Handbrake Switch and Lever Removal - Nissan Micra K12
HTML-код
- Опубликовано: 15 окт 2024
- How to remove and replace the handbrake warning light switch and the handbrake lever (parking brake lever) on a 2003 to 2010 Nissan Micra K12. When you refit the lever you may need to re-adjust the handbrake. There should be no more than 11 to 12 clicks of the ratchet as you lift the handbrake lever. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2023
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Good Job 👌
Today I worked on my Micra again. Took a lot of time to loosen a screw that was stuck. After about two hours of fighting, she lost.💥
I say hello to everyone who struggles with things like this. Just keep calm.
Good advice :)
😊😊😊😊1a😊😊
Another excellent tutorial video as always. Much appreciated.
Thanks again :)
@@screwsnutsandbolts After watching this video I removed the centre console on our Nissan Micra to get to the handbrake unit. The handbrake had been squeaking and also needed adjusting. All sorted now. Took minutes to do. There was a bonus... I found a £1 coin!
We have the n-tec version so the centre console is fastened either side under the dashboard with plastic rivets and has a usb / aux in socket to unplug. Still, so easy to remove.
LOL I only found about 17 cents when I removed this one. You did well !
My daihatsu sirion 2007 handbrake button is broken,how can I replace only the button. Please help me ,I don't have money to buy new handbrake
I haven't worked on a Diahatsu so I don't know, sorry