Directions from thrustmaster guys: Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
The only step I took from this is video was that i just turned wheel left as far as it go's,unplugged the USB plugged it back in again and the wheel calibrated to dead centre again, easy fix thanks for the video.
Make sure that your racing wheel is perfectly centered ; while holding it in this position, press the: Y, X & MODE buttons simultaneously (FLASH, PIT & MODE buttons on the 458 CHALLENGE GTE wheel & 599XX EVO 30 Alcantara® wheel) (K, N & MODE buttons on the F1 wheel)
I had a problem much like this with my old Logitech Driving Force Pro. It was even centering incorrectly the same way as yours (to the left and the same amount of degrees). I think you fix it there by holding down both pedals (either that or hold Start and Select, I can't remember, lol) as you unplug and replug the wheel.
Also if that doesnt Work, you could turn it all the way to the left until top , then to the right until top , then center it by yourself and press simultaneously Y, X and MODE, my brand new Tx was slightly off and that worked, no problems since I did that.
[Thrustmaster TX on original Xbox One] For me this trick worked, but turning the wheel all the way right instead of all the way left. Turning it all the way left before calibration did not solved my problem. I think it may depend on where the wheel thinks the center is before recalibrate.
I’ve tried everything and it doesn’t work, on f1 2020 it shows -2 degrees when I put it straight. But for me to get it to 0 degrees i have to turn my wheel slightly to the right ( or 2 degrees to the right) I can’t seem to figure out the problem can someone please help this never happened to me. And also my wheel is a f1 add on to the thrustmaster tx servo base.
I have it with TX servo base + rally r383 + sim. When it will finnaly center it turns of shifter and hand brake in the game every 15-20 min more or less and you have automatic gearbox. Resterat helps only for 15-20 min or less... :(
Directions from thrustmaster guys: Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
@@reviewforthetube6485 changing from USB 3.0 to 2.0. helped. Centering did not solve the problem at all but thanks for comment. I was in contact with Thrustmaster regarding this issue.
Alright So basically, with your wheel on and plugged into a PC, you must PERFECTLY centre the wheel as BEST as you can with your eyes. Try and get it PERFECT. Now if you have the regular stock T300RS wheel, with the rim centered as best as possible, you want to SIMULTANEOUSLY press the ST, SE and MODE button together. The racing wheel's LED briefly changes colour, then reverts to its initial colour. This means that the wheel's center value has been reset and automatically saved to the device's internal memory (you do not need to repeat the procedure every time you connect the racing wheel); this applies to all of the wheels (PS, GT, F1, 458 GTE, etc.). If you are on the GTE wheel or Ferrari Alcantara Wheel, For GTE and Ferrari Alcantara Wheel, press RADIO, RIGHT SHIFT PADDLE and MODE simultaneously. Hope this helps man!
Directions from thrustmaster guys: Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol.
Did you try the procedure in this video anyway? It has worked for a great many models of steering wheel. Also, someone below posted the following, which has worked for some people: "wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again" Hopefully at least one of these procedures will work for you.
Just solved this problem. On All Thrustmaster wheels exist combination of 3 buttons, which allows to recenter ur wheel There is an instruction drive.google.com/file/d/1fyoIw5fb5dvC8D8DDRDFl4uhyPHRv7tZ/view?usp=sharing
Led Soil answer is right, unfortunately (and absolutely not normal) i used to do it everytime before playing with my wheel during 2 Last year... Now nothing is fixing the issue, never centered whatever i can do. I'm tired with this Thrustmaster... I guess One câble is weak again. My next Will Be a Fanatec probably.
Yo i did this and the steps in this comment and my thrustmaster still misscentered a bit to the left, around 35 degrees, i have a TMX with force feedback
Does it matter if the wheel is not physically centred after the startup calibration? What I mean is mine ends up slightly to the right, but its actually reporting it as that e.g. around 51%. I then line it up myself and it says 50%.
If you line it up at the middle and it says 50% then you’re good to go. It’s when you line it up at the middle and it *doesn’t* say 50% that there’s a problem. 😊
@@LMacNeill OK. It doesn't stop at the middle after doing its spin, always to the right, but yeah when I then move it to centre its correctly 50 so all good then. Subtle difference. Wanted to be sure as its an Amazon Warehouse return. Thanks!
