DONT DELETE THE 335i COWL. water comes in and destroys the Dme. We have seen 9 waterlogged dmes already. What you need to do is cut the oem cowl thin, tapering out from the centre (like the m3 cowl) and replace the rubber trim back onto it. Then use BMS filters on the cabin air intakes.
U can, just need to cover it the BMS filters or something similar...also I added an L shaped rubber around the edge to prevent water from coming into the engine bay & it's working fantastic 👌 easy to work on if I need now and less weight and heat too
@@LOLVTECFAG there are always outliers. But the fact that I’ve seen 9 already means it’s not a once off freak accident - there is an inherent design flaw from a full delete. It takes no money and only minimal time to cut the oem cowl and remount the rubber insert. That’s the way everyone should be going over the cowl delete .
Worst DI engine for carbon build up is the Ford Eco-boost. I put a Meth kit on My little Gm EcoTec 2.0 just to help wash the backside of the intake valves and keep the IAT's cool as well. Barra-Stang flywheel bolts need some red lock tight, good thing you caught it before it wallowed out the threads in the crank.
Maybe you need to balance the crank too? It's a common thing to do for engine builders here in germany. That should create less vibrations wich also means the bearings will work better and last longer.
Actually yes, the valves do adjust to the gunk build up. I work as calibration engineer and was involved with the valvetronic system calibration on an other bmw enigne. Like yours, it is fitted with the valvetronic system which regulates the air flow, other than using the throttle body. There are models applied in the ecu which can derive gunk build up and adjust the valve lift to a certain extent. After blast cleaning the valves, the system should be "taught", that the valves are clean again and it can practically work like it was new again.
@@716tg3 lol same. I live like 10 minutes from psi and my friend and I have been through all the n54 lows. When he was having all those problems with it I was screaming at the screen lol. Super easy fixed that a bmw shop shouldve known about.
Im happy to see you still have the 335i. After all these years. Havnt spent much time watching or on the gram about your life journey. Damn hella change. Keep up the good work. Keep up on the bmx too.
Adam, literally needs a rebuild every other day for his daily race-car antics. 😂 This man will go one video. Blow shit up, then document an entire series dedicated to messing shit up. 😆
The N54 stock intake manifold is definitely great to take on and off and is durable for boost, however if you run Methanol it will corrode the plastic intake manifold and you'll blow a hole in the manifold. Full on Brian O'Connor danger to manifold haha
Soo rad seeing the "O.G." 335i getting some love and be back on the channel. That's the car that basically started your RUclips automotive journey and it's also my favorite car that you own lol.
Braums aren’t up to the quality he would want. They also can break pretty easily in the eventuality of a crash I have them in my car, so I speak from experience
@Gavin Adams wouldn’t go that far. Mine have lasted 4 years with no noticeable wear and have worked great for Autocross/track. Just saying they’re not on par with brides or recaros
Glad to see you posting more 335 content, i wish I still had mine. I crashed it 5 days ago cause someone turned right in front of me while I was going through a green light😢
A billet valve cover would also help with the N54 valves they block off the oil ports so no more oil on top of your valves!!! Check out performance boutique Canadian company and a buddy of mine he makes them they are beautiful👍🏼
I swapped over to the M3 cowls and am quite happy about it. Gives you more room to access the engine, cuts weight and continues to provide water abatement
All i can say is atleast you still have the original car that kick started this channel into what it is 👍 keep up the builds like that killer r32 and the barra mustang and of course the cream og 🤙 what an adventure i remember the skate ramp getting built..
Skyline vs 335i needs to happen now. You should time each of your cars around a certain track or just roll race them all to see where they all stack up
Loving the 335i content! I want to see the rs6 vs skyline vs 335i would be a awesome race, and if you want to change something on the car you should definitely consider making a custom LZMFG wrap to the car
I've commented this on your videos before regarding loose nuts and bolts, but I'll post it again and hope that one day you see it. Use locking wire! Drill a tiny hole through the edge of the bolt heads, run locking wire through them all, and they should never ever come loose.
1.8ts aren't known for gunk or sludge. The 2.0TFSI that have been used in 04 onwards are known for all sorts of gunk and carbon build up because they're direct injection.
12:38 the walnut contains a oil which makes it the superior, yet odd, media. Whereas sand is dry. Subsequently, etching is a byproduct of said particular media unlike walnut.
Like how Adam took Collette a lizard and She went DIRECTLY to MOM mode And sorted the little guy out ,then when RIGHT back to the vette and wrenching without looking back!
