Great video hopefully this video will dispel all of the nonsense about soft Chinese cam cores causing failures bought comp flat tappet last year every lifter was flat out of the box little or no crown bought one of your flat tappet grinds and a set of lifters flawless still running strong 4 years later
You're correct about spreading information . For me , it might not be vital , but I still like to know . As I type , someone else is posting a video about soft , offshore lifters . Getting real info is difficult because people want to sell their product....not inform the public . These videos , I'm sure , do both for Powell . Informed customers are the best customers . Keep it up , appreciate the effort .
Thank s Daniel and Andrew great job by both of you guys. Love the channel, you are a pleasure to learn from. I hope you’re making great money because your content is priceless.
The reason your doing well is because you take the time to talk to people and help them. Just as you did with me and my 460 which is going on my Kit car/ Replica Cobra. BTW Summit swapped out the SCJ-B heads #625 on the nose at 700, for SCA-A heads #365 ish on the nose at 600. Need to find some customers then I'll give you a call about a cam. Thanks Dan
What an excellent video through and through! Thanks for pointing me over to this I hadn't seen it and it answered a question that I've had for years! 👍
@@powellmachineinc3179 Subbed and shared already! A few of my gear head friends and I had been discussing this. So they've all been tagged and linked to your channel! Thanks again! :)
The endurance guys told me to avoid dlc. Just a tiny bit comes off and there goes the whole motor. Cuts right through oil filter if your even lucky it does go through bypass valve. The absolute hardest sharpest material in the entire engine in a coating seams risky.
I wish you would do a video explaining all these terms. Bay circle, LSA, Duration, Lift, etc and show us what they mean and why they are what they are...
Another informative video. It would be interesting to see a vid on the cam grinder, and how you actually set your machine up to grind cams. Edit, I’m a numpty! Missed the previous two vids!
A few years ago I bought 40+ new in box V-8 cams from Gearte Racing Engines in Indian when they went out of business. They did a lot of sprint engines. I haven't looked at all of them but it seems a lot of them have full round lobes. some are in 5 packs with other parts in them that I don't understand. Where would be a good place to sell the whole lot at a fair price. I have no use for them but I don't want to give them away.
Thank you for the response. I will send you some pictures and if you are still interested I could inventory them. I'm building a 1000HP 6-71 blown nitrous I6 Chevy 292 for drag and drive in my 53 Chevy pickup. I need a billet cam for it with my Ryan Falconer V-12 head.
You just recomended an s7 tool steel for a blank to be machined by me. You didnot mention that here. I see that it comes anealed and can heat treat to rc55 so I assume it will need heat treated before grinding. I guess you send them off for that.
We do all customs from s7, we do top fuel and pro stock from s7 also, it can be 60 rockwell but we have to rough in the round lobe then heat treat, after heat treat the mains are ground then the lobes are ground.
It's all in the ramp going into the opening the valves against the pressure the slow are you can make it open up the faster you'll get the exhaust fumes out of the combustion chamber And you won't Tara valvetrain parts because you're not trying to force them open in the porch rocker arm don't have to be so heavy that it can withstand 2000 PSI of pressure
Question? I'm working on a LS Chevy motor NAMELY A LATE MODEL STOVE BOLT 235 Chevy 1962 year. Ya I know I've taken a lot of gruff about it so be it, my project not theirs. Looking for a flat tappet solid lifter cam and lifters. With all the cam theories and cam goo-rues out there along with all the failure problems. Almost might be easier to figure out a Koenigsegg free valve system, that would allow all kinds of valve setting etc. and further aggravate the put a LS motor crowd in it. Any thoughts on what you may have to offer? Thanks FRED.
