🖨️ EASIEST* Heatbed wire mod for the Monoprice Mini or the Malyan M200 3D printer - No drill
HTML-код
- Опубликовано: 6 фев 2025
- As I already used the 3D printer Malyan M200 (also known as the Mono price mini) for a while now.
I started to get hit by the poor design of the wiring of the heated bed by the printer company.
That said, it is an awesome printer for the price, do not get me wrong.
It just need a ver little attention, as almost any 3D printer would, so it is not something extremely negative, although it sounds like it !
So I got hit by the wire problem and had to fix this with the well known Heat-bed Wire Mod.
Wich you can find here and on many other places and youtube video's :
www.mpselectmi...
So a bit how-to and tutorial how I did the rewiring of the heated bed and termister.
Here are the printed parts that you need from thingiverse:
www.mpselectmi...
-----------------------------------------------------------------
Braided PET Expandable Sleeving Wire / cable:
s.click.aliexpr...
Micro SD TO SD Card Flexible Extension flat Cable:
s.click.aliexpr...
5V 8W USB Powered Soldering Iron:
s.click.aliexpr...
Wire cutter:
s.click.aliexpr...
Wire stripper:
s.click.aliexpr...
-----------------------------------------------------------------
Get some money back from all your purchases on almost all big shops, including Aliexpress, where allot of mine items is coming from!
It doesn't cost you anything or even the seller it is straight from Aliexpress's pocket, so no disadvantages for yourself but it just helps this channel a small amount ;)
www.earnieland...
---------------------------------------------------------------
Donate:
-------
Bitcoin:
1AzLLWyjxNm2sdkZcGwgXwUA9Mj6QmWLEs
Ethereum:
0x9Dc0f64b1c0d878084899b13Fb28560d1ff20382
EOS:
0x9Dc0f64b1c0d878084899b13Fb28560d1ff20382
Litecoin:
LUvfEKkCPNE3K1oQYEXzD3QYZMW6VmxcU1
Myriadcoin:
MP5563wr8xnypS2dA2SZfXwpTu69r32Q6P
Bitcoincash:
qqr2gwdegsxfrkgfvn2yadv4dqe7mzvjx5u2z7pvu0
-----------------------------------------------------------------------
Credits logo: Graphicrepublic - Freepik.com
Thank you for this video. I didn’t realize the bed wasn’t heating up on mine. . I stumbled upon this video, checked the wires and bam it was ripped right apart. I repaired it in about 5 minutes. I found that a little hot glue worked to keep the wires elevated and in place Works great now.
Thanks for your comment, glad you had something on it.
Happy printing 👌
thanks so much you do such a great job at explaining! You should do a video on replacing the thermistor for the extruder. I can't find any good videos on how to do this on the monoprice mini, and it's such a common problem on them!
When in need, I'll make a video about it for sure!
What brand is that wire stripper?
I added a link to them in the video descriptions ;)
Thanks for the tutorial. Have you gotten around to doing the video on wiring the fan? I need to do this very soon (was hoping for today or tomorrow) as my bed temp is jumping back and forth from normal to 999C. One thing that had me stumped was how to power my two 40mm fans. They're very low power, so it wouldn't take much to run them.
Well, if have the time tomorrow...
LOL, take your time. I might be able to figure it out for myself. If I can find the source inside (which I don't think will be hard), I can probably make the connections. Thanks again for your help. ;-)
Done ! 😀👍
ruclips.net/video/K1fjpzE8vBQ/видео.html
Awesome! :-D
Nicely Done!
Thanks, also for your comment!
Awesome video. I just bought my monoprice mini v2 and will look to do this mod when I get a chance, however, I don't have anything to soder with. I know this is the recommending way to attach the wires but do you think plain old electrical tape will hold up inside the tubing?
Yes, have enough stripped wire, to twist and have it taped good. But check the description, the solder iron I do it with cost so little...
Hello! I attempted this mod but ran into an issue of the themorstat cable broke at the white connectoed at the board. Do you know if where i can find a replacement cable? I can provide pictures if needed
Break, like how ? Did it came of from the little white connector ?
Nerdiasme the red came out of the connector and the metal end snapped off
Can you solder the cable to the little metal end and push it back into the white connector ? Otherwise you need to order something like this:
s.click.aliexpress.com/e/vrVrjYb
Nerdiasme did not think of soldering the metal piece directly to the wire.. is that possible?
As I understand your situation, yes you can, polarity of the thermistor doesn't matter, so I would try for sure.
Does anyone have a URL for the side plate, so I can print a set for myself? TIA.
Link in description 😉