Sorry to be so off topic but does anybody know a tool to get back into an Instagram account..? I was dumb lost my password. I appreciate any tips you can offer me!
@Zayd Elijah i really appreciate your reply. I found the site thru google and im in the hacking process atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
Good job man. I'm going to the same thing on a 99 Ranger. Ford did make it easy for us with the room in the grill. Looks like the design on the back your grill is the same as the ranger just bigger. And of course the front.
You should pickup a few of those cheap screw scissor jack u get in stock cars and pickups I like to get them at the local pick a part there great u can weld to them with no worries there cheap great for mocking that front end up weld some mounts to the Jack's that aren't in the way of your mounts your building set the height and bam your ready to build
W/headlamps on jeeps & trucks when u carry wt they r aiming height proplem same towing & big tires same bs so lower the better if hood can close fender deal.
truck is going to have custom glass made for it! If you are asking whether things are square or not, my dad and brother spent a lot of time taking measurements from different points to make sure it was right.
One of the builders for the Build & Battle: Building a Jeep XJ and Ford Explorer to SEND IT on the Hoonigan Project Cars channel used beer carton as shim for welding tabs. Reminded me of the match cover points shim trick. Haha
The rear of this truck is going to be super sleek, with minimum things above the bed line. My brother wanted to do that to make things look a little bit cleaner, rather than seeing a ratchet out back if that makes sense! It may be a little bit more difficult to get the tire off, but for how often it is actually coming off, it shouldn't be a big deal. Thanks for the comment! I thought we may get a question about this.
This truck will have a one off clip on it, not sure if it is going to be one piece or three piece, but all custom built for this specific truck. May serve as a piece for other center mounted obs trucks that are running 40's as well.
Man I love your videos but one question once you put the hood on that truck first and then work that way to the header panel make sure everything is square in looking right?
Make sure to hit that like button and share the video! Who wants to see a question and answer video for 10k subs?
Well I got questions..
Sooo freak yea
Good job! Like from Argentina 🇦🇷🤘😎
Sorry to be so off topic but does anybody know a tool to get back into an Instagram account..?
I was dumb lost my password. I appreciate any tips you can offer me!
@Grant Brandon Instablaster =)
@Zayd Elijah i really appreciate your reply. I found the site thru google and im in the hacking process atm.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
nice fab work* gold star sticker work.
I see Jerry there at 7:30 I believe
Good job man. I'm going to the same thing on a 99 Ranger. Ford did make it easy for us with the room in the grill. Looks like the design on the back your grill is the same as the ranger just bigger. And of course the front.
Love the channel, attention to detail and I don't think I've heard a cuss word yet. Refreshing.
yea they are very polished clearly have a plan. reminds me of cleatus back in 2015.
Plate the top of the rad to the grille like duct work to get like a wind tunnel effect on it
You should pickup a few of those cheap screw scissor jack u get in stock cars and pickups I like to get them at the local pick a part there great u can weld to them with no worries there cheap great for mocking that front end up weld some mounts to the Jack's that aren't in the way of your mounts your building set the height and bam your ready to build
W/headlamps on jeeps & trucks when u carry wt they r aiming height proplem same towing & big tires same bs so lower the better if hood can close fender deal.
Would you be able to tell me where he got that new header panel gear?
Looking forward to the coming vids on this beast. Hopefully once this truck is done in the future you guys get a chance to film it eat.
Great video. Doing a great job on fabrication
Loved the video. Good tips and tricks.
How the hell do you get the engine in and out of that thing?
You say you have moved the grille down and out, but I did not see you offering hood and fenders to make sure all lines up correctly.
truck is going to have custom glass made for it! If you are asking whether things are square or not, my dad and brother spent a lot of time taking measurements from different points to make sure it was right.
One of the builders for the Build & Battle: Building a Jeep XJ and Ford Explorer to SEND IT on the Hoonigan Project Cars
channel used beer carton as shim for welding tabs. Reminded me of the match cover points shim trick. Haha
Nice big dog 🤙🏻🤙🏻
Dang!
It's about time!!
Another dope vid from wing's!👍🏻
Are you using 4130 or just mild steel?
Yoooo!! WingsWorld make some merch so we can support you guys
We were thinking about it! Maybe when we hit 10k subscribers....
Why did you lay the tires down ,how come you don't just stand the tire up so that you can have two side by side
Just curious why you mounted the spare tire strap that way with the ratchet towards the front of the truck?
The rear of this truck is going to be super sleek, with minimum things above the bed line. My brother wanted to do that to make things look a little bit cleaner, rather than seeing a ratchet out back if that makes sense! It may be a little bit more difficult to get the tire off, but for how often it is actually coming off, it shouldn't be a big deal. Thanks for the comment! I thought we may get a question about this.
how are you gonna get glass that will work with the header panel pushed 4" forwards?
This truck will have a one off clip on it, not sure if it is going to be one piece or three piece, but all custom built for this specific truck. May serve as a piece for other center mounted obs trucks that are running 40's as well.
right on
✌
nice
what do you do for a living?
I think we'll answer all these kinds of questions in the Q&A video! Get them a lot
@@WingsWorldChannel cos I also want to work on cars all day in my garage like you guys and not slave away full time for the next 60 years of my life
Man I love your videos but one question once you put the hood on that truck first and then work that way to the header panel make sure everything is square in looking right?
I hace a ranger And liked measures to twim e Beam forma this because un argentina not pieces for this to Converter to prerunner
Dude your work looks good! Can you build me a tube bumper for the front and rear$$$
Saaa duuuuu
ASSAAAH DUDES
First