I just love old school mechanics/engineers they save you a frotune they are honest decent folk if you can find one stick to them like glue because in my experiance the new breed just want to rip you off make as much as they can from you and expect you to return Well guess what I dont go back and then I learn from chaps like this and just do it myself however if I lived near to this chap I would use him all the time and give him a living that he deserves.. I just hope fella you make a few bucks from this youtube thing great vid as always and thanks for teaching us mere mortals how to repair and not throw saving both us and the god dam planet THANK YOU FROM THE BOTTOM OF MY HEART I,, like most,, can not afford to buy new so depend on re vitalizing old stuff to stay in good shape in what I do CUT GRASS HEDGES etc etc !!!!
the fuel inlet screen/filter is considered a capilary screen, very fine weave, and they can get clogged and it won't be visible, not the problem here but just another tip...
@@getyourkicksagain dont go to the stihl dealers in Montgomery, Alabama! One charged me $ 24 for 12 inches of fuel line and a primer bulb after i explained i fix up,9k m
Thanks Jeremy, I am rebuilding a Poulan hedge trimmer with a Zama carb and plastic purge base. True...one check valve is not working properly. The tiny rubber diaphragm has a small tear in the membrane from the spring in the check valve . I opened the valve by carefully prying out the aluminum disc which hides the spring / diaphragm and placed a small drop of superglue on the rubber flap which is thin as paper and smaller than a pencil eraser. I had to carefully do this under a microscope I use for repairing electrical circuit boards. I will see if the glue seals the rubber flap and use the trimmer until I can find a replacement base. good job on the video. I had to look for a while before I found your video but I have been your subscriber for a while. Keep up the good content. JwgK Houston Tx
I been swapping g pieces from 3 diffrent carbs trying to get my husqvarna ld128 to run but the primer squeaks but no fuel goes into the bulb. This trimmer worked great for two years not a single problem but all of a sudden it's one thing after another with it. I'm about to wrap ut around a tree.
Really appreciate the great content. If not rebuilding original carb with a kit, do have any aftermarket brands you suggest and or ones to stay away from? Thanks a lot. These videos a very informative.
Have watched several of your videos and they are always excellent. I have a 2-stroke Ryobi (Zama carb I believe) which primes just fine, but when it's running, the purge bulb is completely w/o fuel. Any tips on why that might be happening? It's also hard to re-start, and I wonder if there is a connection between the two. Thanks
You must have some strong lungs. I have to use my vacuum/pressure tester to test the check valves in those white primer base assemblies. I can use my lungs to test the check valves in the carburetors but the ones on those white primer bases are strong as hell.
I have a Tanaka 2 stroke edger with a Walbro carb. It will run wide open but not idle. I've done everything I can think and check. Where should I look?
ZAMA C1U-K19 JD 21c weed eater air filter soaked with fuel and fuel seams to be splashing out of carb when i remove air filter and run it. any fix for this. also cant find a new air filter online to order.
I have a mantis tiller, same issue and sprayed son brake cleaner on those holes but didn’t make a difference then went and blow some air And now it primes, just wanna make it clear, the primer base was one of those typical pink rubber ones, so maybe that’s why I got lucky
WHY !! DON'T!! YOU !! APPLY !! THE !! BLOWTORCH !! TO !! THIS !! TOO !!!?? LIKE !! YOUR !! OTHER !! VIDEOS !! WITH !! THE !! CLEAN !! SPARK !! PLUG ! AND !! ARRESTOR !! SCREEN !!! ?????
Авто/Мото
Short, sweet, and simple. Thank you.
Great video as usual , very helpful information . Thanks for taking the time .
Your video s just keep getting better thanks for your hard work
Thank you Jeremy. Fixed my Walbro on my Homelite ST285 with your help on this video tonight. Win win !!
Great video Jeremy. This helped me and I'M sure it will help others.
I just love old school mechanics/engineers they save you a frotune they are honest decent folk if you can find one stick to them like glue because in my experiance the new breed just
want to rip you off make as much as they can from you and expect you to return Well guess what I dont go back and then I learn from chaps like this and just do it myself however if
I lived near to this chap I would use him all the time and give him a living that he deserves.. I just hope fella you make a few bucks from this youtube thing great vid as always and thanks
for teaching us mere mortals how to repair and not throw saving both us and the god dam planet THANK YOU FROM THE BOTTOM OF MY HEART I,, like most,, can not afford to buy new
so depend on re vitalizing old stuff to stay in good shape in what I do CUT GRASS HEDGES etc etc !!!!
So l Guess ! Your Hedge Trimmer ! Was Second Hand ! Too !!??
Great camera work as always, 40 years of small engine experience myself, you are always spot on and honest.
Great video . I am trying to up my 2 stroke game and actually repair or rebuild some of the carbs. This is a great troubleshooting tip.
Once again I learned something very useful.
Thank you
Thanks for explaining it so well…it helped me get through a pickle…thanks
Man you break it down like nobody else in the business! Well done MM one.
Very nice information brother! Keep up the great work.
