It is here and the latest FW 3.1.1 is full of bugs don’t buy this crap, it has poor quality and the support is absent. I received my unit untested and at 433MHz the frequency error was 2540Hz. The power output was only 2W on 70cm and only 6W on 6m . On 160m the output was 12W the other bands are ok. When transmitting on HF (20W) the bar graph scale end at 5W, when transmitting on VHF/UHF (5W) the bar graph scale ends at 20W, they are too incompetent to fix this tiny GUI error and there are a lot of 🐜 🐞 🐛. The worst bug is that the unit hags in TX without the possibility to power down other then to pull the power plug, this I due to poor EMC and holding a cell phone to close to it can trigger this error, also if HF is picked up over the cables it can crap up. Don’t buy this brick.
Will the DMR module be available to purchase for the first generation HS2? Is there information how to put the latest software on first generation HS2? Thanks !
DMR module works for the new generation HS2, and not for the first generation HS2. For the first generation HS2, if you have any questions or suggestions, please send email to us: hams@ailunce.com. if we can solve them via the firmware or software, we'll do that as soon as possible.
The NG HS2 has a different bootloader, different RF Board, and other major hardware differences, including an internal battery & charger and related management, so the NG HS2 software will not run on the IRL HS2 - this has been attempted already using the current QR20 firmwares, and unless the bootloader source is made available, will never happen. You, I and the others who bought an original HS2 are frozen in time. Never mind, it's still a great little radio..
You should read the spec and manual before asking stupid questions, you also should read comments on RUclips, Facebook and other platform before thinking of buying this unit, I an oe6ccp and have this unit for one month now so I know it well, SAVE YOUR MONEY
Have ordered mine with ETA 5 October 2022 :)
When espected in europe?
Hi! Have HS2 old version Latest firmware is 1.37? Or can upgrade to v2? Thanks
It is here and the latest FW 3.1.1 is full of bugs don’t buy this crap, it has poor quality and the support is absent. I received my unit untested and at 433MHz the frequency error was 2540Hz. The power output was only 2W on 70cm and only 6W on 6m . On 160m the output was 12W the other bands are ok. When transmitting on HF (20W) the bar graph scale end at 5W, when transmitting on VHF/UHF (5W) the bar graph scale ends at 20W, they are too incompetent to fix this tiny GUI error and there are a lot of 🐜 🐞 🐛. The worst bug is that the unit hags in TX without the possibility to power down other then to pull the power plug, this I due to poor EMC and holding a cell phone to close to it can trigger this error, also if HF is picked up over the cables it can crap up. Don’t buy this brick.
Will the DMR module be available to purchase for the first generation HS2? Is there information how to put the latest software on first generation HS2? Thanks !
DMR module works for the new generation HS2, and not for the first generation HS2. For the first generation HS2, if you have any questions or suggestions, please send email to us: hams@ailunce.com. if we can solve them via the firmware or software, we'll do that as soon as possible.
The NG HS2 has a different bootloader, different RF Board, and other major hardware differences, including an internal battery & charger and related management, so the NG HS2 software will not run on the IRL HS2 - this has been attempted already using the current QR20 firmwares, and unless the bootloader source is made available, will never happen. You, I and the others who bought an original HS2 are frozen in time. Never mind, it's still a great little radio..
What are the transmit ranges? That's something that wasn't clear for me. Especially interested if it's HF +6M, VHF, UHF
You should read the spec and manual before asking stupid questions, you also should read comments on RUclips, Facebook and other platform before thinking of buying this unit, I an oe6ccp and have this unit for one month now so I know it well, SAVE YOUR MONEY
Hello. When comes the HD2 ? 🥰
can the DMR mode be used on H.F?
I don't think so as the DMR module uses the ANT1 socket
so new generation HS2 is the QR20??
No, it is Ailunce HS2. Please learn more here :www.ailunce.com/hs2-hf-vhf-uhf-sdr-transceiver#A9154c
@@Ailunce ummmmm so what is the differnce from QR20 and do you have the DMR module ready to ship?
@@dougtyper Sorry, we don't know more about QR20. We have the DMR module ready to ship for the new generation HS2.
@@dougtyper The QR20 has a black case, the NG HS2 has a blue case?
Congratulations! I'm looking forward to seeing the M17 openTRX version. de Yama JA3QWG
おめでとうございます。 宜しければ、M17 openTRX仕様の組み込みを、是非ご検討願います。 de Yama JA3QWG
You are not honest, just a scammer