Hi there on XK Loader 3 when i plug it to the OBD in the car it say to hook up 12V to the alarm What do they mean by that or basically to use the XK3 loader to configure an alarm plug-in it to the vehicle what is the steps that I have to take
Hi. The XKL3 in Bitwriter Mode will work just the same as the Bitwriter itself. The alarm should be installed and powered up - also ale least one remote should be programmed on. Cheers!
@@OvidiuCuiesdean Thank you for the quick response. I was discouraged from going to a directed dealer because I was under the understanding that they won't sell it to me unless I'm authorized.
@@OvidiuCuiesdeanI already programmed the dall3 but it asks me to connect again to make key 2go and I do not have option in the cellullar when I reconnect the dball3 and it does not turn on the silverhed cehvrolet truck 2017
Hmm, or the first part of the programming was done improperly (proceed with hard reset and go again to program the DBALL), or your diectechs account do not have enough privileges to do key2go procedure. In that case talk with your Directed representative. Thank you.
Do you need a account or password to use this as a bitwriter? I don't need to flash firmware, just change settings.
I have a older clifford. Matrix 1 alarm is that compatible
Salut, unde te pot gasi pentru a imi face si mie cateva modificari ? Multumesc
Salut, scrie-mi te rog pe suport-tehnic@falcon.ro și rezolvăm.
Salut, modulul dball 2 ramane la alarma? El face legatura intre can-ul masini si alarma ?
Salut, da, DBALL este o interfata intre alarma si masina (CAN-uil masinii).
Is the ckloader the same thing as the 998t Bitwriter and can it be used on viper alarms
No, is not the same thing. It is much more: Bitwriter, D2D logger, CAN Logger, firmware loader for Directed units, etc.
Hi there on XK Loader 3 when i plug it to the OBD in the car it say to hook up 12V to the alarm What do they mean by that or basically to use the XK3 loader to configure an alarm plug-in it to the vehicle what is the steps that I have to take
Hi. The XKL3 in Bitwriter Mode will work just the same as the Bitwriter itself.
The alarm should be installed and powered up - also ale least one remote should be programmed on.
Cheers!
Do you need a account or password to use this software?
Ovidiu Cuiesdean
😊
will this fit any viper alarm (5806v) and a vehicle without an OBD ?
For sure! The OBD port, in this case, s used only to power up the XKL3.
Does this require an account through DEI to use? I have mine programmed already I just need to change runtime settings
Does this work with viper?
Yes, that's a Viper brain you see in the video. Cheers!
Where can I buy the XKLoader3?
You should be able to buy it from any Directed dealer.
@@OvidiuCuiesdean Thank you for the quick response.
I was discouraged from going to a directed dealer because I was under the understanding that they won't sell it to me unless I'm authorized.
@@hackervirus56 I don't know if they'll sell you one or not, but I think you cannot find the XKL3 anywhere else..
This will work on a Python 5309P?
Are you sure that your alarm code is 5309? Anyway, as long as the Python got a Bitwriter port, for sure!
@@OvidiuCuiesdean You're correct - It was Python 5305P
@@mjminino The XKL3 will work on your alarm.
how key2go works
Hi. This a key cloning procedure.
Cheers!
@@OvidiuCuiesdeanI already programmed the dall3 but it asks me to connect again to make key 2go and I do not have option in the cellullar when I reconnect the dball3 and it does not turn on the silverhed cehvrolet truck 2017
Hmm, or the first part of the programming was done improperly (proceed with hard reset and go again to program the DBALL), or your diectechs account do not have enough privileges to do key2go procedure. In that case talk with your Directed representative.
Thank you.