил Задорнов " ну тупые"
E