❤😊The cam tappets or hemie s were wearing and problem s so I bought a 5.3 2015 get time get a new rig looking at the 3/4 ton dodge 6.4 or the Godzilla 7.3 on 5'7 hemie utility hemies such as cop cars city trucks that idle alot the oil pumps had low volume they had good pressure at higher idels that's might had been the problem s for cams and tape wear on the high idle hours on the hemies to remedy this problem s some forms dodge mechanic s go to the 6'4 oil pump for the 5;7 hemies everything I've read the 6'4 is good all round engine towing hope there good as that ol 2003 Chevy with that 8.1 Allison tranny 2500 that was good truck I wore it out ok just started watch youal😊
With a 5160 induction hardened SFT using DLC coated lifters do you need to break in with low spring force or can you go to its running setup - as per roller lifters- ? Appreciate your thoughts
All the steel cores were roller, the very first core was the only flat tappet in the bunch. If you had a billet flat tappet, the break-in wouldn't be nearly as critical
I hope you can answer my Question I ordered a ls camshaft from Michigan Motorsports when I received the my kit it was in a box with red line camshaft’s is this company legit are the camshafts any good ( note) it has a Elgin part number 1840 stage 2 sloppy mechanics please I would appreciate your input on the matter
I am rebuilding my 1958 chevy Bel Air with a 283 cid and Powerglide trans. I am afraid that I will make a bad choice of cam and/or lifters due to lack of knowledge and wipe out a cam and ruin all my hard work. I want to stay with flat tappet setup. What cam core should I make sure my new cam has and what lifter set do I look for to match? It's too late in life to do this rebuild again. Thank-you.
Old motor homes…can’t live with ‘em, can’t dispose of ‘em. They are the old soldier that never dies, just fades away. Dismembered my 20 ft camper trailer this summer for the frame. 20 hrs to recycle and a huge dirty fire to burn away the wood remnants…never doing that again. Wrecking yards and recyclers won’t take them because of the bulk of it is wood waste and is a huge mess to dismember.
@@powellmachineinc3179 Thanks I saw a video of a designer grinder guy that said the heat treat on the. Cores gets mostly removed when then grind the cams so they reheat treat them. So maybe it’s just hype.
How is the taper ground in the lobe on a non roller cam. Is the wheel dressed on a angle. If so then a roller cam would take a square dressing. ???? Thanks.
2 ways, for taper some machines actually dress the wheel at a angle and some the actual head pivots so you can set the angle, so flat no taper for rollers.
I wonder if u can do a video on the subject of taper. I heard that some cams have too much , some not enough, some have taper in one direction, some in two directions, some like nail head Buick’s have none. ??? Also I have a garage and machine shop in Fayetteville NC. We got some studebaker cams. Can you regrind them for us ?
Great video hopefully this video will dispel all of the nonsense about soft Chinese cam cores causing failures bought comp flat tappet last year every lifter was flat out of the box little or no crown bought one of your flat tappet grinds and a set of lifters flawless still running strong 4 years later
Thank you!! And glad to hear you had good success!
You're correct about spreading information . For me , it might not be vital , but I still like to know . As I type , someone else is posting a video about soft , offshore lifters . Getting real info is difficult because people want to sell their product....not inform the public . These videos , I'm sure , do both for Powell . Informed customers are the best customers . Keep it up , appreciate the effort .
Absolutely!, you're welcome
Thank s Daniel and Andrew great job by both of you guys. Love the channel, you are a pleasure to learn from. I hope you’re making great money because your content is priceless.
The reason your doing well is because you take the time to talk to people and help them. Just as you did with me and my 460 which is going on my Kit car/ Replica Cobra.
BTW Summit swapped out the SCJ-B heads #625 on the nose at 700, for SCA-A heads #365 ish on the nose at 600. Need to find some customers then I'll give you a call about a cam. Thanks Dan
AWSOME! Thank you
Good morning Daniel.
Great video.
The information is very good.
Thanks for sharing.
Take care, Ed.
Thank you Ed!!
Another fantastic video
Thanks for explaining about the topic. Always wondered why my new roller was the Copper colour!
You're welcome!
