Thank you for watching my video. I use a grinder to adjust the Mimi part of the Kanna blade. In the future, I plan to make and post a comprehensive video on how to adjust the entire blade section.
I like the practical perspective. I agree it is important for the tools to be useful in the work place and fun. Thanks for the explanations of your methods. You have a beautiful collection of kanna, they look very loved.
Thank you very much.🙏 I try to make daily adjustments as easy as possible, because if I am too particular about adjustments and they become complicated, daily hand tool adjustments become a hassle and I become lazy to use hand tools. For me, if I can make adjustments easily and get good results, my daily work becomes more enjoyable. The hand tools in the video are my partners.
It is always nice when you answer one of my questions before I can ask it! I am going to make some ichimai kanna with blades I have made and wanted to know how to get the best performance. Thank you!
I do not often use hard woods such as hardwoods. I sometimes use oak, but rarely plane it. When planing zelkova, I sharpen the blade at a slightly steeper angle than 30 degrees. The angles are done by intuition.
It is a strange feeling to have someone in the world who can share the same memories, but at the same time, it is also reassuring. Thank you very much.🙏🙏
勉強になります🙇
この前初めて鉋を買いました。使いこなせる用に練習します。
動画を見てくれてありがとうございます。
二枚鉋ならば、差し当たり刃同士を隙間なく合わせることができれば、刃に関しての調整は、そこまで難しくは無いと思います(ある程度の熟練は必要ですが、それは練習すればクリアできます)
私の考えでは、台の仕込みの硬さや、刃口の調整が難しいと思います。
新しい鉋との時間を楽しんでください!
いつ拝見しても美しい。
世界に誇れる「日本の大工」
ご自身の道具を育てながら腕を磨く大工。他力本願ですが、誇らしく思います。ゴールの無い職人の心意気に頭が下がります。
凄く参考になります!私もかんながけ、研ぎ未熟なので頑張りたいです!
動画を見てくれてありがとうございます。
私も、まだまだ自分の中で納得できていない部分も有りますが、自分で色々試しながら練習するのはとても楽しいです。
私の動画が、参考になれば、とても幸いです。🙏🙏
Again, thank you so much for your ideas on sharpening. These videos are very helpful and make me think about better ways to use my chisels and planes
Thank you for watching my video.
The content of this video is just my personal method of posting, but if it was helpful to you, I am very happy too.
Thank you very much for all the information you share. Could you show sometime how you are adjusting mimi? It looks very nice and even on your blades.
Thank you for watching my video.
I use a grinder to adjust the Mimi part of the Kanna blade.
In the future, I plan to make and post a comprehensive video on how to adjust the entire blade section.
Thank you very much Kokichi-san. I am truly looking forward to the blade adjustment video. Your explanations are very detailed and helpful.
I like the practical perspective. I agree it is important for the tools to be useful in the work place and fun. Thanks for the explanations of your methods. You have a beautiful collection of kanna, they look very loved.
Thank you very much.🙏
I try to make daily adjustments as easy as possible, because if I am too particular about adjustments and they become complicated, daily hand tool adjustments become a hassle and I become lazy to use hand tools.
For me, if I can make adjustments easily and get good results, my daily work becomes more enjoyable.
The hand tools in the video are my partners.
Thank you so much for the video! Your collection is just priceless
Thank you for watching my videos.
It took me a long time to collect the planes I use.
I love them all.
Very helpful, thank you so much kokichi-san!
Thank you very much 🙇♂️🙇♂️
It is always nice when you answer one of my questions before I can ask it! I am going to make some ichimai kanna with blades I have made and wanted to know how to get the best performance. Thank you!
Thanks for watching my video.🙏
Ichimai kanna is very difficult to adjust haguchi.
In any case, have a great time with your hand tools.😊🙇♂️🙇♂️
沢山ありますねー!鉋屑1本に繋がるこれ、凄いです!研ぎ!ナイフでやってみたのですが全然切れませんでしたww!残念…。切れる様になるまでやってみます!😤
鉋も、まだ、ここに並べきれなかった鉋達が有ります。
同じ種類の鉋でも、仕事で何丁も使い回しながら仕事するので、どうしても数が増えてしまいます。
研ぎは、練習している時が一番楽しいですよね。
色々、工夫したり、試したことのない方法を考えたりしている時間が最高に楽しいです。🙇♂️😊
It was fun untill I work on very hard wood like iron wood. Any advice to use kanna for hardwood? Thank you
I do not often use hard woods such as hardwoods.
I sometimes use oak, but rarely plane it.
When planing zelkova, I sharpen the blade at a slightly steeper angle than 30 degrees.
The angles are done by intuition.
@@chantarokichi5360 thank you. My new plane blade just arrived, I will try.
この時代に、削りものさせてもらえる環境に感謝ですね。
日本の中の大工が、どれだけ鉋を使いこなせるのか?😆
有難うございます。
私は仕事運が、良いんでしょうね。
私自身も、これからも頑張って行きたいと思います。
お疲れ様です。そこに愛は、ありますね!僕も鉋好きです。
破風板の眉(本眉)をかく鉋お持ちですか?
鉋が大好きな方は、本当に多いですよね笑
もちろん私もですが笑笑
私は、破風板の眉は、丸鋸と、小穴カッターでしゃくったあと、五徳鉋を改造して「反り五徳鉋」にしたものを使用しています。
ですので、破風板専用の鉋は使用していません🙇♂️
@@chantarokichi5360 ありがとうございます。五徳鉋の改造されたの動画にでてましたね。流石です。m(_ _)m
刻みの仕口、継ぎ手、きれいな鉋仕上がり、さすがだと何時も思ってます。大きい節もものともされてませんね!(-ω☆)
最後が変態っぽくて良いですね❗
最後まで見てくれてありがとうございます。
枕元に鉋を置いて寝ると、気になって寝られなくて、何度も上に手を伸ばして結局鉋を眺めてしまっていたのを思い出しますね😂😂
兵庫の鉋、新潟の鉋どちらがおすすめあったりするでしょうか?
私は、ほとんどオークションで中古の鉋を購入して使用しているので、最近の作者の作風にかんしては、ほとんど知りません🙇♂️
ですので、現代工の知識は、10年前からアップデートして無い感じです笑
昭和終わり頃から、平成半ばくらいまでは地方色が残ってた様に感じますが、現在は、産地による違いは、あまり無いように感じます。
鍛冶屋個人ならば、現在製作している方の中では、私は「圭三郎」さんは、良いなぁと思ってます。
凄くいいこと教えて下さりありがとうございます!!参考になります!
@@ロトの紋章-t3s 私の、適当な感想なので、話半分で聞いてください笑笑
Sleeping as a boy with carpentry tools in your bed and enjoying the feel of them in the hand was a joy to me and it seems you also 😃
It is a strange feeling to have someone in the world who can share the same memories, but at the same time, it is also reassuring.
Thank you very much.🙏🙏
Thank you for the video
Thank you very much 🙏🙇♂️🙏
Arigato goaimashita
Thank you very much 🙇♂️🙇♂️
お疲れ様です。
たまには、笑った〔ニヤけた)顔でも見せてください。
お疲れ様です!
普段は、だいたいふざけた顔してるんですけど、動画ではなかなか難しいですね笑笑