(Edited on 15.6.21 : Before recording to track 3, switch out the OSC BOT for a Granular Delay with the settings below. Instead of humming, do a short liproll) *ALL EFFECTS : This is important, as the song will not come out the same way if you don't follow these exactly* *INPUT EFFECTS * ------------IFX Bank A-------------- A: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 100 Sequencer Settings Step Rate : 1/16th note, Step Max : 4 Notes : Eb4, B3, F#4, B3 B: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 50 Sequencer Settings Step Rate : 1/16th note, Step Max : 4 Notes : E4, B3, G4, B3 C: Distortion, Type "METAL", Tone 0, Dist 50, D. Level 0, E. Level 50 D: Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 50 ------------IFX Bank B-------------- A: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 100 Sequencer Settings Step Rate : 1/16th note, Step Max : 16 Notes : B4, B3, A4, B3, Ab4, B3, A4, B3, Ab4, B3, E4, B3, F#4, B3, Eb4, B3 B: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 50 Sequencer Settings Step Rate : 1/16th note, Step Max : 4 Notes : E4, B3, Eb4, B3 C: Distortion, Type "METAL", Tone 0, Dist 50, D. Level 0, E. Level 50 D: Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 50 ------------IFX Bank C------------ A: Dynamics, Type "Low Boost", Dynamics +20 B: EQ : Lo Gain +4db, High Gain +10db, Low-Mid Gain +2db, High-Mid Gain +2db, Level 0db C: EQ : Lo Gain -20db, High Gain 0db, Low-Mid Gain 0db, High-Mid Gain 0db, Level +5db D(1): Delay, Time 200ms, Feedback 0, D. Level 100, Lo Cut "FLAT", Hi Cut "FLAT", E. Level 50 D(2): Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 23 ------------IFX BANK D------------ A: LPF, Rate 0, Depth 50, Resonance 50, Cutoff 17, Step Rate "OFF" B(1): Osc Bot, Type "SAW", Tone 0, Attack 50, Note "B1", Mod Sense 0, Balance 100 B(2): Granular Delay, Time 58, Feedback 100, E. Level 40 C: Transpose, Mode "1" Sequencer Settings Step Rate : 1/4th Note Step Max : 16 Values : 0, -12, -12, -12, -12, -12, -12, 0, 0, -12, -12, 0, 0, -12, -12, 0 D: EQ, Lo Gain "+10db", Hi Gain "0db", Lo Mid "0db", Hi Mid "0db", Level "+18db" ------------TFX BANK A------------ A: Vinyl Flick, Flick 20 B: (Not Used) C: (Not Used) D: (Not Used) ------------TFX BANK B------------ A: Osc Bot, Osc "Square", Tone 0, Attack 50, Mod Sense 0, Balance 100 Sequencer Settings Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice) Step Max : 12 Notes : B1, B1, B1, A1, G1, F1, B1, B1, B1, B1, B1, B1 B: Distortion, Type "DS", Tone 0, Distortion 50, D. Level 0, E. Level 50 C: Stereo Enhance, Lo Cut "FLAT", Hi Cut "FLAT", Enhance 50 D: Chorus, Rate 50, Depth 50, Lo Cut "FLAT", Hi Cut "FLAT", D. Level 100, E. Level 50 (TFX Bank C goes Unused here) ------------TFX BANK D------------ A: Osc Bot, Osc "Square", Tone 0, Attack 50, Mod Sense 0, Balance 100 Sequencer Settings Step Rate : 1/4th note, Step Max : 16 Notes : B2, B4, B2, B2, E3, E5, E3, E3, A2, B4, A2, A2, D3, D5, C3, C3 B: Distortion, Type "DS", Tone 0, Distortion 100, D. Level 0, E. Level 70 C: Transpose, Mode 1 Sequencer Settings Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice) Step Max : 12 Values : 0, 0, 0, +12, +12, 0, 0, +7, 0, 0, -12, -12 D: LPF, Rate 0, Depth 100, Resonance 50, Cutoff 50, Step Rate OFF Sequencer Settings: Target : Cutoff Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice) Step Max : 12 Values : 90, 50, 40, 90, 50, 90, 90, 90, 90, 0, 60, 70
Thanks man, good to see you here! Another commenter pointed that out to me on the cover video, but I had already recorded the tutorial at that stage, so it was too late to fix it. Looking forward to tomorrows video!
For anyone having trouble with the bassline, I’ll give my settings, I think they work quite well. Effect A: GNR Delay Time 58 Feedback 100 E Level 50-100 Effect B: LPF Rate: 0 Depth: 0 Resonance: 0 Cutoff: 50 Step Rate: Off Effect C: Pitch Bend Pitch: -1OCT Bend: 0 (You will alter this from 0-100 with the INPUT FX Knob) Mode: 2 And then for Track FX, switch A for a Filter. LPF Rate: 2 Meas Depth: 100 Resonance: 0 or 50 (I use 50 and it sounds fine) Cutoff: 0 As always I know it’s very late, but thank you for the tutorial Edmaster!