What an excellent video through and through! Thanks for pointing me over to this I hadn't seen it and it answered a
question that I've had for years! 👍
Yw, share it , it helps our channel
@@powellmachineinc3179 Subbed and shared already! A few of my gear head friends and I had been discussing this. So they've all been tagged and linked to your channel! Thanks again! :)
Awesome!!
Great video! Thanks for the information 👍
What a great video. Thanks for putting it together.
Glad to do it!
Very informative.
Would love to see a in depth breakdown of your flat tappet lifters versus the other guys. Thanks!
Noted!
The endurance guys told me to avoid dlc. Just a tiny bit comes off and there goes the whole motor. Cuts right through oil filter if your even lucky it does go through bypass valve. The absolute hardest sharpest material in the entire engine in a coating seams risky.
I could see that.
I wish you would do a video explaining all these terms. Bay circle, LSA, Duration, Lift, etc and show us what they mean and why they are what they are...
Noted
Another informative video. It would be interesting to see a vid on the cam grinder, and how you actually set your machine up to grind cams.
Edit, I’m a numpty! Missed the previous two vids!
The video before this one is exactly that.
@@johnwilburn damn, looks like i somehow unsubscribed from notifications! The good news is I now have two videos to watch!!!! Cheers
Excellent info! Thank you for the lesson!
Glad it was helpful!
A few years ago I bought 40+ new in box V-8 cams from Gearte Racing Engines in Indian when they went out of business. They did a lot of sprint engines. I haven't looked at all of them but it seems a lot of them have full round lobes. some are in 5 packs with other parts in them that I don't understand. Where would be a good place to sell the whole lot at a fair price. I have no use for them but I don't want to give them away.
I would be interested, email me @ powellmachineinc@gmail.com
Thank you for the response. I will send you some pictures and if you are still interested I could inventory them. I'm building a 1000HP 6-71 blown nitrous I6 Chevy 292 for drag and drive in my 53 Chevy pickup. I need a billet cam for it with my Ryan Falconer V-12 head.
@@lazyhoundracing9621 I could probably help
great info.
Glad it was helpful!
Another awesome video! Great news about the Buick cores. Are you planning any 55mm?
Once we get them running, journal size will be available in any size you would like.
Awsome video, thanks.
Glad you liked it!
Another fantastic video, thank you Daniel! I don't suppose you can grind a cam for my Corvair? :) That DLC lifter coating really looks promising.
We aren't doing flat tappet cams anymore, thank you for the support!!
Great information.
Glad it was helpful!
You just recomended an s7 tool steel for a blank to be machined by me. You didnot mention that here. I see that it comes anealed and can heat treat to rc55 so I assume it will need heat treated before grinding. I guess you send them off for that.
We do all customs from s7, we do top fuel and pro stock from s7 also, it can be 60 rockwell but we have to rough in the round lobe then heat treat, after heat treat the mains are ground then the lobes are ground.
It's all in the ramp going into the opening the valves against the pressure the slow are you can make it open up the faster you'll get the exhaust fumes out of the combustion chamber
And you won't Tara valvetrain parts because you're not trying to force them open in the porch rocker arm don't have to be so heavy that it can withstand 2000 PSI of pressure
Reading that made my head hurt.
Question? I'm working on a LS Chevy motor NAMELY A LATE MODEL STOVE BOLT 235 Chevy 1962 year. Ya I know I've taken a lot of gruff about it so be it, my project not theirs. Looking for a flat tappet solid lifter cam and lifters. With all the cam theories and cam goo-rues out there along with all the failure problems. Almost might be easier to figure out a Koenigsegg free valve system, that would allow all kinds of valve setting etc. and further aggravate the put a LS motor crowd in it. Any thoughts on what you may have to offer? Thanks FRED.
