Kranzle 2160 TST Review
HTML-код
- Опубликовано: 7 июл 2024
- Review on the Kranzle 2160TST which was purchased through Aquaspray Kranzle.
kranzle-pressure-washers.co.u...
Music by _91nova - Gold Palms
Camera Equipment:
Camera: Canon 80D
amzn.to/2Lcx7C2
Lens: Sigma Art Series 18-35 f1.8
amzn.to/2X4FEtg
Mic: Rode Videomic Pro Plus
amzn.to/3pKriKZ
Tripod: Manfrotto MT055XPRO3
amzn.to/355pWCB
Fluid head: Manfrotto 502 Fluid video Head with flat base (MVH502AH)
amzn.to/3hGhKy4
Additional Camera: DJI Pocket 2 Creator Combo
amzn.to/3rS6zXo
Editing software: VEGAS PRO 18
www.vegascreativesoftware.com...
RUclips: / @jcvdvandd
Instagram: / jcvdvandd
Facebook: / jcvdvandd
Seriously, this is such a fantastically clear, detailed and well shot review.
I found it very helpful - Many thanks !
Thank you for your kind words.
Como podría obtener ese producto a Bolivia Cochabamba
The only solution I can think of is that you attempt to order this from a US distributor.
Tnx 4 sharing your insights!
Nice video, very informative.
Thank you.
Actually a good review
Thank you for your comment. Really appreciate it.
I'm torn between a 1152 or a 2160, I might just go 2160 as it will probably be the last pressure washer I ever buy!
nice video. what pressure setting do you set the unloader valve at while washing your car?
Thank you. To be perfectly honest, I leave the unloader valve at maximum capacity. However, I ensure I keep a safe distance from the body of the vehicle at all times to ensure a safe rinse. I could turn it down and then get closer to the vehicle, but I have not done so as yet. Hope it helps.
Hi
Great video, would you kindly have the correct link for the M22 thread piece that goes onto your hose
Thanks for your message. They’ve actually released an up to date version which can be found via the following link: mosmatic.co.uk/hp-t304-quick-connect-couplings/34677-mosmatic-obsessed-garage-M22-male-quick-connect-coupler-70905.html
I hope this helps.
Hi.
I was kinda hesitating between K2160 and Profi 195, which seem to be the best options you can get for domestic 230V.
I don't really know what I should favor, pressure or flow.
There is also the X A17 in between, but you lose 60° water (but I probably don't really need it) and 1400 rpm engine.
Hi. Thanks for your comment. That's a really good question. I guess it depends on what you intend to use the machine for. I don't know much about the Profi 195. However, based on what I can see; it appears to offer more in the adjustable pressure rating range, from 10 - 170 bar. The 2160 TST operating adjustable pressure rating is between 30 - 140 bar, which is more than sufficient for my use i.e. cleaning cars and the patio.
@@jcvdvandd i believe that the profi line also has a suction box to prevent empty running of the pump when using the suction feed or a low capacity tap.
Hi, how much louder is the K2160 compared to the K7 ?
Also how do they compare ?
Thanks.
Hi, in my opinion the K2160TST is louder than the K7. This is highlighted by the fact that the 2160TST is rated at 89db and K7 at 84db from what I recall. The 2160TST in my opinion is a premium all round machine. It’s more powerful than the K7. Having said that, the K7 is excellent for valeters/ detailers. In terms of comparison, I mainly use both the 2160TST and K7 for Valeting and Detailing. Both are excellent for this purpose. However, I feel the 2160TST has more horsepower to clean a driveway/ patio. I hope that’s answered your questions. Feel free to message me if you have further questions. Thanks.
Great video, do you think this power washer is suitable for washing farm machinery and tractors?
Hi. Thanks for watching and for your comment. I think you could use this to wash a tractor. However, I'm not sure whether it would be suitable for farm machinery. Apologies, I don't know anything about farm machinery. If you are based in the UK, you may wish to contact Aquaspray Kranzle to find out. Hope it helps.
Very good review. Brilliant machines, I've had my K10 122 TS for about the same time, bulletproof reliability. Karcher....sorry who?
Thanks you. Yes, they’re fantastic. The K10 122 TS is a great machine.
Great review of a great washer,you know there's not too many washing cars in there driveway anymore people gotten pure lazy
Thanks for your comment. It is a fantastic pressure washer. Everyone is different, but I prefer to wash my own cars. I find it therapeutic.
Sadly yes, because they are all in supermarket car parks or disused petrol station sites for a £5 scratch up job! Just used my K10 122 TS, such a great machine, it's got masses of power and pressure, and it's not even noisy.
@@23hublock1 they sure are its great there is still some quality products left on this planet that r not designed to break and throw away after 2 years
@@piee683 Which is exactly why I have walked away from Karcher after 2 machines in recent years, they are now just cheap, lightweight Chinese crap. I can understand the market for the masses and a price-point, but buy cheap...buy thrice!
@@23hublock1 do you have the quick connect setup
Hi is this model better than K1152 TST for car detailing business?
Hi. Thanks for your question. Unfortunately I cannot answer your question having never owned a K1152 TST. In my personal opinion and based on facts/ figures, I'd say the K2160TST is more powerful than the K1152 TST. The K1152 TST appears to be quite popular, I know Pan the organiser has the equivalent version in North America.
