how will i charge my battery its a 48v but its a plug and play to stock switch/controller and charging port,but i ordered the gauge kit along with your 48v 1000w controller that i plan to use
Hey im just wondering if this is a stock cart, I have a stock cart, and bought a gauge from amazon and the only things that are different is the mount and the new on/off switch. I dont know how to install this gauge with no mount, would i have to buy the mount?
You can’t just buy a gauge for stock controller you’d have to solder it to power wires somehow. I sell plug and play controllers that this gauge kit is set up for. I go over all of that in the video
Those are all tested before hand. Hopefully, you didn’t push the connector in with the pins mot straight. If so it probably fried the gauge. Should have plugged in smooth
i bought the temperature gauge and a 48v controller but my battery percentage isn’t accurate on the temperature gauge no matter what my battery percentage is, it marks on the temperature gauge that i have 0 percent
great idea, top channel
Thank you very much!
If you pick Andersons connector for the controller is that for the motor and battery connector.
No just battery but I actually don’t offer that connector anymore
@@JordyBuildsalso can you change it from Celsius to Fahrenheit
@Killian25111 no
When are you going to restock this battery gauge??
This weekend
When’s the next restock!?!? I need this!!!
Restocked!
When are you restocking!!
I have one more I’ll make active for ya
@@JordyBuildsyes please, I’ll dm you on insta
@@JordyBuilds thanks, I got it
Does this work with taxi garages customs controllers?
No I don’t think they have a gauge port option. You’d have to buy my controller
Hi, I was wondering what the max temperature your motor should be without damaging your it. Using a xl 500w motor.
90c
Hey when do u think it will be back in stock or could I get it anywhere else
Back in stock
What is the max temperature for the standard 24V 250W motor? i.e. When should I consider it overheating?
90c
Can i use the battery gauge with the stock controller and taxi garage 36v battery? And when are you restocking?
No and later this week
I have one, how do I get it. To stop beeping?
Did you follow the link to program it for your battery? Need to set voltage and turn off low voltage alarm
@@JordyBuilds I actually didn’t where do I find that?
I got it thank you
how will i charge my battery its a 48v but its a plug and play to stock switch/controller and charging port,but i ordered the gauge kit along with your 48v 1000w controller that i plan to use
Order a battery that has a charger. You won’t use the stock charge port.
How long do you have to wait to take off the tape and do you have to keep you controller siting there all the time😅 even driving it 8:48
Until it’s dry. You mount the controller however you see fit
Hi I currently have taxi garage 36v and taxi garage speed controller. Will your controller and the gauge work with the taxi garage 36v
Yes if it has a dean connector or 4 pin connector adapter. Chose the option that best suites you and your battery connector
I have a random question I’m using a 40v ryobi battery to power it should I get the 36v controller or the 48v
I’ve had a few people have some issues out of the 40v ryobis. But you’d need 36v controller!
@@JordyBuilds swag thanks!
Where I can load the Battery now
Idk what that means
Hey im just wondering if this is a stock cart, I have a stock cart, and bought a gauge from amazon and the only things that are different is the mount and the new on/off switch. I dont know how to install this gauge with no mount, would i have to buy the mount?
You can’t just buy a gauge for stock controller you’d have to solder it to power wires somehow. I sell plug and play controllers that this gauge kit is set up for. I go over all of that in the video
I just tried to set mine up with my controller from you and it wouldn’t show any thing on the screen but the screen would get really hot
Those are all tested before hand. Hopefully, you didn’t push the connector in with the pins mot straight. If so it probably fried the gauge. Should have plugged in smooth
@@JordyBuilds I got my screen second hand so it might be fried
what is the connecter on the battery?
Razor 2 pin is what I call it
6.3mm spade 2 pin to be exact
Thank you@@JordyBuilds
i bought the temperature gauge and a 48v controller but my battery percentage isn’t accurate on the temperature gauge no matter what my battery percentage is, it marks on the temperature gauge that i have 0 percent
Did you watch the video on how to set up voltage gauge linked in description?