Email me, maybe I can do something, powellmachineinc@gmail.com
❤😊The cam tappets or hemie s were wearing and problem s so I bought a 5.3 2015 get time get a new rig looking at the 3/4 ton dodge 6.4 or the Godzilla 7.3 on 5'7 hemie utility hemies such as cop cars city trucks that idle alot the oil pumps had low volume they had good pressure at higher idels that's might had been the problem s for cams and tape wear on the high idle hours on the hemies to remedy this problem s some forms dodge mechanic s go to the 6'4 oil pump for the 5;7 hemies everything I've read the 6'4 is good all round engine towing hope there good as that ol 2003 Chevy with that 8.1 Allison tranny 2500 that was good truck I wore it out ok just started watch youal😊
Great video and following from Australia. 🇦🇺
Am I able to order parts and have them shipped to Australia? Thanks
Yes, we just shipped a cam kit to Australia, ty for subscribing!!
So you're strictly GM and Ford. I'll still watch. I'm a Mopar enthusiast 😊
No we do tons of mopar, did a 340 solid roller today
With a 5160 induction hardened SFT using DLC coated lifters do you need to break in with low spring force or
can you go to its running setup - as per roller lifters- ?
Appreciate your thoughts
All the steel cores were roller, the very first core was the only flat tappet in the bunch. If you had a billet flat tappet, the break-in wouldn't be nearly as critical
Thanks much 😄
I hope you can answer my Question I ordered a ls camshaft from Michigan Motorsports when I received the my kit it was in a box with red line camshaft’s is this company legit are the camshafts any good ( note) it has a Elgin part number 1840 stage 2 sloppy mechanics please I would appreciate your input on the matter
Hello
What Buick cores?
Stg 2 V6 ?
I am rebuilding my 1958 chevy Bel Air with a 283 cid and Powerglide trans. I am afraid that I will make a bad choice of cam and/or lifters due to lack of knowledge and wipe out a cam and ruin all my hard work. I want to stay with flat tappet setup. What cam core should I make sure my new cam has and what lifter set do I look for to match? It's too late in life to do this rebuild again. Thank-you.
Go roller, no worries then
Can you build a tame solid flat tappet cam? Everything I see is really aggressive.
We don't grind flat tappet cams any longer.
@@powellmachineinc3179 Damn everyone hates flat tappet cams.
Old motor homes…can’t live with ‘em, can’t dispose of ‘em. They are the old soldier that never dies, just fades away.
Dismembered my 20 ft camper trailer this summer for the frame. 20 hrs to recycle and a huge dirty fire to burn away the wood remnants…never doing that again. Wrecking yards and recyclers won’t take them because of the bulk of it is wood waste and is a huge mess to dismember.
I'm confused, what do old campers have to do with camshaft cores??
Does anyone make a good core for the old Toyota 22R engines? I know they're not race engines but I like'em anyway
Yes, camshaft machine makes cores, we have them in stock
@@powellmachineinc3179 Praise the Lord!
Can they be heat treated again after they are done being ground?
No, 2 reason, #1 there is no need , #2 heat-treated will distort the shaft and it will need grinding again.
@@powellmachineinc3179 Thanks I saw a video of a designer grinder guy that said the heat treat on the. Cores gets mostly removed when then grind the cams so they reheat treat them. So maybe it’s just hype.
@Puppy Gadget yeah, he is 110% wrong, obviously he doesn't know anything at all about manufacturing camshafts.....
@@powellmachineinc3179 Yes
Thank u sir
How is the taper ground in the lobe on a non roller cam. Is the wheel dressed on a angle. If so then a roller cam would take a square dressing. ???? Thanks.
2 ways, for taper some machines actually dress the wheel at a angle and some the actual head pivots so you can set the angle, so flat no taper for rollers.
I wonder if u can do a video on the subject of taper. I heard that some cams have too much , some not enough, some have taper in one direction, some in two directions, some like nail head Buick’s have none. ??? Also I have a garage and machine shop in Fayetteville NC. We got some studebaker cams. Can you regrind them for us ?
That hardening is nowhere near 3/8”, maybe half of that at 3/16” and I’ll put any amount of money on it
Come on down, I'm happy to take ur money
What would be used in a late model 358 8300rpm flat tapit
Really high end stuff uses billet steel,
@@powellmachineinc3179 thank you