You should be able to find it on this page: support.thrustmaster.com/en/cat-wheels-en/ In that list, find the exact wheel you have and click on it. On the page it takes you to, there should be a link to a PC Driver you can click on.
Should work pretty much the same. Turn the wheel all the way to the left, as far as it will go, then plug the USB cable into the port on the XBox One. You shouldn't need any special software or anything.
I got it here: support.thrustmaster.com/en/product/txracingwheel-en/ Scroll down to "Drivers" and click the arrow that's all the way over on the right side of that row. It will show "DRIVERS FORCE FEEDBACK (Package 2019_TTRS_1) + Firmware," with a red download icon on the right side. Click that red icon to download it. Then double-click the file it downloaded (which should be in your Downloads folder) to install the drivers and the updated firmware -- make sure your wheel is *NOT* plugged into your computer until it tells you to plug it in.
@@brandonbeggs5368 Make sure you've installed the most up-to-date firmware on your wheel. Using a Windows PC, go to the link I posted in the previous reply, download the drivers from there, and also click on the "Firmware" line and download the "Firmware - TX Series - Update procedure" file -- follow the instructions in that file to update the firmware after installing the drivers.
@@brandonbeggs5368 Also, make sure you're using it on a PC or XBox game that supports a wheel (most of them do, but a few don't). The wheel is not PS4-compatible, so if you're trying to use it on a PS4, it'll never work...
Yo I got my Thrustmaster TX it feels like I'm fighting the wheel I installed the latest software firmware 58.00 I play this on console feel to hard to control at times
Does the console maybe have a setting for the strength of the Force Feedback it uses? Or maybe there's some Force Feedback settings inside the games themselves?
Yeah, it’s not a permanent fix. Gotta do it each time. Someone in these comments here posted something about some button combination you can press after centering it, to make it permanent? I think? Look around. Gotta be here somewhere.
![Tutorial - Thrustmaster TX-Wheel richtig verwenden [Deutsch]](http://i.ytimg.com/vi/dNMaIZ-9UJ4/mqdefault.jpg)
![Tutorial - Thrustmaster TX-Wheel richtig verwenden [Deutsch]](/img/tr.png)
Directions from thrustmaster guys:
Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
BIG UPVOTE. This worked the first attempt. Thank you so much friend!
Tanks you very much you saved my wheel thanks bro
Yep this worked thanks 🙏🏼
@@MiamiPat awesome man happy it worked for you
@@stefanhdh7259 yeah no problem happy it worked for you
This just fixed all my issues, Thrustmaster were charging me £200 to fix my TX Servo Base. Thank you!!
Bro you're the biggest king in the world THANK YOU SO MUCH!
They need to add this video to the Thrustmaster website aha, thank you so much.
The only step I took from this is video was that i just turned wheel left as far as it go's,unplugged the USB plugged it back in again and the wheel calibrated to dead centre again, easy fix thanks for the video.
Make sure that your racing wheel is perfectly centered ; while holding it in this position, press the: Y, X & MODE buttons simultaneously (FLASH, PIT & MODE buttons on the 458 CHALLENGE GTE wheel & 599XX EVO 30 Alcantara® wheel) (K, N & MODE buttons on the F1 wheel)
May God bless you.
Do you know what buttons for the open wheel add-on?
Now this helped me. Thank you very much!
This worked I put my 599x wheel on and did what u said and it worked than I put my 383 mod wheel back on lol thanks
underrated comment, thanks a lot
This video might be one of the best on youtube, thanks bro
works with the t80 thanks!
this actually worked for my g920 and im confident it will work on g27 thanks man great vid
I SEARCHED SO HARD FOR THIS THANK YOU VERY MUCH
same here
YOU'RE VERY WELCOME!!!
You my man, are a life saver, thank you!!
Just got a new sparco steering wheel add on for my tx base and the wheel was 2-3 degrees out. This video fixed mine. Thanks!
worked on my TX leather edition, thank you so much man
Glad to hear it.
I just had this problem with my TX Leather, THANK YOU
I have the same wheel but which app must i download to fix it?
this video really helped me thanks
I had a problem much like this with my old Logitech Driving Force Pro. It was even centering incorrectly the same way as yours (to the left and the same amount of degrees). I think you fix it there by holding down both pedals (either that or hold Start and Select, I can't remember, lol) as you unplug and replug the wheel.
worked on my xbox series x, thank you!
