Ha ha, I watched this video this morning then bumped into you at lunchtime……lol……Great to meet you🤗🙏That blower looks like the go! Better order myself a teeshirt now! 🥳👍
USB-C does NOT make fast read and write speeds. the USB version (aka 3.0, 3.1 or 3.2) makes the speed. USB-C is just the form factor of the port and can run at slow USB 2.0 speeds.
Great accessories. I have the Neewer Mini Tripod, and its great. I've used it when I go outdoors to shoot, and I find a picnic table in a park and set it up. It extends high enough to reach my eye level, which is perfect for my needs. And it has a very sturdy build. I also have the Zoom F3, which I consider one of the best investments I've made for filmmaking. It makes it easy to quickly capture foley and voice recordings saving lots of production time. The Rode Wireless Pro is something I am planning on getting at some point. At the moment, I have several wireless systems that work quite well. But, the Wireless Pro is a great piece of gear. Being able to raise my desk from standing to sitting is huge. At the moment, I have a L-shaped desk that would need to be replaced completely if I were to get a motorized desk. Which is no big deal, since being able to stand or sit while working actually encourages me to work more. Thanks again. And congratulations on breaking through 100K of subscribers.
My Sony K3M, and Sony ECM-B1M are musts for audio for me. That auto mode makes recording audio so easy and fast for levels that I don’t even have to think about. I use the Rode NTG5 with the K3M in the studio and I love that combo. Great video as always! #loveyourcreators
My Favorite is an ifootage carbon monopod, with their small Komodo 5s head. Quick and easy to go around and get some smooth b roll, and also can take the bottom off and make it a table top tripod.
That is fair. I personally haven't had any issues so I cannot confirm your case. It would be moreso the 1/4" 20 screw isn't strong enough or not tightened enough. The Falcam base plate has a piece of rubber like most base plates to avoid spinning
Hello Jason! I have a question, if I charge my original NP FZ100 with chargers from other brands, could it end up being damaged? Or do I have to buy an official Sony charger to avoid inconveniences?
With the magnetic card reader, can use it on an iPhone 15 and record ProRes directly to the card just by attaching behind the phone without any additional straps and clamps.
not for a wide shot that records long takes. for shorter clips absolutely. I would suggest a7siii, FX3 or FX30 for professional wedding content with reliability
Thanks for these. Nice variety and some cool ones I haven’t heard of before. I really love the Ulanzi cooling fan. It helps a ton when shooting outdoors for me
do you think the zoom f3 is small enough to be used with a lavalier mic directly, or would it be better to get a wireless transmittor like a dji mic 2 when it comes out and then plug the reciever in the f3 while having the lav mic plugged into the transmittor
@@JasonMorrisphotocinema thank you for the answer, honestly i think i'll wait for the dji mic 2 since my experience with rode's wireless ecosystem wasnt too pleasant
I hate arca swiss and only use manfrotto ones. Very solid on fluid head tripods and very secure in a rig with the extra pin that prevents it from falling off if you accidently loosen up the screw.
Manfrotto is decent, just too large and some manfrotto mounts that claim to be manfrotto aren’t the same size. Sirui have manfrotto mounts on their tripods but aren’t true manfrotto which is a shame
@@JasonMorrisphotocinema That's crazy! Haven't had that problem with Camvate, Smallrig, Nitze, and some other unknown brands yet. From your work you seem to need Manfrotto more than me as you have bigger cameras and setups. If there were many Arca Swiss fluid head tripods then it would make sense to me to get large Arca Swiss plates for example. I also use some heavy lenses like Sony 200-600mm G which I have a Manfrotto plate in its foot for filming wildlife.
the two biggest ones are DJI manfrotto plate for the RS2 i think it was, 2x sirui tripods and smallrig VCT plate attachment that aren't true manfrotto size@@Bo_Hazem
@@JasonMorrisphotocinema My biggest problem with Arca accessories is that most of them are light duty and mostly favor ball heads vs fluid heads and have small clamps. Filming at 600mm with manfrotto, even though using a cheap Chinese fluid head, is rock solid and many were shocked about how smooth the movements are. Also I don't turn off IBIS on tripods because that's just an old advice that seems to be running around until today. Would love to see a video about the plates you had and your in-depth take on the matter, if that's something you think is worth a video.
