You prolly dont give a damn but does any of you know a method to log back into an Instagram account..? I was stupid lost the account password. I would love any help you can offer me.
i too have same bar with in mumbai never sure if repair bat survive a match but i m keep hopding to it my first club cricket bat great video by the way just love watching cricket bat
So many comments from people who obviously are not woodworkers - Type III PVA (waterproof wood Glue) will be stronger than the original wood. It is also flexible and will bend and twist with the surrounding medium, in this case, the bat. Epoxy style adhesives, although arguably stronger, will not be as flexible and will therefore crack if subjected to strong forces.
Nice work mate. I would probably address and access the break in the blade before replacing the handle. I have fixed few bats so far and found the polyurethane glue to work the best. Keep up the good work.
Sheesh, everyone is an expert. I think using the old broken pieces is more fitting to retain the look of the bat. I have no experience with repairing bats, but I have 28 years of carpentry skills. Wood glue is stronger than you would think, stronger than the wood if used properly. OK there are no massive wood working skills used, but there is no need for them. Its good honest wood work that could be attempted by anyone who is capable with tools.
As a wood worker I appreciate the work you put into giving this bag a second life. Nice job. I still have a bad from when I was s child it’s going on 30 years old now.
The skill for the repair is appreciated, however I am very sceptical about the way the repaired pieces will behave when a cricket ball hits them directly. I think it would have been better to replace a section of the damaged portion. Anyway best of luck
Can you please assist or provide details on how to create the jig to cut the bat handle out on the band saw? I'd be highly indebted to you if you. Thank you!
some people are complaining that it will break again yea its true but against hard ball not against tape ball 😉 P.S give the guy credit for putting so much effort and seriously he has done an amazing job
Hi josh, hope you are alright and safe. If possible, it would be great to have some long repair and bat videos during this lockdown stage. Best wishes for you and your family. Love from India. Regards
Superb workmanship!!! Emagin the amount of broken grade A willow bats that could be recycled for children in third world countries it would bring a lot of smiles around the world
wouldn't it be stronger if you were to cut off the square piece and replace it with a block of new wood? I don't know, just asking out of curiosity since the last piece looked smashed into many piece which were glued back together.. is this a fair question?
This is true, sometimes it's not worth it either because it wasn't done particularly well or there are things the repairer simply can't see. They should offer a warranty (mine is 3 months) that you can use to put towards a new bat.
Good work but will this bat last? Because the main repairing u did is with glue and that too with at least 4 small parts on bottom now that's the only problem and thats the major problem, i have seen a lot of bat repairs in which they replace the whole piece and thats looks more reliable than this, now whoever plays with this bat will be always worried as this bat solely depends on glue, anyways good video and i could be wrong and i hope i m wrong.
Broooo awesome work on the jig to cut the bat handle. Do you have the plans available to build the jig ? I am ready to pay for it. Please let me know. I am from USA
That is one of the tricks played by the manufacturers.they fit a handle seperately although they know they can make a whole bat in one piece.but they put a handle so that it could break and people will buy another bat.
@@bee-buscwakoti6907 in most cases i saw handle got broken and u r forced to buy a new bat.you can make a bat with a built in handle its not that tough.but they play smart with us.
Repairing is nice but bat is not able to paly with leather ball ... Bcoz bat bottom is not able to take face pressure of 130 km speed ball ... So paly with Tanis ball 🎾
A small time bat repairer will charge $150 and I’m sure JPG charges may be double of that which amounts to $7500 from a small time repairer. Pay that to an Indian and he/she will put their blood and sweat into it.
You wouldn’t need to be that quick. This is superficial fixing. Damage like that can’t be fixed in a way that would be sound for very long at all for use against even quite slow bowling.
Fantail cricket repaired a similar kind of broken bat.. You must watch that.. Anyway a great job.. Though the bat will not last very long.. Still... A good job by you... Waiting for more videos
@harry dhiman contact the owner of the shop in this video his email is josh@JPGavan.com His repairs are absolutely amazing and his bats/gear is 10/10 I'd recommend him 100%
Please consider subscribing! Follow me on Instagram: instagram.com/jpgavancricket
Where is your address
He
Like the work you do, Can you pls do a snooker cue for fun?
You prolly dont give a damn but does any of you know a method to log back into an Instagram account..?
I was stupid lost the account password. I would love any help you can offer me.
@Yusuf Aaron instablaster :)
i too have same bar with in mumbai never sure if repair bat survive a match but i m keep hopding to it my first club cricket bat great video by the way just love watching cricket bat
So many comments from people who obviously are not woodworkers - Type III PVA (waterproof wood Glue) will be stronger than the original wood. It is also flexible and will bend and twist with the surrounding medium, in this case, the bat. Epoxy style adhesives, although arguably stronger, will not be as flexible and will therefore crack if subjected to strong forces.
