Fusion 360 | Surrogate Emboss

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 57

  • @ianpendlebury3704
    @ianpendlebury3704 3 года назад +35

    The Thicken Cut is genius - I would never have thought that this existed, let alone find a way to use it! You really are very creative - thanks for sharing all your knowledge.

    • @Fusion360School
      @Fusion360School  3 года назад

      It is very counterintuitive, especially with the name "thicken".😀

    • @Tonicwine999
      @Tonicwine999 3 года назад

      I love fusion 360 but have always felt fusion was a little bit limited and flat till I found this guy

  • @TotallyFred
    @TotallyFred 3 года назад +13

    Hands down the most useful, practical, focused channel about Fusion. Each video is a gem. Thank you.

  • @rbyt2010
    @rbyt2010 3 года назад +14

    Thicken/CUT - never occurred to me. Thanks!

    • @gorgonbert
      @gorgonbert 3 года назад

      Brilliant!

    • @Tokolist
      @Tokolist 3 года назад

      yeah, cool trick! this is exactly why I absolutely love this channel!

  • @medyk3D
    @medyk3D 3 года назад +3

    Thicken cut - this is why I watch your videos, not only I just learned how to use surrogate emboss I learned also this handy little trick. Thanks 👍

  • @joepasqua1751
    @joepasqua1751 3 года назад +3

    Another very instructive video. Thank you. Nice tip about using thicken-cut to avoid all the extraneous bodies.

  • @dittilio
    @dittilio 2 года назад +2

    Showing WHY you do things, especially with that emboss "failure" clip, is one of the best things about your channel. Really shows how rigorous you are.

  • @Ricky32908
    @Ricky32908 Год назад +1

    You’re a genius!!!! I’ve been battling this emboss trying to make a honeycomb pattern on some beautiful curved custom pens and couldn’t get it to work, you sir deserve credit for the surrogate emboss

  • @boonjabby
    @boonjabby Год назад

    That, my fine sir, in an incredible workaround for the limitation of the emboss command!

  • @Tonicwine999
    @Tonicwine999 3 года назад +2

    Really hope Autodesk are watching this to see the weird and wacky ways you have to go about doing an emboss like this. Although it is great the work they have done so far with their emboss feature it’s still so far in its infancy. Great tutorial as always.

    • @Fusion360School
      @Fusion360School  3 года назад

      I will cut Autodesk some slack here. Solidworks has the same problem with their wrap tool. I think the technical term is that this will only work on a developable surface. I am not sure whether this is a geometry limitation or a software limitation.

  • @hazynpeterson4083
    @hazynpeterson4083 Год назад

    ya, this guy is great,,,no dilly dallying ...and clear.good technique and fluid

  • @kspec2001
    @kspec2001 Год назад

    this is a great video! thanks for sharing

  • @WMBayouLures
    @WMBayouLures 3 года назад +5

    Sweet! Thanks for doing this, I hope to put it to good use soon. Maybe one day emboss will be able to handle multiple curves and solve all our problems.

    • @Ricky32908
      @Ricky32908 Год назад

      If only Emboss could easily wrap a complex plane, it would make my job SUPER EASY

    • @Fusion360School
      @Fusion360School  Год назад +1

      This is apparently in the works. But Autodesk has been saying that for a while now, so.......😄

  • @zencow
    @zencow 3 года назад +2

    That Thicken+Cut is clever. I think would have tried to do it with Combine:Intersect with a solid body, as I used similar techniques with OpenSCAD.

  • @3dconceptsofutah757
    @3dconceptsofutah757 2 года назад +1

    Thank you for your creative modeling videos! Very helpful for one who has feared surface modeling for most of my life ;-D

  • @TRCFL
    @TRCFL 3 года назад +5

    I bet the guys at Autodesk are taking notes.

  • @WPGinfo
    @WPGinfo 2 года назад

    That is a really clever solution, Thank You!

  • @ianschutt6242
    @ianschutt6242 3 года назад

    Very clear, well explained and easy to follow thank you!

  • @stefanguiton
    @stefanguiton 3 года назад

    Very Clever!

  • @pistolao_vr
    @pistolao_vr Год назад

    Oh man you saved me! Thank you so much!

    • @Fusion360School
      @Fusion360School  Год назад

      Do note that there is a recent update to allow for embossing on complex faces. Perhaps you can try that first. In some cases, it will still distort the profile. If that happens, this method can be an alternative.