Because it is a very small micro four thirds sensor. Information is much easier to process off the tiny sensors. APS-C/Super35 & Full Frame sensors have much more data to process which means more heat generation
This sounds like a lot of sponsored stuff to me. Surely there are more usueful camera accessories out than these. Why would you need that baby blower if a normal one does the same job? Same goes for leading you into the arca swiss plate system...i can see the advantages but still seems very "brand heavy" to me
50% of them. Hard to categorise this. It’s camera enthusiasts, photographer, editor, videographer, content creator accessories.. not exactly an easy title
Those coolers are pretty much useless imo, if you ever built PCs one would know that you would need to make contact with the surface, for example with thermal pads otherwise you won't be really dissipating any heat
I've done full tests with all these fans and have multiple videos on this channel showing the results. It cools down the chassis enough to get 10-20 minutes of extra recording depending on the environment. Long story short, they work to a certain degree and they are not useless. Just not incredibly efficient, but enough for some. If you're using PC's as an example then you would be saying PC fans are useless and should not be used, yet all PCs will still have external fans in the casing.
My dude! Thank you for featuring the Tri Charge!
So stoked on seeing you use it :D
Gear carts for on location shooting. Absolute must haves! No more broken backs from hauling all your gear on your back all the time.
Agreed. Mine was just very expensive so I didn’t want to add it to the list 😅
Great top and review! The Sony NP-FZ100 Small Rig 3824B battery is not named, it can be listed to the top with USB-C fast charging.
yes. brilliant product I have seen. I just don't own it so I can't really judge it fully
Ha ha, I watched this video this morning then bumped into you at lunchtime……lol……Great to meet you🤗🙏That blower looks like the go! Better order myself a teeshirt now! 🥳👍
nutty nash! great to meet you mate.
USB-C does NOT make fast read and write speeds. the USB version (aka 3.0, 3.1 or 3.2) makes the speed. USB-C is just the form factor of the port and can run at slow USB 2.0 speeds.
Good one! Have an Omnidesk as well! Glad it made your list!
Zoom F3 is the goat. Get a variety of cables and you're good. I use mine for wedding ceremonies and tap into the sound board.
Yeah far better than I expected that’s for sure 🔥
Killer office setup man. Looks amazing. I'd add some sort of multi tool, with some allen keys and something to nip up tripod base plates.
Great gadgets....will the Falcam plate fit the Sirius VA5 video head? My Arca swiss does not...
Oh wow that desk controller is pretty!
it is !
Something off topic, you have such an amazing way of addressing your audience. Kudos mate.
I'm ordering one of those baby blowers today. What a great idea 😀👍
Worth it 🔥
@@JasonMorrisphotocinema arrived today. So good! 😀👍
Jason I have built a custom aluminium block that mounts and butts up against the back face of my ZV-1... UNLIMITED RECORDING TIME AT 4K30 100 Mbps.
Great accessories. I have the Neewer Mini Tripod, and its great. I've used it when I go outdoors to shoot, and I find a picnic table in a park and set it up. It extends high enough to reach my eye level, which is perfect for my needs. And it has a very sturdy build.
I also have the Zoom F3, which I consider one of the best investments I've made for filmmaking. It makes it easy to quickly capture foley and voice recordings saving lots of production time. The Rode Wireless Pro is something I am planning on getting at some point. At the moment, I have several wireless systems that work quite well. But, the Wireless Pro is a great piece of gear.