I'll put it on the list, right now it's looking like this 1. Bizkit - That Looper 2.0 (There won't be a tutorial on this one, as Bizkit said no) 2. Robin - I am a Lion 3. BreZ - Aerodynamic 4. Rythmind (feat. Chris Theodian) - Back in Black
Hey, Actually i think in the first drop, the effect is not vinil flick. but LP Filter on A and the Osc Bot on B, when you get the filter right, it sounds just perfect
@@EdmasterBBX wassup, im back here, LPF with rate-2 measures, depth-70, resonance-0 and cutoff about 20 is good, you can replace the filter with stereo boost
I Believe he uses Pre Amp, extreme lead, 4x10 , 50 gain, 10 t comp, 25 bass, the rest is the basic and this instead of the input dist But once again this is very good, needs some minor changes but your on the right track !! Keep it up
So what i understand is at 2:44 you recorded the track effect into it self, right? if that is true, how do you do that? what setting do i need to tweak, to have my loop record its own trackeffect? Amazing video btw. just got my mk2 and being a daw producer, i have a bunch of ideas that i just havent been able to make work yet :D
Sometimes i dont get to hear the FX as loud and clear as its shown in the video. Same happens with Osc Bot and G2B. Could it be my headphones? Or is there some setting im overlooking?
Hi ! Thanks for this tuto, it's pretty good ! But i got a pb with the last drop. I don't have the same result even if i copy your settings. The Track 4 had to be reversed again ? With the undo ? Even if i try all settings, i have no variations on the last drops :'( Any help ? Sure it's 1/4 (𝅘𝅥 ) for Osc Bot and 1/8 for the others ? (𝅘𝅥𝅮 )
Is there an update on how he made his bassline with granular delay? Can't seem to find the proper settings that he might be using. On my side everything with granular delay and changing pitch sounds really bad ^^
Everything is the same besides the Osc Bot. 1. Swap it out with a granular delay, Feedback 100, and Time 58. 2. Do a liproll into the mic (or kick, but liproll works best)
To turn on the sequencer, go to the osc bot effect, tap right twice, and you should see a button that says "Sw Off". Change that to on. Tap right one more time and you'll be on the sequencer page. Robin has a tutorial on using the osc bot, it's here ruclips.net/video/8p6jJx4jD_0/видео.html
(Edited on 15.6.21 : Before recording to track 3, switch out the OSC BOT for a Granular Delay with the settings below. Instead of humming, do a short liproll)
*ALL EFFECTS : This is important, as the song will not come out the same way if you don't follow these exactly*
*INPUT EFFECTS *
------------IFX Bank A--------------
A: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 100
Sequencer Settings
Step Rate : 1/16th note,
Step Max : 4
Notes : Eb4, B3, F#4, B3
B: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 50
Sequencer Settings
Step Rate : 1/16th note,
Step Max : 4
Notes : E4, B3, G4, B3
C: Distortion, Type "METAL", Tone 0, Dist 50, D. Level 0, E. Level 50
D: Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 50
------------IFX Bank B--------------
A: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 100
Sequencer Settings
Step Rate : 1/16th note,
Step Max : 16
Notes : B4, B3, A4, B3, Ab4, B3, A4, B3, Ab4, B3, E4, B3, F#4, B3, Eb4, B3
B: Osc Bot, Osc "Saw", Tone 0, Attack 50, Mod Sense 0, Balance 50
Sequencer Settings
Step Rate : 1/16th note,
Step Max : 4
Notes : E4, B3, Eb4, B3
C: Distortion, Type "METAL", Tone 0, Dist 50, D. Level 0, E. Level 50
D: Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 50
------------IFX Bank C------------
A: Dynamics, Type "Low Boost", Dynamics +20
B: EQ : Lo Gain +4db, High Gain +10db, Low-Mid Gain +2db, High-Mid Gain +2db, Level 0db
C: EQ : Lo Gain -20db, High Gain 0db, Low-Mid Gain 0db, High-Mid Gain 0db, Level +5db
D(1): Delay, Time 200ms, Feedback 0, D. Level 100, Lo Cut "FLAT", Hi Cut "FLAT", E. Level 50
