did you have any Trube with your battery going dead after you installed the air compressors with truck running when you shut it off the battery dead. I got the 150 alt
Yes I would buy the kit again. With the 7 gallon tank it took awhile for the one compressor to fill it up. It fills up a lot faster with 2. I added a schrader valve to add air with my house compressor to help with fill ups after draining the condensation out of the tank
@@Chickeneyegarage thanks for posting videos. I know it takes a lot longer getting things done while videoing. I get into a project and nothing gets in my way once I start. LOL. Thanks again.
Hi how do you like the 444C Compressors so far? I have the 380's but there getting old and i want to upgrade. Thank you. I also ordered the EWCS 6 Gauge power wire from AMAZON.
So far they work great. It’s been over a year since I’ve done this setup and I’ve had no issues. I think you’ll like the power wire, very high quality.
Clean setup. Question...could the compressor feet brackets fit against the frame rail instead? Turn the compressors on their sides? Or are the bracket mounting holes further apart than the cross member is tall? I've got a '69 with that 444C kit installed in the bed and want to hide it underneath instead.
Beautiful work brotha. You have so much pride on your work. I love the cleanliness amd your OCD. You inspired me to get to work on my project
Thanks for the kind words. Glad you enjoyed the video.
Looks Great, I like how you ran all your wires nice and neat..Good Luck with everything
Thanks
Nice clean install. Thanks for sharing that. Great job!
Thanks
That's a clean install 👌
Thanks
Looking bud! 👍
did you have any Trube with your battery going dead after you installed the air compressors with truck running when you shut it off the battery dead. I got the 150 alt
@@timdonaldson8018 no issues
I keep blowing a fuze when i try switch on my compressors what do you think could be the solution
What size fuse are you using?
So, with all the add ons to this system from EZAir, was the kit worth it? And is having the 2 compressors faster than the 1st original?
Yes I would buy the kit again. With the 7 gallon tank it took awhile for the one compressor to fill it up. It fills up a lot faster with 2. I added a schrader valve to add air with my house compressor to help with fill ups after draining the condensation out of the tank
@@Chickeneyegarage thanks for posting videos. I know it takes a lot longer getting things done while videoing. I get into a project and nothing gets in my way once I start. LOL. Thanks again.
Hi how do you like the 444C Compressors so far? I have the 380's but there getting old and i want to upgrade. Thank you. I also ordered the EWCS 6 Gauge power wire from AMAZON.
So far they work great. It’s been over a year since I’ve done this setup and I’ve had no issues. I think you’ll like the power wire, very high quality.
@@Chickeneyegarage cool thank you very much..
@@Chickeneyegarage
Over a year and no issues?? That's great!!
Where did u wire up your switch to turn the compressors.
One wire goes to the relay and the other wire goes to the fuse panel
Clean setup. Question...could the compressor feet brackets fit against the frame rail instead? Turn the compressors on their sides? Or are the bracket mounting holes further apart than the cross member is tall?
I've got a '69 with that 444C kit installed in the bed and want to hide it underneath instead.
I think they’ll fit but Viair recommends the compressors be mounted facing up.
@@Chickeneyegarage Ah! I haven't read the manual for the system. Just bought the truck. Beautiful ride you got man 👍🏻
Charlies, great job, clean, Q: On the tower , the two small wires black and white , what are they?
Thanks. The white wire goes to the pressure switch and the black wire grounds the relay.
How has that relay held up being mounted in that location?
No issues.