Being able to raise my desk from standing to sitting is huge. At the moment, I have a L-shaped desk that would need to be replaced completely if I were to get a motorized desk. Which is no big deal, since being able to stand or sit while working actually encourages me to work more.
Thanks again. And congratulations on breaking through 100K of subscribers.
Thanks for watching. Surprisingly the sit stand desk has been amazing considering what it does
My Sony K3M, and Sony ECM-B1M are musts for audio for me. That auto mode makes recording audio so easy and fast for levels that I don’t even have to think about. I use the Rode NTG5 with the K3M in the studio and I love that combo. Great video as always! #loveyourcreators
agreed with the ECM-B1M. That comes with me everywhere when I travel. thanks for stopping by Paul
Absolutely fantastic.
My Favorite is an ifootage carbon monopod, with their small Komodo 5s head. Quick and easy to go around and get some smooth b roll, and also can take the bottom off and make it a table top tripod.
Thanks for commenting that
Sony is badazz although never had a Lumix overheat.Cool stuff! Vid noted for reference.Thanks
Yeah canon, Fuji and Sony have some cameras that overheat
I hate cheap knifes. I’m excited about the pencil.
Incredible design!
Super informative and helpful. Many thanks! 🎉
Thanks brother. We need to film sometime!
Awesome video! But I would have to disagree with the falcam plate. I’m constantly having problems with screws loosening at the bottom of the camera.
That is fair. I personally haven't had any issues so I cannot confirm your case. It would be moreso the 1/4" 20 screw isn't strong enough or not tightened enough. The Falcam base plate has a piece of rubber like most base plates to avoid spinning
Zoom f3 is nice tho it la is of a mini jack input for a more versatility
Hello Jason! I have a question, if I charge my original NP FZ100 with chargers from other brands, could it end up being damaged? Or do I have to buy an official Sony charger to avoid inconveniences?
With the magnetic card reader, can use it on an iPhone 15 and record ProRes directly to the card just by attaching behind the phone without any additional straps and clamps.
Oh I have not tried this before
Which is better, Smallrig or Tilta cage?
super informative. tnx so much.
Thank you for watching.
Do you think the babyblower is safe for the sensor/ibis?
Does the External fan make the ZV-e1 a viable wedding camera?
not for a wide shot that records long takes. for shorter clips absolutely. I would suggest a7siii, FX3 or FX30 for professional wedding content with reliability
love the zoom f3
A champion device!
Wish there was a tri charge for Panasonic there’s so many of us that use lumix
Always Support you 👍 😉
Thank you 🙏🏽
Thanks for these. Nice variety and some cool ones I haven’t heard of before.
I really love the Ulanzi cooling fan. It helps a ton when shooting outdoors for me
do you think the zoom f3 is small enough to be used with a lavalier mic directly, or would it be better to get a wireless transmittor like a dji mic 2 when it comes out and then plug the reciever in the f3 while having the lav mic plugged into the transmittor
you would be better of using the rode wireless pro. F3 is a touch too big to mount on someone
@@JasonMorrisphotocinema thank you for the answer, honestly i think i'll wait for the dji mic 2 since my experience with rode's wireless ecosystem wasnt too pleasant
Great ideas and accessories!
Thanks Steve. Get a Sony already 😂
@@JasonMorrisphotocinema One day my friend....One day!
The unboxing knife is illegal in the UK!
Can the tri-charge also be used to supply power to your camera while filming?
Yes it can which is great!
Come on, are these fans really #1? xD My ZV-E1 does NOT overheat.in 4k24. Let me try 4k120 soonish.
Is there a canon version ? 7:01
I hate arca swiss and only use manfrotto ones. Very solid on fluid head tripods and very secure in a rig with the extra pin that prevents it from falling off if you accidently loosen up the screw.
