Working on your Jeep or building your boat, it's always very interesting to watch your videos and see how creative you are and working precisely !! Congrats. Herve from France.
Awesome to see how much more confident and thorough you are in your videos now vs when you started! Keep up the great videos! Excited to see this one on the water!!
Need a footrail for the stools, they're a bit high and the peeps will appreciate them. If the bubbles bother you drill a tiny hole and fill with a hypo needle. I don't think painting the seat posts is a big deal, by the time the fence is they won't be as noticeable. And painted they may become a pain with feet rubbing on them, etc. A nice sized LiFePO4 battery bank would be nice, check out jag35 and battery hookup. Being able to runs lights, tunes and maybe even a few small fans for hours w/o toting a ton of lead around is nice. Looks great!
Would it not have been possible/potentially more unique to burn an emblem into the butcherblock using a stencil of sorts and black powder? Doing it before epoxy would leave a very nice custom look. Something I've seen people try and always thought it'd be cool to incorporate into a boat build. Love your videos, man. Keep them coming!
You need to buy one of those blow up paint booths for a clean space they use the fan blower that they use for those jump houses. definitely check them out if you haven't and I believe they are pretty affordable.
I'm guessing that the butcher block was still fairly green wood if they made it for you. Would it make sense now to sand it right down and live with it raw until it dries out a bit in the weather for a season then sand and redo all the fancy paint and epoxy? Not my area but bubbling wood just seems like it's too new.
Awesome videos, love to see what direction you take things during your builds. Question where did you get that steering wheel for the helm? Love that ..keep up the good work.
What would you think about mounting the voltage gage to the front console door? This would be out of the way, but the door is where you would go to first to service or check on the batteries. Then you could mount the fuel gage in front of the driver.
With as much epoxy you have on there, you would be well off taking a block sander and blockiung the top of that table flat. Then just grab some cutting compound and buff it after. will make an incredibly flat and smooth finish. Espacially seeing as you have a month or more to make it right.
I know the rough edges are covered when the cupholder inserts are inserted but.. You should really invest in a cup holder size hole saw for this purpose especially if you mean to do more of these for-profit builds in the future.
Are you going to attach drain tubes to the cup holders for the Captain that lead out of the console? It looks like it has fittings for them, and otherwise liquids might end up on your electronics.
Can I suggest you put the handles that adjust bar stool height in the same direction in relation to the boat vs in relation to the seat. For instance, have all the handles point to the back of the boat, instead of on the right side of the seat for all of them.
You find a pedestal for the cap chair? I’ve been looking for one that will sit up like a bar top but can’t really find anything like what you’re talking about
Nothing says "Hey PoPo over here like the name of ur boat, good luck pal. Take it from an ex boater who dealt with the water cops, all's they want is that pretty green cash. Here comes the Judge would be a better name lol
The Bubbles are from the moisture, that is trapped in the wood. You should not have sealed it completely. It might be worth a try, if you remove the epoxy from the surface, that is hidden inside the cabinet anyways.
Love pretty much all your work, but the name and logo are pretty cringe IMO. I get being young and excited about drinking and fun, but there are a million much classier things you could have done.
Looks awesome! I think you need a foot rail around the bar for your guests.
Working on your Jeep or building your boat, it's always very interesting to watch your videos and see how creative you are and working precisely !! Congrats. Herve from France.
Excellent name for a party boat. Nice design, well executed.
I admire how your visions become reality. Really creative.
Awesome to see how much more confident and thorough you are in your videos now vs when you started! Keep up the great videos! Excited to see this one on the water!!
Always nice to see a project coming along well.Thanks for sharing and taking us along
Hi Zach, it looks awesome! Don´t worry about the bubbles. I agree with you about painting the seat feet in black 😉👍
Wow, great job Zach! I'd think it is a custom ordered high end boat if i saw it around!
It reminds me of those Dos Equis commercials. I don't always drink beer when I am on a boat, but when I do it's on one that Ultimate Rebuilds bult.
This build is going to be incredible when it's done. It's a great start so far.
Fantastic! Can't wait to see the finished boat.
It’s so inspiring to see. It makes me want to build my own pontoon sometime. Love the bar setup!
What a cool looking boat. Nice job.
As always, Zach, you are killing it for a young guy. You are very talented. Keep up the good work and awesome content.
WOW, you're getting really good at this. Keep it up.
Zach, if you like it and it turned out like you like you want it that's all that matters
I think it looks great
The name is fantastic Zach, I can already feel this will be the best one yet.
Yes! Thank you for changing the A to an O. That was bothering me too lol
Looking good Zach! I'd prob just add the fuel gauge down by the speakers on the lower part of the helm...
Looking good so far
Add some vertical curved brass rails to the front of the bar, like you see for a waitress station at a real bar!! That would be unique! DO it NOW! 🙃
You build amazing stuff.. great job yet again
Need a footrail for the stools, they're a bit high and the peeps will appreciate them.
If the bubbles bother you drill a tiny hole and fill with a hypo needle.
I don't think painting the seat posts is a big deal, by the time the fence is they won't be as noticeable. And painted they may become a pain with feet rubbing on them, etc.
A nice sized LiFePO4 battery bank would be nice, check out jag35 and battery hookup. Being able to runs lights, tunes and maybe even a few small fans for hours w/o toting a ton of lead around is nice.
Looks great!
What material for the rails? Brass?
Looks awesome, you are a very creative person, keep it up, love the videos
Would it not have been possible/potentially more unique to burn an emblem into the butcherblock using a stencil of sorts and black powder? Doing it before epoxy would leave a very nice custom look. Something I've seen people try and always thought it'd be cool to incorporate into a boat build. Love your videos, man. Keep them coming!
looking sharp!