I joined this channel because of that 335i and your inspiration to obtain it. Maybe some new wheels, i love the TE idea. Also try to get the car completely dialed so it can go up against the R34 when its done. Now that would be a badass race. N54 vs Rb26
I worked on aircraft for a while. We used safety wire bolts on almost every important part. You all should look into those for the flywheel bolts. It’ll stop them from backing out. Y’all should take a look into it
I could never comfortably stack my cars at my house like that. Not that I'm worried my cars would fall on eachother, it's that i own a shitbox e36 and i would come back the next day and the car underneath would be soaked in oil
I’m not completely sure because of the quality of the picture but that lizard was a Cuban brown anole it is invasive in Florida and you would actually be potential helping the native species by killing colette’s brethren !!! :)
@@ishaanmann5856 equal sized tacks in the same place on each bolt, no I've seen it done on at least 6 baras, and I don't commonly look at baras or even work on them, just a think that people do because it's cheap insurance
Idea for the 335i - Interior Upgrade! -replace headliner and pillar covers with charcoal black -replace seats with custom red leather Recaro's to match interior -replace fake wood trim with carbon 🤩🤩🤩
4 года назад+37
Why is your mum's car still in your shop, doesn't she like it?
He said it needs a full shakedown still. He said it's easy to throw a swap in there in a few days, but takes a bit longer to get it full dialed where he knows she can drive it to the beach and home with zero problems
Adam's intension was good but sadly its not mom's peace of bread so I think She was way happier when he did Turbo fit, Would be much better if He try to buy him comfortable vehicle instead from now on.
I’ve seen been a fan ever since he started RUclips I seen everything come up and down this guy is who I look up to he has showed me love in cars I remember when he only had the 240 and the bmw
DONT DELETE THE 335i COWL. water comes in and destroys the Dme. We have seen 9 waterlogged dmes already.
What you need to do is cut the oem cowl thin, tapering out from the centre (like the m3 cowl) and replace the rubber trim back onto it. Then use BMS filters on the cabin air intakes.
This should be further up
everyone like so Adam see's it
U can, just need to cover it the BMS filters or something similar...also I added an L shaped rubber around the edge to prevent water from coming into the engine bay & it's working fantastic 👌 easy to work on if I need now and less weight and heat too
I've have had a cowl delete for over 7 years. Never a single problem and it has seen a lot of rain and snow.
@@LOLVTECFAG there are always outliers. But the fact that I’ve seen 9 already means it’s not a once off freak accident - there is an inherent design flaw from a full delete. It takes no money and only minimal time to cut the oem cowl and remount the rubber insert. That’s the way everyone should be going over the cowl delete .
Worst DI engine for carbon build up is the Ford Eco-boost. I put a Meth kit on My little Gm EcoTec 2.0 just to help wash the backside of the intake valves and keep the IAT's cool as well.
Barra-Stang flywheel bolts need some red lock tight, good thing you caught it before it wallowed out the threads in the crank.
you could daily a lot of the cars you own but just decide to buy another one instead 😅 now thats the kind of problem i want when i grow up
Anythings a daily if you're brave enough lol
@@kylecube15 😂 I love that!
Maybe you need to balance the crank too? It's a common thing to do for engine builders here in germany.
That should create less vibrations wich also means the bearings will work better and last longer.
Hell yeah
Oh ups that was meant for the main comment section. Maybe i shouldn't comment at 2am HAHAA
Actually yes, the valves do adjust to the gunk build up. I work as calibration engineer and was involved with the valvetronic system calibration on an other bmw enigne. Like yours, it is fitted with the valvetronic system which regulates the air flow, other than using the throttle body. There are models applied in the ecu which can derive gunk build up and adjust the valve lift to a certain extent. After blast cleaning the valves, the system should be "taught", that the valves are clean again and it can practically work like it was new again.
N54's aren't valvetronic tho
I love this 335i glad it's back!
Same. He is the reason I bought my 135i N54.
@@locovaldez6943 same but e92.
Big facts. I was one of the ones bitching about it being left alone for so long 😂
@@716tg3 lol same. I live like 10 minutes from psi and my friend and I have been through all the n54 lows. When he was having all those problems with it I was screaming at the screen lol. Super easy fixed that a bmw shop shouldve known about.