Also if that doesnt Work, you could turn it all the way to the left until top , then to the right until top , then center it by yourself and press simultaneously Y, X and MODE, my brand new Tx was slightly off and that worked, no problems since I did that.
Oh wow -- I didn't know that trick. I'll have to try it. Thanks!
Yeah this is from thrustmaster its how you sre supposed to re-center it so it stays that way instead of having to do it over and over again lol
@@LMacNeill yeah it's what thrustmatsers handbook says to do lol it will keep it from going out again lol
Worked perfectly - thanks so much!
Have a nice day you saved mine
Did not actually think this would work but thanks man!
Thanks dude I didn’t know it was such a simple fix
[Thrustmaster TX on original Xbox One] For me this trick worked, but turning the wheel all the way right instead of all the way left. Turning it all the way left before calibration did not solved my problem. I think it may depend on where the wheel thinks the center is before recalibrate.
I hadn't even thought of that -- thanks for posting your experiences. Hopefully that'll help someone.
thank you so much man!
Worked on my T500RS, thanks a lot.
I’ve tried everything and it doesn’t work, on f1 2020 it shows -2 degrees when I put it straight. But for me to get it to 0 degrees i have to turn my wheel slightly to the right ( or 2 degrees to the right) I can’t seem to figure out the problem can someone please help this never happened to me. And also my wheel is a f1 add on to the thrustmaster tx servo base.
Saved my life. Thanks.
this actually worked for logitech steering wheel aswell, thank you so much
Thankyou 🎉🎉
Thanks for the fix!!!!
Thank you! 🙌
Whats the tool called
@@nabeelmasood1021 it’s just the settings panel for the Thrustmaster TX. It comes with the windows drivers.
Thanks a lot mate!
Thanks mannnn youre so helpful
What if it happens slowly while playing a game
it worked! thank you so much
its a funny coincidence, i have the same wheel as you
Life saver bro thanks so much
I can't believe this worked!! Thank you so much!
thats normal center for Ferrari
i have a different problem, my wheel starts spinning and never stops
Spot on mate, thank you!
I have it with TX servo base + rally r383 + sim. When it will finnaly center it turns of shifter and hand brake in the game every 15-20 min more or less and you have automatic gearbox. Resterat helps only for 15-20 min or less... :(
Directions from thrustmaster guys:
Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
@@reviewforthetube6485 changing from USB 3.0 to 2.0. helped. Centering did not solve the problem at all but thanks for comment. I was in contact with Thrustmaster regarding this issue.
@@187HC that sucks man wow
hero
Thanks worked
Thank you
What about if it up and happens during game play?
Worked on my wheel, pedals are still not working.
Didnt work for me
thank you👏
thanks!
Please bro help i followed these steps on my t300 and it still misaligned :(
Never mind man! Fixed it! Thank you so much!!
Stay safe brother
how did you fix it? im having the same problem on my t300rs
Alright
So basically, with your wheel on and plugged into a PC, you must PERFECTLY centre the wheel as BEST as you can with your eyes. Try and get it PERFECT.
Now if you have the regular stock T300RS wheel, with the rim centered as best as possible, you want to SIMULTANEOUSLY press the ST, SE and MODE button together. The racing wheel's LED briefly changes colour, then reverts to its initial colour.
This means that the wheel's center value has been reset and automatically saved to the device's internal memory (you do not need to repeat the procedure every time you connect the racing wheel); this applies to all of the wheels (PS, GT, F1, 458 GTE, etc.).
If you are on the GTE wheel or Ferrari Alcantara Wheel,
For GTE and Ferrari Alcantara Wheel, press RADIO, RIGHT SHIFT PADDLE and MODE simultaneously.
Hope this helps man!
Directions from thrustmaster guys:
Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol
Te amo bro
I don't have the wheel... But still thanks for teaching!
i have the same problem on my t150 i tried this and it didnt work someone pls help
Here are the directions it works on every thrustmaster wheel. You need plug it in to either the ps3 ps4 or the pc and wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again lol.
Hi I have the Thrustmaster t80 what can I do?
Did you try the procedure in this video anyway? It has worked for a great many models of steering wheel.
Also, someone below posted the following, which has worked for some people:
"wait for the auto center start up as it always does when turning it on. Then when it is done you turn the wheel all the way to the left until stop. Then all the way to the right until stop. Then you re-center the wheel yourself and then you press start, select, and mode all at the same time. You should be good to go. I've never seen it not work and after this it shouldn't happen again"
Hopefully at least one of these procedures will work for you.