Good
As a cricketer this is the most satisfying thing you can watch
Nice work mate. I would probably address and access the break in the blade before replacing the handle. I have fixed few bats so far and found the polyurethane glue to work the best. Keep up the good work.
Sheesh, everyone is an expert. I think using the old broken pieces is more fitting to retain the look of the bat.
I have no experience with repairing bats, but I have 28 years of carpentry skills. Wood glue is stronger than you would think, stronger than the wood if used properly.
OK there are no massive wood working skills used, but there is no need for them. Its good honest wood work that could be attempted by anyone who is capable with tools.
Looks like a brand new one well done jpg cricket
Anyone else find the fibreglass tape application very relaxing to watch?
Amazon pa mil jayegi
As a wood worker I appreciate the work you put into giving this bag a second life. Nice job. I still have a bad from when I was s child it’s going on 30 years old now.
Bat!!!
The skill for the repair is appreciated, however I am very sceptical about the way the repaired pieces will behave when a cricket ball hits them directly.
I think it would have been better to replace a section of the damaged portion. Anyway best of luck
Nice
Superbly restored. Look likes it is laborious and costly then to purchase a new bat.
Its true
This is actually art , priceless art
Ok
Can you please assist or provide details on how to create the jig to cut the bat handle out on the band saw? I'd be highly indebted to you if you. Thank you!
it might broke one moretime...but the way you repaired the bat is awesome...kudos to your work....u almost made a new bat....good work man
This is certainly one of the most satisfying video!!!! Keep up the good work mate!
some people are complaining that it will break again yea its true but against hard ball not against tape ball 😉
P.S give the guy credit for putting so much effort and seriously he has done an amazing job
Three cheers for this guy for his hard work.
Hi josh, hope you are alright and safe. If possible, it would be great to have some long repair and bat videos during this lockdown stage.
Best wishes for you and your family. Love from India.
Regards
Superb workmanship!!! Emagin the amount of broken grade A willow bats that could be recycled for children in third world countries it would bring a lot of smiles around the world
wouldn't it be stronger if you were to cut off the square piece and replace it with a block of new wood? I don't know, just asking out of curiosity since the last piece looked smashed into many piece which were glued back together.. is this a fair question?
Amazing craftsmanship but you should bandage the bottom half for the extra cushion since glued pieces would never be as sturdy as a whole wooden piece
Yep, did that after the video. Just doesn't look as neat.
Mr. Gavan do you approve of thread bindings in repairs like these?
Awesome vid mate a repair like that requires a lot of talent
Can you not fit a new willow piece instead of old
Just found you because of watching the test and glad I found you
Very nice cricket bat making
Nice video. You know your trade well. Just a query grinding the surface and back won't make the bat lighter by weight?
It removes about half an ounce.
@@JPGavanCricket Fair enough. Please upload a NET session with the bat if possible.
Sorry the bat doesn't belong to me
Man you are a dream of a cricketer.
,6,8 handle lenght and surface
I've watched most of your video's all l can say is you are a very talented bat and repair bat maker.
Very nice craftsmanship josh. You do a very nice job.
Its not so easyer than making a new. Really a good workmanship.
Just an awesome fix, and looks fantastic, great job!!
Very Nice work dear . Its isn't looking that bat is old. Its looking a new bat . I appericate to you . God bless you.
Ur a very skilled worker..good job
Awesome work with full of passion and dedication. Do you operate in India coz there would be lot of people who would like to utilise your services
awesome work brother, what type of glue is used in that small bottle to fill the opening cracks?
Super glue
Good work but 1 risk bat corner not run long but well done
Had a bat rehandled once and the next game the wood through the back split; handle was fine! Not convinced that repairing a bat is always worth it.
This is true, sometimes it's not worth it either because it wasn't done particularly well or there are things the repairer simply can't see. They should offer a warranty (mine is 3 months) that you can use to put towards a new bat.
Love your video from Bangladesh
Good work but will this bat last? Because the main repairing u did is with glue and that too with at least 4 small parts on bottom now that's the only problem and thats the major problem, i have seen a lot of bat repairs in which they replace the whole piece and thats looks more reliable than this, now whoever plays with this bat will be always worried as this bat solely depends on glue, anyways good video and i could be wrong and i hope i m wrong.
How much you will take for repairing a cricket bat ?
This video was so satisfying! Great work!
Sikher Head hHfddvh
Broooo awesome work on the jig to cut the bat handle.
Do you have the plans available to build the jig ?