Awesome video as usual Jeremy!!
the fuel inlet screen/filter is considered a capilary screen, very fine weave,
and they can get clogged and it won't be visible,
not the problem here but just another tip...
I even smashed save button, nice, thank you
Please keep up the fine work!
i learned something new on this video
Great video!!! I really appreciate the way you explain how to diagnose these carburetor problems. Keep up the Good work!
Just what I needed, thanks
The hands of a surgeon w/ those forceps Dr. MM1
Good troubleshooting tips.
Just learned something from you. Thanks.
Gutter... LOL yes we also have a cabinet full of used carb parts. We give any used parts we have away for free and customers love it.
@@getyourkicksagain dont go to the stihl dealers in Montgomery, Alabama! One charged me $ 24 for 12 inches of fuel line and a primer bulb after i explained i fix up,9k m
Хороший ремонт! Good repair!
Thank you so much.
Great fix, dealer wanted to jeep it for 10 days & charge 1q5 for rebuilt carb!!
Well now, I am going to have to check this out, because I have this exact issue going on. Thanks!
Thanks, I also have this same issue on my echo weed eater
That's great man,👍
Good video thanks.
Looks liked it worked.
Nice video!
Thanks Jeremy, I am rebuilding a Poulan hedge trimmer with a Zama carb and plastic purge base. True...one check valve is not working properly. The tiny rubber diaphragm has a small tear in the membrane from the spring in the check valve . I opened the valve by carefully prying out the aluminum disc which hides the spring / diaphragm and placed a small drop of superglue on the rubber flap which is thin as paper and smaller than a pencil eraser. I had to carefully do this under a microscope I use for repairing electrical circuit boards. I will see if the glue seals the rubber flap and use the trimmer until I can find a replacement base. good job on the video. I had to look for a while before I found your video but I have been your subscriber for a while. Keep up the good content. JwgK Houston Tx
I been swapping g pieces from 3 diffrent carbs trying to get my husqvarna ld128 to run but the primer squeaks but no fuel goes into the bulb. This trimmer worked great for two years not a single problem but all of a sudden it's one thing after another with it. I'm about to wrap ut around a tree.
Seriously though, as always, very informative brother!
i guess it's pretty randomly asking but does anyone know a good site to stream new movies online?
@Kane Lucas flixportal :P
@Chaim Payton Thanks, I went there and it seems like they got a lot of movies there =) I appreciate it!!
@Kane Lucas Happy to help :)
Thank you
Really appreciate the great content. If not rebuilding original carb with a kit, do have any aftermarket brands you suggest and or ones to stay away from? Thanks a lot. These videos a very informative.
Awesome
Thank you so much im having an issue with my srm210 the primer bulb is hard to prime can that be that the carb is dirty and its hard to prime
Have watched several of your videos and they are always excellent. I have a 2-stroke Ryobi (Zama carb I believe) which primes just fine, but when it's running, the purge bulb is completely w/o fuel. Any tips on why that might be happening? It's also hard to re-start, and I wonder if there is a connection between the two. Thanks
You must have some strong lungs. I have to use my vacuum/pressure tester to test the check valves in those white primer base assemblies. I can use my lungs to test the check valves in the carburetors but the ones on those white primer bases are strong as hell.
I have a Tanaka 2 stroke edger with a Walbro carb. It will run wide open but not idle. I've done everything I can think and check. Where should I look?
4 stars Bro!
ZAMA C1U-K19 JD 21c weed eater air filter soaked with fuel and fuel seams to be splashing out of carb when i remove air filter and run it. any fix for this. also cant find a new air filter online to order.
What would cause this on a new carb and tune up kit? Also dies after running 10 minutes.
Bet you want haven’t yo have walbro 163 carburetor around?
how did it start ?
Mine seems to be sucking through the overflow pipe and blowing back out of my fuel line, what do you think this could be?
Its backwards.
On that particular carb, What side is for the intake line?
When I
Press the bulb it’s the one that sucks
But why this valve not not working, stuck with some dirt, natural wear? Any way possible fix this without replacing it?
No
Sorry it’s a non repairable part
I have a mantis tiller, same issue and sprayed son brake cleaner on those holes but didn’t make a difference then went and blow some air And now it primes, just wanna make it clear, the primer base was one of those typical pink rubber ones, so maybe that’s why I got lucky
How are you suppose to drink ya soda if ya mind isnt in the gutter lol
i use syringe to do this stuff.
Lol, mind out of gutter
WHY !! DON'T!! YOU !! APPLY !! THE !! BLOWTORCH !! TO !! THIS !! TOO !!!?? LIKE !! YOUR !! OTHER !! VIDEOS !! WITH !! THE !! CLEAN !! SPARK !! PLUG ! AND !! ARRESTOR !! SCREEN !!! ?????
They make a medicine for your condition
@@THEMOWERMEDIC1 WELL ! YOU ! NEED !! THAT ! MEDICINE !! MORE !! THAN !! ME !!
Cool
Хороший ремонт! Good repair!
Awesome