Manfrotto is decent, just too large and some manfrotto mounts that claim to be manfrotto aren’t the same size. Sirui have manfrotto mounts on their tripods but aren’t true manfrotto which is a shame
@@JasonMorrisphotocinema That's crazy! Haven't had that problem with Camvate, Smallrig, Nitze, and some other unknown brands yet. From your work you seem to need Manfrotto more than me as you have bigger cameras and setups.
If there were many Arca Swiss fluid head tripods then it would make sense to me to get large Arca Swiss plates for example. I also use some heavy lenses like Sony 200-600mm G which I have a Manfrotto plate in its foot for filming wildlife.
the two biggest ones are DJI manfrotto plate for the RS2 i think it was, 2x sirui tripods and smallrig VCT plate attachment that aren't true manfrotto size@@Bo_Hazem
@@JasonMorrisphotocinema My biggest problem with Arca accessories is that most of them are light duty and mostly favor ball heads vs fluid heads and have small clamps. Filming at 600mm with manfrotto, even though using a cheap Chinese fluid head, is rock solid and many were shocked about how smooth the movements are.
Also I don't turn off IBIS on tripods because that's just an old advice that seems to be running around until today. Would love to see a video about the plates you had and your in-depth take on the matter, if that's something you think is worth a video.
@@Bo_Hazem yeah agreed. They are definitely for lighter set ups for sure. Hence why I only use them with my smaller Sony cameras
Yeah Panasonic gh6 all day every day no over heating.
Because it is a very small micro four thirds sensor. Information is much easier to process off the tiny sensors. APS-C/Super35 & Full Frame sensors have much more data to process which means more heat generation
Is there a plant living on the tripod?
😅 it's a water level. To make sure it's balanced
3:43 would be a very weird choice to level a tripod but woh am I to judge 😂
@FreePsyk oh no. I missed that. Thought you meant the green thing on the tripod 😅
@@jaywin7 well it’s also a green thing on the tripod 😅😂
@FreePsyk guess only explanation I can think off is its to give him fresh oxygen each time he take a photo 😄 🤣
This sounds like a lot of sponsored stuff to me. Surely there are more usueful camera accessories out than these. Why would you need that baby blower if a normal one does the same job? Same goes for leading you into the arca swiss plate system...i can see the advantages but still seems very "brand heavy" to me
None of it is sponsored dude
this doesnt look like camera accessories 😂
50% of them. Hard to categorise this. It’s camera enthusiasts, photographer, editor, videographer, content creator accessories.. not exactly an easy title
They are all camera accessories? What video did you watch 😂
Have you ever weight your camera setup with everything?
I have not to be honest. Something that does not worry me unless I require a specific weight for travel
@@JasonMorrisphotocinema I'm asking because, in general, travel tripods has a payload limit.
@@diegocaracasfc oh yes. My travel set up is standard and not heavy at all. I have video tripods for my larger cinema cameras
First!
Awesome speed 🔥
What???? There's an Infinity Pencil? I thought they only had an Infinity Gauntlet.
Yeeah collect all five and you can control the universe
@@JasonMorrisphotocinema needed! 😂
Those coolers are pretty much useless imo, if you ever built PCs one would know that you would need to make contact with the surface, for example with thermal pads otherwise you won't be really dissipating any heat
I've done full tests with all these fans and have multiple videos on this channel showing the results. It cools down the chassis enough to get 10-20 minutes of extra recording depending on the environment.
Long story short, they work to a certain degree and they are not useless. Just not incredibly efficient, but enough for some.
If you're using PC's as an example then you would be saying PC fans are useless and should not be used, yet all PCs will still have external fans in the casing.
Why RUclipsrs never say the price range😅
The price range varies far too much. Literally from a $7 pencil to a $700 desk
second!
Nice 🔥
The Tri-charger, OH Yeah! Sony original charger is is such a rip-off
sony don't even offer chargers anymore. rip :(
unboxing knife....humanity has no chance
Righto champ 🫡
@@JasonMorrisphotocinema no idea what this means but good day to you too
mehh for vloggers only
This top is 💩