Just know Adam I’ve been watching you since 70k and you’ve been the person getting me through all the tough times man, love you and your content bro
“I’m gonna get a crackle and pop tune on my a**”
Had me dying 😂😂
HAHA, what!?😂😂
Hahaha
Im happy to see you still have the 335i. After all these years. Havnt spent much time watching or on the gram about your life journey. Damn hella change. Keep up the good work. Keep up on the bmx too.
Idea: you should react to your first drift event video. Just to compare and give feedback from you 5 years ago.
Yesss
that would be sick
Good idea
Everyone like this so he can see it
Bump
Adam, literally needs a rebuild every other day for his daily race-car antics. 😂 This man will go one video. Blow shit up, then document an entire series dedicated to messing shit up. 😆
I spit monster all over the place when Mike responded with "democrats" ... uhhhh "republicans" I'm fucking dead 🤣💀😂
He wasn't wrong... lmao 🤣 🤣
Was looking for this comment 😂😂😂
😂😂😂😂
I fucking died 🤣🤣
Time ??
The N54 stock intake manifold is definitely great to take on and off and is durable for boost, however if you run Methanol it will corrode the plastic intake manifold and you'll blow a hole in the manifold. Full on Brian O'Connor danger to manifold haha
Gonna go out on a limb and say that lizard wasn’t dehydrated, it was probably just getting ready to shed.
Soo rad seeing the "O.G." 335i getting some love and be back on the channel. That's the car that basically started your RUclips automotive journey and it's also my favorite car that you own lol.
Her immediate concern for the lizard was wholesome AF.
It's important to find a gf that will take good care of ur lizard
@@skullmecca8492 bruh
Adam “What are lizard people called” Mike “democrats” Adam “no”
“Republicans” “no” 😂
Mike's right tho... 🤣
The last time I came this early, she left.
Me too man, me too... lol
Last time I seen this comment was when my dad went to the store to get smokes
You didnt need her bro.
“Its almost like shells not that actual nut”
MIKE lmfaooooo "what is the lizard people called?" "democrat." LOOOL
I actually LOL😂
mike is based af
He wasn't far off😂
Based and redpilled
That killed me hahahahhahah
Adam: goes on a rant about how strong the intake manifold is
Next video Adam: I think the intake manifold has a crack
am i the only one that notices how much he says, “a super common issue”
Well it is a BMW so he's probably correct
Yeah, it's a super common thing for him to say.
all the things he said are actually that common on n54 platform. i myself had to do all of this
The n54 is known for one thing and that’s the power the block itself can hold. Everything attached to it is garbage 🤣
A super common issue for him is not knowing anything about cars.
4:10 breaks my heart to see the throwing part. nice vid tho keep it up ;)
“He needs warmth get the heat gun” bruh you will cook the little guy Lol
Mike’s editing when the intake pops off the beat hits 🔥🔥🔥
@@nataliejj3142 Interesting comment.
What the 335i needs:
- Two Recaro Pole Position Seats
- Black BBS FI-R Alloy Wheels
Wheels
@@CadeMidgett rims are out, wheels are in! Thanks.
Needs a nice wrap
If interior needs something, it’s black headliner!
just saw this comment after mine, glad someone else said this. The the sportster is nice as well but not as aggressive.
I love the PAPA JIM reference at around 22:00 lmao. PAPA JIM is BY FARRRR the BEST youtuber without his own channel. (aka unofficial youtuber)
Adam: What are the Lizard people called?
Mike: DEMOCRATS
I'm dead
😂😂😂😂👏👏💯💯🔥🔥🔥
"Lizard-tarian" is an underrated pun but I'm here to appreciate it
Doin God's work
Also braum makes a really good red seat that matches the red interior and hugs very well
True my bro had one in his red E46
Braums aren’t up to the quality he would want. They also can break pretty easily in the eventuality of a crash
I have them in my car, so I speak from experience
@Gavin Adams wouldn’t go that far. Mine have lasted 4 years with no noticeable wear and have worked great for Autocross/track. Just saying they’re not on par with brides or recaros
@@robbymccool7213 ah i just rode in my buddy’s car who has them and i just found them comfy and secure. Didn’t think much about longevity
@@lyndon_rich there’s a reason why I still have them. Theyre mega comfy and have held up well. I just know he wouldn’t want the flex that these have
Us Mazdaspeed boys know all to well about caked up valves.
I’ve been waiting to see this comment..
Night and day difference after they’re cleaned. Worth it.
That camera work at 6:40!!! It's the DIVINE difference.
