How to make acrylic glass bender || cheap way to make acrylic bending machine By Selftech Projects

1:The wire i used is extracted from a heater spring available at any electronic shope.
2: one side of the wire should be tighten to the screw at one side and another side of the wire should be tighten to a ballpoint spring. The ballpoint spring should be stretched and then attached to another screw as you can see in the video.
3: we use the spring because when the wire is heated, it expands,
4: 12v computer power supply is best for this machine.
5: important thing is. Use 12v plus minus wire at both ends of the wire...not screws..
I hope this would help. Thumbs Up
Please subscribe. ❤️

[@mumumumumumumummm]

Thank you so much for this video. This is the simplest and fastest way to make a diy bender but it works just as amazing!!!! Thank you for sharing!!!

[@ravebrave8866]

jai ho kalwanti bhai... Jai ho...

[@selftechprojects6003]

Thanks

[@MarvinResper]

Awesome thanks for information

[@rafidkhan643]

How many watt PSU you used? And what type of wire is that?

[@selftechprojects6003]

i have connected just 150 watts supply
and the wire is taken from the spring of a heater.

[@dignitas1980]

One important question : how can you tell which is plus-minus wire on the power supply? I have 450W computer power supply with a bunch of wires...

[@selftechprojects6003]

All the yellow wires are 12v
Red wires are 5v
If there is a white wire,it is 3v
All the black wires are negative (-)

[@dignitas1980]

@@selftechprojects6003 Thanks! I`ll give it a try.

[@jaffarnizamikhan1602]

What wire is used for heating
And what power supply you have used.. plz mention

[@gunturjr9959]

Untuk buat ukuran 1.5 m kawan nikelin 1 mm , tebal akrilik 2-3 mm butuh power supply yg berapa volt dan berapa Ampere

[@ashish4015]

nichrom wire kitne watt ka liye 1000, 1500 ya 2000 watt ka

[@artline3dsignsialkotpakist736]

12v Hogy or Amp power kitna hona chaheya aik feet ma kitna amp hona chaheya

[@selftechprojects6003]

Brother kindly use a computer power supply to provide anough amp. Computer PSU is enough for upto 2 feets.

[@selftechprojects6003]

If you need more than two feets than use two PSUs in series to make it 24v. Dont worry nothing will blow
Also requested to subscribe the channel bro. Thanks

[@prakashkarmali2514]

Gol Aakar me kese kate

[@8xvijay_gaming]

Why is the power

[@selftechprojects6003]

12v computer pc power supply

[@trifadfamily4119]

Bro PSU nya yang berapa Amper, soalnya aku pake yang 12v 1,5 amper kaya yang gak naik.

[@selftechprojects6003]

Psu 12v upto 3 amp is enough

[@nganshem8596]

Hi, apa voltage guna nya?

[@selftechprojects6003]

12v computer pc power supply.
Yellow 12v plus
Black 12v minus

[@deddy031]

Tanya om,, itu bok nya bok apa namanya🙏🏻🙏🏻

[@selftechprojects6003]

🌹

[@mangajay129]

Power suplay

[@quemeese]

no information given, what a waste!!

[@selftechprojects6003]

1:The wire i used is extracted from a heater spring available at any electronic shope.
2: one side of the wire should be tighten to the screw at one side and another side of the wire should be tighten to a ballpoint spring. The ballpoint spring should be stretched and then attached to another screw as you can see in the video.
3: we use the spring because when the wire is heated, it expands,
4: 12v computer power supply is best for this machine.
5: important thing is. Use 12v plus minus wire at both ends of the wire...not screws..
I hope this would help. Thumbs Up
Please subscribe. ❤️

[@quemeese]

@@selftechprojects6003 thank you for the reply.