I have the same one as this but my force feedback keeps disconnecting mid race. Does anyone know a fix?
Did you manage to fix your problem? I have the same now :/
Please bro help i followed these steps on my t300 and it still misaligned :(
Sorry -- I've never had it not work for me. :-(
Just solved this problem. On All Thrustmaster wheels exist combination of 3 buttons, which allows to recenter ur wheel
There is an instruction drive.google.com/file/d/1fyoIw5fb5dvC8D8DDRDFl4uhyPHRv7tZ/view?usp=sharing
Led Soil answer is right, unfortunately (and absolutely not normal) i used to do it everytime before playing with my wheel during 2 Last year... Now nothing is fixing the issue, never centered whatever i can do. I'm tired with this Thrustmaster... I guess One câble is weak again. My next Will Be a Fanatec probably.
@@amigahonda4597 so sry for u, man, I know this feeling. I will never buy trustmaster again. Hope ur problem will solved in the nearest future
Yo i did this and the steps in this comment and my thrustmaster still misscentered a bit to the left, around 35 degrees, i have a TMX with force feedback
Does it matter if the wheel is not physically centred after the startup calibration? What I mean is mine ends up slightly to the right, but its actually reporting it as that e.g. around 51%. I then line it up myself and it says 50%.
If you line it up at the middle and it says 50% then you’re good to go. It’s when you line it up at the middle and it *doesn’t* say 50% that there’s a problem. 😊
@@LMacNeill OK. It doesn't stop at the middle after doing its spin, always to the right, but yeah when I then move it to centre its correctly 50 so all good then. Subtle difference. Wanted to be sure as its an Amazon Warehouse return. Thanks!
🙏🙏🙏
Whats the tool called
You should be able to find it on this page: support.thrustmaster.com/en/cat-wheels-en/
In that list, find the exact wheel you have and click on it. On the page it takes you to, there should be a link to a PC Driver you can click on.
I looked across all of Logitech's websites downloaded their utility tool and couldn't find the answer. I found this and it was this easy?!
How do you do it for Xbox one
Should work pretty much the same. Turn the wheel all the way to the left, as far as it will go, then plug the USB cable into the port on the XBox One. You shouldn't need any special software or anything.
😆😆😆😆😆😆😆😆😆😆 THANK YOU
Where did you get that application for your wheel??
I got it here: support.thrustmaster.com/en/product/txracingwheel-en/
Scroll down to "Drivers" and click the arrow that's all the way over on the right side of that row. It will show "DRIVERS FORCE FEEDBACK (Package 2019_TTRS_1) + Firmware," with a red download icon on the right side. Click that red icon to download it. Then double-click the file it downloaded (which should be in your Downloads folder) to install the drivers and the updated firmware -- make sure your wheel is *NOT* plugged into your computer until it tells you to plug it in.
My tmx thrust-master wheel does not turn my car in game what can that be
@@brandonbeggs5368 Make sure you've installed the most up-to-date firmware on your wheel. Using a Windows PC, go to the link I posted in the previous reply, download the drivers from there, and also click on the "Firmware" line and download the "Firmware - TX Series - Update procedure" file -- follow the instructions in that file to update the firmware after installing the drivers.
@@brandonbeggs5368 Also, make sure you're using it on a PC or XBox game that supports a wheel (most of them do, but a few don't). The wheel is not PS4-compatible, so if you're trying to use it on a PS4, it'll never work...
Its forza horizon 4
Yo I got my Thrustmaster TX it feels like I'm fighting the wheel I installed the latest software firmware 58.00 I play this on console feel to hard to control at times
Does the console maybe have a setting for the strength of the Force Feedback it uses? Or maybe there's some Force Feedback settings inside the games themselves?
I did this it worked but it goes by to uncenter when i boot my pc again im using the same base the tsx
Yeah, it’s not a permanent fix. Gotta do it each time.
Someone in these comments here posted something about some button combination you can press after centering it, to make it permanent? I think? Look around. Gotta be here somewhere.
@@LMacNeill yes its pit flash mode and it fixed it for me on the 599xx
Thank you so much for this
Thanks dude
Thanks a lot dude
Thank you!!
thanks!