“She’s a lizbean” 😂
Getting those Danny Duncan vibes
“Burummburummm burum”
Was looking for this comment lol
@@christopherwarnecke4858 same 🤣🤣
Faaaaaaaaaacts
Glad to see you posting more 335 content, i wish I still had mine. I crashed it 5 days ago cause someone turned right in front of me while I was going through a green light😢
Instructions Unclear : My ford focus now has 6 cylinders and a big single...
I'd be happy with that upgrade lol
A billet valve cover would also help with the N54 valves they block off the oil ports so no more oil on top of your valves!!! Check out performance boutique Canadian company and a buddy of mine he makes them they are beautiful👍🏼
"is it really lizartarion?" wtf lmaooooo
Dude adam giving Collette the lizard was 10/10 🤣 🤣 🤣 and conversation and content after... is hilarious
Ready for the small rear brake conversion to run 15’s and et’s. Or maybe a doc race Intake manifold.
“You got that basic DNA” 😂😂
SHEESH
Red Recaro Pole Positions are the seats you need for your 335i
I swapped over to the M3 cowls and am quite happy about it. Gives you more room to access the engine, cuts weight and continues to provide water abatement
"she's a lesbian" lmfao xDD
🤦♂️ no way 121 people didn’t get the joke
" I'm concerned if I swallow these.... i might get a crackle and pop tune on my a****** " I died 🤣🤣🤣🤣🤣
anyone else was just kinda sitting on youtube not watching anything but then the notification comes so you click it
Always 😂😂💪🏼
I was watching chiropractor vids with loud joint cracking in them
@@johanneswarn5488 lol
@@johanneswarn5488 asmr?
@@GiraffeMoFo look up Joseph Cipriano, he does vids of the adjustments he does on people. ASMR for real when he does his thing lol
All i can say is atleast you still have the original car that kick started this channel into what it is 👍 keep up the builds like that killer r32 and the barra mustang and of course the cream og 🤙 what an adventure i remember the skate ramp getting built..
25:20 bout blew my mind!!
Sammeeee
huh
@@mtb.7848 do it watch it blows ur mind
Son of a ...
atomic performance crank dowel kit for the barra should help
335 vs skyline both with 17” ET Street R so there’s no traction issues on either end & it’s an even race! 😏
His 335 is an i, not xi, so the skyline still has the AWD advantage.. I didnt know the 35 was singled and idk the mods on the r34.
@@mavsformulaful we’re talking about the white skyline which is also rwd & big single 👌
Skyline vs 335i needs to happen now. You should time each of your cars around a certain track or just roll race them all to see where they all stack up
16:05 “get the heat gun” 💀💀💀💀
Loving the 335i content! I want to see the rs6 vs skyline vs 335i would be a awesome race, and if you want to change something on the car you should definitely consider making a custom LZMFG wrap to the car
"what are the lizard people called" "democrats?" killed me XD
Bahaha I was just about to quote that
@@micahdornbusch3555 that shit made me laugh for a solid like 15 minutes
My heart melts seeing the 335i back ❤
What are lizard people called?
DEMOCRATS
XD
No they’re Lizbians
Looks like your back is finally feeling better. Good to see. The car is ripping :).
I feel like there's gotta be a company that could relip the lm's so that you could fit a decent tire
I've commented this on your videos before regarding loose nuts and bolts, but I'll post it again and hope that one day you see it. Use locking wire! Drill a tiny hole through the edge of the bolt heads, run locking wire through them all, and they should never ever come loose.
22:02 shout out papa Jim
Adam's sigh at 16:26. Realizing he has to now play with his own wallnuts
“I don’t vape enough for this dude”
The chill in this video is A-1.
He should put in red bride seats like his S13
Lizzardtarian... Is that! No. Smh.. He saved him that's was funny asl!!😂😂😂
So like is Adam’s mom just Ubering everywhere now or what?
That's just her toy, she still has a daily from what I gathered
Its her gotothebeach-car... Ubering to the beach is also pretty nice
😃
I think she has a Chevy Silverado
Did this last summer. Designed and 3D printed my own adapter using Ender 3. Worked great.
Dannng I feel like I may have to do this to my new VW flip. These 1.8t are know for gunk and sludge.
1.8ts aren't known for gunk or sludge. The 2.0TFSI that have been used in 04 onwards are known for all sorts of gunk and carbon build up because they're direct injection.
@@shona5512 oh do you own both? I could use some help. This is my 3rd 1.8t with gunk issue.