I am ready to pay for it. Please let me know.
I am from USA
Nice work mate. Hopefully the Aussie top order have got your number, as they're going to need your services in the up and coming Ashes series.
Yeah, he has some good quality sand paper.
Awesome work mate
Very hard work bro but good job
hard work + passion= anything is possible 👍 great job mate
I think broken pieces can be removed and replaced by new single wooden piece..
U are right yeah...
Nope it will break again...
Yes, grafting a new piece is certainly an option but when I've got prices that fit together I find it a bit more durable.
certainly not
Yes you hit the bull's eye
nice work man
Great job buddy .. next time please include ping test by ball after the repair is completed
Stress relief!! Nice work👍🏻
Excellent work JP👏🏻👏🏻
Hu
Good behatrin
It’s all about passion ,great job well done Bro👍🏽😊
That is one of the tricks played by the manufacturers.they fit a handle seperately although they know they can make a whole bat in one piece.but they put a handle so that it could break and people will buy another bat.
Haha you do know the purpose of making handle separately right !
@@bee-buscwakoti6907 in most cases i saw handle got broken and u r forced to buy a new bat.you can make a bat with a built in handle its not that tough.but they play smart with us.
A mate of mine dose this. Also makes his own bats. His bats are amazing. Great skills and craftsmanship.👍👍🍻🍻🇦🇺🇦🇺
Nice repair
1M like for your great job. You’re awesome!
VIJAY 950itejkjgdei
hiii
right
It's not easy ...
I like you jannat
Hey you r repairing the bat which broke from edge can u repair a bat which was broke from handle
Repairing is nice but bat is not able to paly with leather ball ...
Bcoz bat bottom is not able to take face pressure of 130 km speed ball ...
So paly with Tanis ball 🎾
Can you put a link to your RUclips videos please so I can judge your work? You are obviously an expert.
He done his job with his heart.. this is what we indians missing..
A small time bat repairer will charge $150 and I’m sure JPG charges may be double of that which amounts to $7500 from a small time repairer. Pay that to an Indian and he/she will put their blood and sweat into it.
Priceless
Great work, from india
Just one 140kph+ yorker
But it is still very nice
Good work👍
Keep it up
BiLaL KhAn fingers crossed. It should be strong enough with all that glue!
You wouldn’t need to be that quick. This is superficial fixing. Damage like that can’t be fixed in a way that would be sound for very long at all for use against even quite slow bowling.
Bilal bhai. People who reach the level to face 140 mph yorker dont repair their bats
Lovely work
Thats one awesome video. Loved every bit of professional hard work put into it to repair it. Lovely. Thanx for this video
at the end .. hit a few balls with the same bat.. and make us hear the sound of ball hitting the sweat part of the bat 👍
nice
You are a good person and be honest well done brother
Great repair, but it wouldnt be a bad idea to use PPE. It would suck if you hurt yourself.
Good job bro keep it up
Im a little nervous about the toe of the bat
Beautiful work
Fantail cricket repaired a similar kind of broken bat.. You must watch that.. Anyway a great job.. Though the bat will not last very long.. Still... A good job by you... Waiting for more videos
How do you know? Are you a bat expert?
What a beautiful work very very fantastic work
See the video of fantail. how he repair bats and how you repair bats but you did it well
Good Job Man
Nice work dude keep it on
Toe of the bat will definitely come to you again
I highly doubt that the repaired area will take further blows from even a medium pacer.
Is that carbon fibre mesh you put on the front surface after the bat is ready?
Superb bro
Very nice reparing of bat
How much do you charge for a bat to repair?
Very nice bro you are good and good luck your next videos
Thanks for 4 million views!
nice job
Just one yorker boom
Nicely done good job bro
Hey there, what’s the name of the glue you use? Thanks
Why cut the handle off?
Great job well done
Welcome
great work sir
He was working super but this bat can't play in international game. We are general can play this bat.
Inko indo pak ke rate nahi malum hote....ye logo ko kabadi kam karne do....
Achchi season bat max 100 doller me aa jati he
🇮🇳Good work bro🇵🇰
Nice work!!!
How do you determine whether you use PVA or superglue at different stages of the repair?
Ben Wood basically it depends on access to the crack. If I need to get glue deep into a thin crack superglue finds its way in.
How much is the cost of cricket bat repaired
*Love your video from japan*
Amazing job bro
Can you give me a list of materials
Where is ur shop sir ?
@harry dhiman contact the owner of the shop in this video his email is josh@JPGavan.com
His repairs are absolutely amazing and his bats/gear is 10/10 I'd recommend him 100%
Need to replace the corner completely it’s just gonna break again