D(2): Reverb, Time 1.8s, Pre-Delay 0ms, Density 4, Lo Cut "Flat", Hi Cut "FLAT", D. Level 100, E. Level 23
------------IFX BANK D------------
A: LPF, Rate 0, Depth 50, Resonance 50, Cutoff 17, Step Rate "OFF"
B(1): Osc Bot, Type "SAW", Tone 0, Attack 50, Note "B1", Mod Sense 0, Balance 100
B(2): Granular Delay, Time 58, Feedback 100, E. Level 40
C: Transpose, Mode "1"
Sequencer Settings
Step Rate : 1/4th Note
Step Max : 16
Values : 0, -12, -12, -12, -12, -12, -12, 0, 0, -12, -12, 0, 0, -12, -12, 0
D: EQ, Lo Gain "+10db", Hi Gain "0db", Lo Mid "0db", Hi Mid "0db", Level "+18db"
------------TFX BANK A------------
A: Vinyl Flick, Flick 20
B: (Not Used)
C: (Not Used)
D: (Not Used)
------------TFX BANK B------------
A: Osc Bot, Osc "Square", Tone 0, Attack 50, Mod Sense 0, Balance 100
Sequencer Settings
Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice)
Step Max : 12
Notes : B1, B1, B1, A1, G1, F1, B1, B1, B1, B1, B1, B1
B: Distortion, Type "DS", Tone 0, Distortion 50, D. Level 0, E. Level 50
C: Stereo Enhance, Lo Cut "FLAT", Hi Cut "FLAT", Enhance 50
D: Chorus, Rate 50, Depth 50, Lo Cut "FLAT", Hi Cut "FLAT", D. Level 100, E. Level 50
(TFX Bank C goes Unused here)
------------TFX BANK D------------
A: Osc Bot, Osc "Square", Tone 0, Attack 50, Mod Sense 0, Balance 100
Sequencer Settings
Step Rate : 1/4th note,
Step Max : 16
Notes : B2, B4, B2, B2, E3, E5, E3, E3, A2, B4, A2, A2, D3, D5, C3, C3
B: Distortion, Type "DS", Tone 0, Distortion 100, D. Level 0, E. Level 70
C: Transpose, Mode 1
Sequencer Settings
Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice)
Step Max : 12
Values : 0, 0, 0, +12, +12, 0, 0, +7, 0, 0, -12, -12
D: LPF, Rate 0, Depth 100, Resonance 50, Cutoff 50, Step Rate OFF
Sequencer Settings:
Target : Cutoff
Step Rate : 1/8th note 3 (1/8th note, then turn knob right twice)
Step Max : 12
Values : 90, 50, 40, 90, 50, 90, 90, 90, 90, 0, 60, 70
At last, there are 13 numbers while "Step Max" is 12.
Could you correct it?
@@水音-f8q fixed, thanks for bringing that to my attention!
you wrote "D:" instead of "A:" in TFX BANK D @Edmaster Music . love you tutorials btw, keep making more of them!!!
@@mohamed-amineabarkan6eme633 thanks for pointing that out bro!
Nice one ;). His bassline is done with a Granular delay btw :D
Thanks man, good to see you here! Another commenter pointed that out to me on the cover video, but I had already recorded the tutorial at that stage, so it was too late to fix it. Looking forward to tomorrows video!
Nice new jam brez.... ps my mk2 has now arrived....
For anyone having trouble with the bassline, I’ll give my settings, I think they work quite well.
Effect A: GNR Delay
Time 58
Feedback 100
E Level 50-100
Effect B: LPF
Rate: 0
Depth: 0
Resonance: 0
Cutoff: 50
Step Rate: Off
Effect C: Pitch Bend
Pitch: -1OCT
Bend: 0 (You will alter this from 0-100 with the INPUT FX Knob)
Mode: 2
And then for Track FX, switch A for a Filter.
LPF
Rate: 2 Meas
Depth: 100
Resonance: 0 or 50 (I use 50 and it sounds fine)
Cutoff: 0
As always I know it’s very late, but thank you for the tutorial Edmaster!
Omg, i was looking for tutorial of this track for so long, thank you sir, you are the best❤️
Glad I could help!
Super cool to see the process! Appreciate your time, knowledge, and a big heart to share! Thanks!
You're awesome ! Now I'll showcase for my friends and they will think I'm that good with looping x))
From Japan.
Thank you.
Great! Thanks for making this tutorial.
GREEEEAT!!! Now we want to hear AC/DC back in black the way rythmind did it with Chris theodian
I'll put it on the list, right now it's looking like this
1. Bizkit - That Looper 2.0 (There won't be a tutorial on this one, as Bizkit said no)
2. Robin - I am a Lion
3. BreZ - Aerodynamic
4. Rythmind (feat. Chris Theodian) - Back in Black
@@EdmasterBBX wow a good list ! And you will be doing all of them? That's amazing bro!