If you're based in the UK, it might be worth contacting Malcolm at Aquaspray Kranzle. He would be better placed to give you a fair view.
Excellent review and very informative 👍. Currently I use a Karcher K4 which is on its last legs. In terms of quality and performance I assume there’s no comparison between the Kranzle and Karcher ? Thanks
Thanks for your comment. In terms of quality, the Kranzle is more robust in my opinion. Please note, it’s probably an unfair comparison between a K4 and a 2160 TST. One is a domestic pressure washer (K4) and one could be considered more of a commercial pressure washer (2160 TST). However, if it’s the last pressure you’ll buy, then look no further than a Kranzle. Yes, it’s more expensive, but as long as you service it when required, it should last you a lifetime. Hope this helps.
what size nozzle at the gun lance
The size of the nozzle I am using is an 040 (40 degree nozzle)
Great video, What your size of nozzle 4.0 or 4.5
Thanks for your comment and question. The size nozzle I'm using is 4.0.
@@jcvdvandd Thank you so much.
@@jedi8770 you’re most welcome.
The house fuse, its 16 amp? Ges its not enough with a 10 amp fuse.?
It has a 13amp fuse.
What the flow rate? L/MIN With the 40 degree tip?
Not sure, as I’ve not measured it.
Did you had the chance to measure the water flow? I mean just run it in a bucket for 1 minutes and measure the volume? TIA
Thanks for your message. I haven't ever tested this to be honest.
@@jcvdvandd thank you for your reply, appreciated. Can you please do a test, I keep searching this aspect for days and seems not to be such a test on youtube. I think it would be very appreciated for a lot of users.
@@jcvdvandd For example for Kranzle K1152 the declared flow is 10L/min and measured is only 9L/min.
@@Kelu thanks for your reply. I will attempt to do a test when I get some time. I will respond to you once I've had a chance to carry this out. Speak soon.
Can the suction hose been to long on the kranzle 2160 ts cause it to lose pressure??
That’s a very good question. Unfortunately, it’s not something I have a comprehensive answer to.
I know Kranzle sell a suction hose which is 3 metres in length:
kranzle-pressure-washers.co.uk/collections/all-accessories/products/kranzle-3m-suction-filter-hose
Your best bet would be to call them up to see what their opinion is.
The fact that I cannot see a suction hose from Kranzle larger than 3 metres suggests it’s not something they’d recommend.
Yeah the suction hose was extremely long on this machine but I replaced it with the 3 metre hose and it’s still not giving full constant pressure.. the engine is kind of jumpy and sounds as do it’s not running at full power
@@datfella100 oh right. Not sure what the problem could be. Best to give them a shout to see if they can suggest anything.
is this better than the 1152
I cannot say as I have never used an 1152. However, I do know that the 2160 is a more powerful machine.
Are you in the UK or US ?
I’m based in the UK.
How much did the components from obsessed garage cost including shipping and taxes etc.? Looking at ordering a few things and purchasing a K10 in the coming days.
Hi Junaid. Thanks for your message. The obsessed garage all in was £355.99. I have since seen that you can order this package from Mosmatic UK. However, it does not have the Obseesed Garage branding on it. K10 is 👌🏼.
The link for Mosmatic UK package is as follows: mosmatic.co.uk/car-detailing-collection/34625-81-obsessed-garage-mosmatic-professional-hp-gun-lance-detailing-collection.html#/1327-nozzle_size-040/1337-nozzle_spray_angle-40
You will also need to order the following: mosmatic.co.uk/hp-t304-quick-connect-couplings/3713-mosmatic-hp-couplings-quick-connect-T304-38f-70012.html
& this: mosmatic.co.uk/fittings/1746-ver-500-bar-stainless-steel-51280-g3-8-m-x-m22x15-m.html
This will then allow you to connect the gun to your Kranzle hose.
It is expensive; but it is completely down to you whether you want this package. I appreciate it is not for everyone due to cost.
@@jcvdvandd thanks for your reply. I’ve seen the Mosmatic UK package, however the gun itself is different to the specific one made and distributed exclusively for Obsessed Garage. Their gun has a few tweaks over the regular one. I’m thinking I may as well order it from them and pay the extra costs. I’ve been trying to source the Coxreel too and have a lead on that for around £200. Next on the list is the Kobrajet hose, though I want the grey one so need to find a supplier for that.
@@jcvdvandd how long did shipping take and what was the customs/import procedure? Did you have to go to the post office and pay tax/import duty or do you pay that to OG in advance?
Isn't this the model that takes 15 Amps from a 13A supply?
I'm not entirely sure. But here is a copy of the manual, not sure if this helps: www.theultimatefinish.co.uk/Documents/Kranzle_K2160_TST_Operating_Manual.pdf
@@jcvdvandd Manual say input power is 3200Watts. Watts / volts = amps.. 3200 / 230 = 13.9130 Amps That is assuming an average 230V for your supply. It varies from place to place as low as 220V and as high as 240V.. Plugging tho values in the Amps varies from a high of 14.545Amps to a low of 13.333Amps. All voltages drive more current than house wiring circuits are designed for. Plug sockets are limited to 3000 Watts (3kW) So home users avoid. They have history of blowing fuses.
What is rate of this
It’s rated at 11 litres per minute. You can find further information here: kranzle-pressure-washers.co.uk/products/kranzle-k-2160-tst-with-dirtkiller