SpeedyBee Bee35 Build - Part 3 - HappyModel EP2 & DJI O3 Air Unit Wiring
HTML-код
- Опубликовано: 5 окт 2024
- This is the third episode of my SpeedyBee Bee35 Cinewhoop build. In this video, I go through wiring of the HappyModel EP2 receiver and DJI O3 Air Unit.
Links mentioned in this video
Haku3D EP2 TPU cover/holder:
www.thingivers...
If you would like to see the rest of the build, here is a link to the build series playlist:
• SpeedBee Bee35 Build S...
(this is currently the latest video released for this series. So stay tuned for more of this series!)
-- Components --
If you're interested in purchasing any of the components shown in this build, consider using my affiliate links below.
(I receive a small commission at no extra cost to you, and it helps me make more of these videos)
SpeeedyBee Bee35 Pro/Standard Cinewhoop Frame:
s.click.aliexp...
SpeedyBee F4 Mini + 35A BLHeli_S ESC Stack:
s.click.aliexp...
SpeedyBee 2006 1950KV Motors:
s.click.aliexp...
HappyModel EP2 ExpressLRS Receiver:
s.click.aliexp...
HQProp T90MMX3 Props:
s.click.aliexp...
DJI O3 Air Unit
www.dji.com/au...
-- Bind and Fly Version --
If you like this cinewhoop but not interested in building it from scratch, you can buy the bind and fly here:
s.click.aliexp...
----------------------------------------
Contact me:
nxp200@gmail.com
If you like my content and wish to support me, please consider joining my patreon:
www.patreon.co...
Fancy buying me a coffee if my videos have helped you?
www.buymeacoff...
Thank you for another video in this brilliant series. I am still in the middle of a very similar build and I find your vids very helpful. Thanks also for leaving the mistakes in the video. We all make them and it's helpful to see how you overcome them. Happy flying amigo. Cheers 🍻
ok my friend I put together one looking at your video it was the best video in the world it was very well explained big hugs friend congratulations
Hello my friend, thank you very much for your attention, now I put the propellers in the correct position, it looks great now
bro, thank you very much, your video was very well explained, very good
ball show my friend, now all I need to do is get my pieces to start assembling mine, big hugs
Hello friend, I'm here watching your video and that USB like you did
I don't know if i missed it but what was the final weight with and without battery?
Hi nice job👌does o3 unit rquires external bec? Or is it perfect to go with the inbuilt 9v pad?
@@Skysiv the 9v pad should be good
Hey, great tutorial! I have question regarding the DJI O3 air unit. I want to build a drone, that is capable of doing still photos of terrain. I want to do photogrammetry also photos of historical sites. Is there any way to make the DJI unit also make photos, or it is only capable to make videos? Did not find many people trying something like this. As a backup plan, I could just have two cameras, but it would be best to use something like O3 Air unit combined with third-party gimbal. And yeah, I know it's probably easier to just buy Mavic mini, but I also want to experiment with machine learning, so it makes sense to do everything on this build. (I already built a few acro fpv drones, but with basic fpv cameras).
Thanks for your comment! Unfortunately I think the O3 Air Unit only has video recording capabilities and no photo capturing. You'll likely need a separate camera for what you're after. Sounds like a great project though!! Good luck! 👍
@@nxp200 Thank you. I am already considering some sort of compact camera with manual shutter that would be triggered by servo or some adapter. But of course it complicates the whole build.
Hello friend, how long does your speedyBee 35 last?
Thanks)))
Hi bro, I can copy this and paste it into clear and I can tell you which battery you use, I think mine is very slow, that's the way it is my friend
You'll need to copy just the PID profile section. Not everything else. Battery I'm using is the CNHL 6S 1300mah (Black Series)
Hi friend, what was the PID configuration you put on the speedyBee 35 bee?
I copied the PID settings from a CLI Dump of the SpeedyBee Bee35 bind and fly that Oscar Liang uploaded and applied that. You can find it here intofpv.com/t-original-cli-dump-for-speedybee-bee35-analog-elrs .
Here's his main review page of the Bee35 oscarliang.com/speedybee-bee35-cinewhoop/ .
I also just finished recording the next episode of this series where I actually do this, so you'll see it in a few days after I complete the editing.
Ok OK my friend, I'll wait for you to post the video so I can do it with my drone, it was without the OSD thanks to your video I managed to configure the OSD now I'm very happy
hello friend what is the correct side of the propellers the part that has the name is on the floor or up say it to me please
The propellers need to push down, so the brand label needs to be facing up
If I dont wire the SBUS on the dji O3 air unit to the board will I still be able to use the dji rc controller?
No. The DJI controller only works via the SBUS wire from the O3 Air Unit
doesnt the 03 plug into the speedybee stack?
my mistake i have both the 20x20 and the 30x30
What about Gps ??
Why can’t I connect the Air unit to the plug on the FC?
The flight controller in this video is the Mini and does not have the plug for the air unit. If you are using a different flight controller that has a plug for a digital air unit, make sure the pins are in the correct order, especially the ground and power.
Hi man, watched all 3 parts but you didn't mention anything about he props how to put them in the correct order, I am struggling to put the props cause the 6mm screws wont fit right can you help?
The motors should have come with 8mm screws that will fit. I think I also had spares because the frame also came with them.
@@nxp200 thank you for that, it works. but can you tell me the motor config in bf. confused on it, my quad wont take off. my settings are wrong
@@SahilMore19 that's the next episode of this series. Apologies, but I haven't had time to finish editing the video because I've had to move house. Hopefully I can release the video soon.