Love everything about it, keep up the good work!
Water patrol is going to love the name on that boat😮
You need to buy one of those blow up paint booths for a clean space they use the fan blower that they use for those jump houses. definitely check them out if you haven't and I believe they are pretty affordable.
Im really liking this. How about foot rests around the bar
You know it's a party boat when the captain has 4 drink holders🎉
The boat is looking awesome. You're a multi talented man. One thing I would have done is face the logo toward the controls so you can read it.
Love the BisforBuild reference in the title - yes you were doing this way way first.
Your bubbles makes it sparkling vine
I'd definitely recommend keeping the volt gauge. Useful for running the radio or such while the engine is off without risking draining the batteries.
Ya, mount it to the front console door.
For the holes you should use uv resin to fill and dry it with uv light in seconds.
Sick build!
That looks amazing!!!
Mi gee you remind me of Xzibit the way you pimp these jawns. The work be incredible ya heard?
Great job! Are you putting a foot rest around the bar? That would be a nice touch.
Yes! Definitely will need a footrest
Ya, maybe brass? that would be awesome!
Turned out great!
super nice
You could sand down the epoxy top (just to smooth out the epoxy, not sand all the way through) then do another layer or just do an oil finish over it.
I'm guessing that the butcher block was still fairly green wood if they made it for you. Would it make sense now to sand it right down and live with it raw until it dries out a bit in the weather for a season then sand and redo all the fancy paint and epoxy? Not my area but bubbling wood just seems like it's too new.
You got mad skills man.
Also i hope all your friends subscribe and watch the videos.
Perhaps @Aquaholic needs to tour Aqua-Holic once it's finished. 😁
Great job!
looking good!
I love the boat builds!
Nice...
Love the vids, keep em coming
Make a shuffleboard game out of the leftover butcher block circles!
Stool color looks fine. Black might standout too much.
Man i think its time for a garage door bug mesh lol
Awesome videos, love to see what direction you take things during your builds. Question where did you get that steering wheel for the helm? Love that ..keep up the good work.
Maybe match the stool to the seat color. Black attracts heat.
What would you think about mounting the voltage gage to the front console door? This would be out of the way, but the door is where you would go to first to service or check on the batteries.
Then you could mount the fuel gage in front of the driver.
Here you go
With as much epoxy you have on there, you would be well off taking a block sander and blockiung the top of that table flat. Then just grab some cutting compound and buff it after. will make an incredibly flat and smooth finish. Espacially seeing as you have a month or more to make it right.
I know the rough edges are covered when the cupholder inserts are inserted but.. You should really invest in a cup holder size hole saw for this purpose especially if you mean to do more of these for-profit builds in the future.
Are you going to attach drain tubes to the cup holders for the Captain that lead out of the console? It looks like it has fittings for them, and otherwise liquids might end up on your electronics.
I like the name! It is a worthy addition to the Red Neck Yacht Club.
Put foam around the door. The subs will rattle it like crazy
Should have been AQUA-HAULIC !
Can I suggest you put the handles that adjust bar stool height in the same direction in relation to the boat vs in relation to the seat. For instance, have all the handles point to the back of the boat, instead of on the right side of the seat for all of them.
You find a pedestal for the cap chair? I’ve been looking for one that will sit up like a bar top but can’t really find anything like what you’re talking about
That bar/helm is awesome!!! Can you build me a pontoon boat? Or maybe sell me this one?
Hey where do I get a wrap for my jet sky. I saw your jet skit build and you got a very nice wrap for it
Zach, can you advise where you got your steering wheel? Love it. Would love to swap out my pontoon boat wheel with that one...
Nothing says "Hey PoPo over here like the name of ur boat, good luck pal. Take it from an ex boater who dealt with the water cops, all's they want is that pretty green cash. Here comes the Judge would be a better name lol
yeeeeee
You should do an RV build where you say this is my dash/bar lol jk
🤝
Use USHIP for delivery
Dont forget the foot rests
SUPER COOL.
DO A RV
Ya
When are you building a tiny crib on a pontoon
A 3rd wheel rv
Is there enough margin to make commissioned boats?
Paint the stools
Where is he getting stencil?
Probably don't want to have the shop fan going while you're pouring epoxy.
You needed to seal the wood first before you painted on the logo.
Dont get me wrong I like the logo…
But AQUAHOLIC is a YT channel 🤣
The Bubbles are from the moisture, that is trapped in the wood. You should not have sealed it completely. It might be worth a try, if you remove the epoxy from the surface, that is hidden inside the cabinet anyways.
Will the real aquaholic please stand up!?!
AquahAlic
No offense but Aqua-hullic would of been better lol
Another music montage....... yay 😕
Expecially? 🤨
Add LED lights that blink to the beat of the music.
Imagine a Karen who smoked 2 packs of Newports for 20 years, quits and 6 months later hates smokers. That’s you with your alcohol comments. Projection
It hurts me that he spelled auqaholic incorrectly 😢
Nvm he fixed it lol
He fixed his, but yours is still spelled wrong
Build a camper
Love pretty much all your work, but the name and logo are pretty cringe IMO. I get being young and excited about drinking and fun, but there are a million much classier things you could have done.
Sound old
Aqua-holic means addicted to water. Get over yourself. You’re making us older folk look bad.
Okay boomer
Apparently you missed The Mullet. That is typical for this channel and I think it is part of the charm.
@Gramps83 cheugy.. it’s giving boomer
Perfect time to put a round 🛟 thing for the "O"!??
@AQUAHOLIC
It's really looking great !!!!!