There aren't any other detailed videos out there about vesc being used on scooters so I'm pretty exited how your project will turn out. That aside, I'm curious how those M365 motors perform in higher voltage. And those fsesc 4.2 plus have issues in FOC mode.
i have a 365 clone, im wanting to add an additional motor on the read, and a plug and play battery pack. is this mod compatible with a Rita mod so i can just add any battery within the limits. Thanks
shut-up about that 70 volt. Instead give us the S, How many series! 19s? why? cause if you google 70volt vesc you aint finding one. So make sure you know your battery configuration!
Siema. Chciałbym zapytać czy te wartości 23A i 27A to są pràdy ciągłe dla tych silników czy pràdy chwilowe w peak'u? Edit: Yo. I would like to ask if these values 23A and 27A are continuous currents for these motors or instantaneous peak currents?
1:08 15 amps? thats incredibly low! that power can't push you. Unless your talking about capacity which is ever scooter does -_- it so dumb! Its Ah = ampere hour. Not amps = discharge rate.
I ment 15ah capacity, max peak discharge which i already tested 70A. Show me other m365 which looks like stock and have 12s 5p battery pack built in to the deck with vesc 🤟
@@PirateWasHere prawie padłem 🤣🤣 Świetny projekt. Jak się skuter sprawuje po paru miesiącach na 2wd? Czy twoim zdaniem hamowanie silniczkami daje radę i wystarczy czy lepiej zamontować dodatkowo tarcze na jednym z kół ?
This was the reason why I have subscribed to you, so it's nice that you have delivered!
Yes finally. Can't wait to copy all of your hard work. Good job.
🤣🤣👼🍻
Great project, sorry about the leg, get well soon bro!
There aren't any other detailed videos out there about vesc being used on scooters so I'm pretty exited how your project will turn out.
That aside, I'm curious how those M365 motors perform in higher voltage. And those fsesc 4.2 plus have issues in FOC mode.
usually your work great Pirate. 😎🙏🇦🇿🛴
holy hub motor,
these vesc controllers are the underdogs, i want to try them out!!
By the way, don't forget to check out the traction control option ;) I think alot of people would be interested :D
Better late than never, take care mate, nice work!
Na to czekałem!!
Get well soon 👨⚕️🩹😊👍
Hi can you show how you make battery spacer please
Might need to de-tune from the automatic setup values which might be more like maximum heat values. Maybe?
with his setup he cant use all the power the controller can give.
A1 videos
What do you think, how power will be choose this wesc if try to use 16S battery pack?
i love your videos and i will like make 2wd
Good recovery. Did you do that with Laotie?
for a xiaomi mi pro 2 20s which FSESC do you recommend??
Sick! 🔥
What 3d printer do you have to print those big parts
Good video buddy.
i have a 365 clone, im wanting to add an additional motor on the read, and a plug and play battery pack. is this mod compatible with a Rita mod so i can just add any battery within the limits. Thanks
Very cool!
next episode in next year ? :P
i have a question: can you put like....cruze control?
Yes ;)
Hi I need a vesc for 70 volt battery
shut-up about that 70 volt. Instead give us the S, How many series! 19s?
why? cause if you google 70volt vesc you aint finding one. So make sure you know your battery configuration!
is it only best 10s ,I want to add a vesc to a larger scooter 48/52v .1000w hubmotor.... Is this possible?
12s is fine. 13s too with BLDC and not foc.
Wher i buy the hub in rare motor please?
Hi how do I connect vesc to my charging port on scooter
you don't connect the charging port to VESC. connect it to battery!
Does the stock dash work with the controller ? is it possible to connect them?
it will not work :(
How Can i contact you for buyng some 3d parts
How can we get those adapters and spacers to mount the whee at the rear?
you can get projects from my Patron , for it send to me PM pirate.ac/contact/
@@PirateWasHere you are the best man!
Which do you recomend laotie es18p or laotie ti30?
Ti30
So how to connected the Thumb Throttle with fsesc is really hard and break?
ADC and ADC2 ( for brakes i think?)
@@XECUTA2 do you have Facebook
Siema. Chciałbym zapytać czy te wartości 23A i 27A to są pràdy ciągłe dla tych silników czy pràdy chwilowe w peak'u?
Edit:
Yo. I would like to ask if these values 23A and 27A are continuous currents for these motors or instantaneous peak currents?
it doesnt matter! whatever detection gives the esc can handle that!
where can i buy this battery
well you have to make it ;)
@@PirateWasHere q_Q
1:08 15 amps? thats incredibly low! that power can't push you. Unless your talking about capacity which is ever scooter does -_- it so dumb! Its Ah = ampere hour. Not amps = discharge rate.
I ment 15ah capacity, max peak discharge which i already tested 70A. Show me other m365 which looks like stock and have 12s 5p battery pack built in to the deck with vesc 🤟
@@PirateWasHere now thats huge. Waiting for that part.
Kurde jak nie znasz polskiego to daj napisy po polsku
Proponuje nauczyc sie podstaw ang
@@PirateWasHere i co jakoś umiesz polski coooo to co pieprzysz że nie umiesz
@@wiolettajasinska8875 nigdy nie napisalem ze nie umiem, tylko ze Ja nie znaju :p
@@PirateWasHere prawie padłem 🤣🤣
Świetny projekt. Jak się skuter sprawuje po paru miesiącach na 2wd? Czy twoim zdaniem hamowanie silniczkami daje radę i wystarczy czy lepiej zamontować dodatkowo tarcze na jednym z kół ?
@@haloonek26 vesc da rade ale potrzebna wersja 6.6 ktora jest bezpieczniejsza z uwagi na wyzsze moce