  • @JuanAdam12
    @JuanAdam12 3 года назад

    Genius content. Thank you, once again.

  • @generalsirc2615
    @generalsirc2615 2 года назад

    this was exactly what i needed thank you sooooo much!

  • @Vanastarr
    @Vanastarr 3 года назад

    Great video.

  • @toinevanderwielen9508
    @toinevanderwielen9508 3 года назад

    Great video and very well explained. Thanks!

  • @PirateWasHere
    @PirateWasHere 2 года назад

    IQ 1000 !! Really thank you for sharing this 🚀🚀

  • @modernDEsignwithFusion360
    @modernDEsignwithFusion360 3 года назад

    Really great video! Your skills are top-notch!

  • @marcotronic
    @marcotronic 3 года назад +1

    Thanks a lot. I have probably never used anything in the Surface tab before 🙂

    • @Fusion360School
      @Fusion360School  3 года назад +1

      Once you use it, you can't imagine not having it.😀

  • @Daaell
    @Daaell 3 года назад

    Amazing tutorial, thanks

  • @fouadelshafey502
    @fouadelshafey502 3 года назад

    Great video . thanks alot

  • @Energetic_Ballistic_Solutions
    @Energetic_Ballistic_Solutions 7 месяцев назад

    I'll try this later

  • @brandonsummers6360
    @brandonsummers6360 3 года назад

    so smart dude thank you

  • @WWalleYY
    @WWalleYY 3 года назад

    Great stuff, thanks!

  • @RixtronixLAB
    @RixtronixLAB 3 года назад

    Nice video, thanks :)

  • @michaels3003
    @michaels3003 3 года назад

    The first comment today. Very impressive. A "MUST WATCH" video. 👍👍

  • @smithwesson4010
    @smithwesson4010 3 года назад

    Круто. Лайк, подписка!

  • @elektronstorm
    @elektronstorm 3 года назад

    Hi, can you do an example of knurling on pistol handle?

  • @mohamedalrayesmrunlocker910
    @mohamedalrayesmrunlocker910 3 месяца назад

    stuck the profile would not be able to select them

  • @Tarex_
    @Tarex_ 3 года назад

    Any chance for a video on modeling from reference pictures? I have parts here with compound curves and complex curves, but setting up the references is a pain, even with a ruler in each photo, the sizes are all over the place even with the calibrate option

    • @Fusion360School
      @Fusion360School  3 года назад

      I did a video on this some time ago. Not sure if this helps you.
      ruclips.net/video/YpUgniZ5Qos/видео.html

  • @WWalleYY
    @WWalleYY 3 года назад

    One question though, lets say I want it to cut into the bottle, what would I have to do then? Just this, but then in reverse?

    • @Fusion360School
      @Fusion360School  3 года назад

      When I saw your question, the first thought that came to my mind was to use the deboss option in emboss. But it quickly became apparent that it was not going to be that easy. I am in the middle of preparing a follow-up video to show this. Thank you for the question!

    • @WWalleYY
      @WWalleYY 3 года назад

      @@Fusion360School amazing! Thank you so much :)

  • @PaulBHartzog
    @PaulBHartzog 3 года назад

    So IS there a way in Fusion to have an actually accurate pattern on a surface that is non-planar in more than one direction? I have plenty of curved surfaces that I need to pattern components and/or features onto, and I don't know if Fusion can even do it. :-/

    • @Fusion360School
      @Fusion360School  3 года назад +1

      I have not tried this yet but it might be possible to use the sheet metal function for this. Of course, it would be a lot more involved. You can refer to this video to get a sense of how this can be done.
      ruclips.net/video/yfJBy9xpqI8/видео.html

  • @chinchan9
    @chinchan9 3 года назад

    I keep getting Error: new ef_int outside edge
    on embossing :( anyone got a solution?

    • @Fusion360School
      @Fusion360School  3 года назад +1

      Hi, during my testing, I would sometimes get this error too. I would suggest that you try to slightly adjust the pattern. This can be done either by adjusting the size of the diamond or the spacing.

    • @adriansue8955
      @adriansue8955 3 года назад

      Ugh, Fusion 360 still full of glitches

  • @Cicada-uv5se
    @Cicada-uv5se 2 года назад

    Your very good at modeling in fusion 360! Would you be able to help me model something?