@@BrokePremiere not sure if they have EGR but it could be related to that
Broke Premiere - Flipping Cars it’s from people not running around Full syn. :(
@@moejasss they have a Kombi valve. Similar but a little different. It’s definitely evap related though.
Adam is a good dude he helped me work on my evo back in the day
Drill and safety wire your bolts.
On a flywheel? Im not quite sure that would work. I could be wrong though.
Nah he needs to weld them
🤣🤣11:25 this had me rolling man. Hahahaha I'm dead. 🤣🤣
14:56 omg adam. Your killing me. Roflmao 🤣
can you do a begginer friendly drifitng video showing the basics, what to do with the wheel and showing the footwork while drifting?
I’d love to see the rear seats come out, nice half cage in there and a matching set of seats up front, maybe an aftermarket steering wheel to
You know you're south african when you get excited about someone mentioning south africa lmao
Ayyy whatsup lighty, how is it going ekse😂
Awe bra
12:38 the walnut contains a oil which makes it the superior, yet odd, media. Whereas sand is dry. Subsequently, etching is a byproduct of said particular media unlike walnut.
anyone eles notice his moms car is back... ooh no lol
He should have left it with the turbo on it. She liked it.
It never went back.
I love the 335i content more than anything!
You should stage a bracket race with all your cars to find the fastest one! Just don’t do it on a prepped track so you don’t break axles 😅
Good thing you caught that clutch then. I seen that same problem destroy the end of a crank.
Like how Adam took Collette a lizard and She went DIRECTLY to MOM mode And sorted the little guy out
,then when RIGHT back to the vette and wrenching without looking back!
I joined this channel because of that 335i and your inspiration to obtain it. Maybe some new wheels, i love the TE idea. Also try to get the car completely dialed so it can go up against the R34 when its done. Now that would be a badass race. N54 vs Rb26
Drink every time mike says “yeah”
I worked on aircraft for a while. We used safety wire bolts on almost every important part. You all should look into those for the flywheel bolts. It’ll stop them from backing out. Y’all should take a look into it
3:10 hold on whats that in the background
his mums pontiac
@@joshperkins6900 thought so aswell
Stoked that the 335i content is back
Gald to be seeing more of the bmw, even though is is mostly problems.
@Dennis Moroz defenitely bmw problems
I love all the 335 content recently
Anyone remember when adam drifted his 335i
"Adam I purchased my moms ls swapped solstice" lol Great content regardless, Thank you keep it up!
Is this why my Barra is leaking in between engine and gearbox
That sounds like a main seal
Aye I think the single seat adds character. Keep it
I could never comfortably stack my cars at my house like that. Not that I'm worried my cars would fall on eachother, it's that i own a shitbox e36 and i would come back the next day and the car underneath would be soaked in oil
I don't think Adam has them
But I know there a tray you can put in place for that
I left for awhile because the content felt the same but I'm glad I've resubscribed and I'm loving the content
I’m not completely sure because of the quality of the picture but that lizard was a Cuban brown anole it is invasive in Florida and you would actually be potential helping the native species by killing colette’s brethren !!! :)
Locktite on the flywheel bolts i think is wise, some say torqueing them is enough. idk. Love that 335i Big Up!
Who forgot the lock tight on the flywheel bolts?
Also if they were lock tighted just tack weld them in place
Wouldnt that unbalance the flywheel?
@@ishaanmann5856 equal sized tacks in the same place on each bolt, no
I've seen it done on at least 6 baras, and I don't commonly look at baras or even work on them, just a think that people do because it's cheap insurance
@@John.strong Good to know!
Idea for the 335i - Interior Upgrade!
-replace headliner and pillar covers with charcoal black
-replace seats with custom red leather Recaro's to match interior
-replace fake wood trim with carbon
🤩🤩🤩
Why is your mum's car still in your shop, doesn't she like it?
Probably
He said it needs a full shakedown still. He said it's easy to throw a swap in there in a few days, but takes a bit longer to get it full dialed where he knows she can drive it to the beach and home with zero problems
Adam's intension was good but sadly its not mom's peace of bread so I think She was way happier when he did Turbo fit, Would be much better if He try to buy him comfortable vehicle instead from now on.
I died when they laught at Adam thinking about swallowing the nut 🤣
Needs a M sport from bumper with a carbon lip and interior of the beige roof needs to be black/Alcantara
I’ve seen been a fan ever since he started RUclips I seen everything come up and down this guy is who I look up to he has showed me love in cars I remember when he only had the 240 and the bmw