Hey, Actually i think in the first drop, the effect is not vinil flick. but LP Filter on A and the Osc Bot on B, when you get the filter right, it sounds just perfect
Oh you're right, it could be. I had been trying to figure it out if it was, but I could never find the right settings, thanks for your help!
@@EdmasterBBX wassup, im back here, LPF with rate-2 measures, depth-70, resonance-0 and cutoff about 20 is good, you can replace the filter with stereo boost
@@ATomBeatbox damn man, thats kind af, thanks for telling me! I’mma try this out!
OMG THANKS SO MUCH i came from the reply section lmao
I Believe he uses Pre Amp, extreme lead, 4x10 , 50 gain, 10 t comp, 25 bass, the rest is the basic
and this instead of the input dist
But once again this is very good, needs some minor changes but your on the right track !!
Keep it up
Yeah I realised this after I had recorded the tutorial, and I didn't have the time to change it. I appreciate the feedback!
So what i understand is at 2:44 you recorded the track effect into it self, right? if that is true, how do you do that? what setting do i need to tweak, to have my loop record its own trackeffect? Amazing video btw. just got my mk2 and being a daw producer, i have a bunch of ideas that i just havent been able to make work yet :D
i believe vinyl flick is one of the fx that can be overdubbed into a track
shit great tutorial man alot of effort there. make some more tutorials and try other things to get viral because you deserve it.
yes the tuto
Not bad. I like it.
oh what⁉️ How did you do that？！！god so nice！！！
WOOOW! Thank you!!!!
No problem! Check back in approx 20 minutes for the full settings of the effects
@@EdmasterBBX please more tutorials🙏 It's so helpful)
@@alexshtapura2585 Definitely! When I learn a new track you'll all be the first to know how to do it
@@EdmasterBBX much thanks bro🙏
I still need to get a mk2
Please do a tutorial on Rythmind's Back To The Underground
I might, but I want to try different beatboxers tracks right now. In the meantime, Rythmind has a tutorial on Swissbeatbox if that helps
oh yeah what do you mean by delay + reverb
Good question.
So you start the track off with slot D on Delay, but you'll change it to a reverb in the middle of the song
@@EdmasterBBX ohh ok ok thx!
Thanks 🙏
Sometimes i dont get to hear the FX as loud and clear as its shown in the video. Same happens with Osc Bot and G2B. Could it be my headphones? Or is there some setting im overlooking?
Hi !
Thanks for this tuto, it's pretty good ! But i got a pb with the last drop.
I don't have the same result even if i copy your settings. The Track 4 had to be reversed again ? With the undo ? Even if i try all settings, i have no variations on the last drops :'( Any help ?
Sure it's 1/4 (𝅘𝅥 ) for Osc Bot and 1/8 for the others ? (𝅘𝅥𝅮 )
omg thanks！！
Am i the only one that doesnt have distortion i got my rc505 mk2 like a week ago and i looked thru all the fx and i did not see distortion
What does step rate: 1/16 note mean? Is it like 16 on the MkII ?
It's the semiquaver note, I couldn't find it in text form
teach me how to configure each of the effects please
If you need settings, they're in the pinned comment my man
私のMK-2にはnoteしかありません
何故ですか？
Is there an update on how he made his bassline with granular delay? Can't seem to find the proper settings that he might be using. On my side everything with granular delay and changing pitch sounds really bad ^^
Everything is the same besides the Osc Bot.
1. Swap it out with a granular delay, Feedback 100, and Time 58.
2. Do a liproll into the mic (or kick, but liproll works best)
the settings of the effect
OH yes, my fault, I'll post that ASAP
Effects are up now! Sorry for the delay!
@@EdmasterBBX where
@@Leon-R-O5 pinned comment
@@EdmasterBBX thank you
lol this is valley in another acc i subbed with 2 acc cuz u cool af
Haha, I appreciate it very much, thank you!
how do you get 2 effects on ifx d bank c??
he has 2 fx set up for that effect
Hi ! Sick tutorial!! For some reason the osc bot does not work for me like it is supossed to. Could you explain the settings for the notes?
Hi mate, which Osc Bot is it? Input FX or Output FX?
Also remember to double check if the sequencer is on or off, that might help
@@EdmasterBBX I have the Osc bot input effect triggered, but don't know where to set the notes. How do I check if the sequencer is on?
To turn on the sequencer, go to the osc bot effect, tap right twice, and you should see a button that says "Sw Off". Change that to on. Tap right one more time and you'll be on the sequencer page.
Robin has a tutorial on using the osc bot, it's here
ruclips.net/video/8p6jJx4jD_0/видео.html
What is the tempo?
That, and all the extra details, are at 2:04
Ouuu sorry bro, I didn't see this because i was very exciting with the melody jajja