Super easy if you follow instructions and watch the video closely. Got it on the first try and it looks so good you can’t even tell it’s on there. Thanks!
Bizarre so many are having trouble with this. I watched the video once and had a perfect application on my first try. I'm actually really impressed with the results - you cannot tell it's on, except for the slightest soft/tacky feel if you tap your fingernail to the screen. This beats the hell out of the wet-application watch protectors I've used in the past.
I almost burst into tears with anger doing this. I used 4 before I figured it out. It’s in two pieces and the thing you stick first is the cover, not the other way around. Great when it works but not for the feint hearted.
I think I know where everyone is getting confused.. on tab 2, the plastic is supposed to lift. It feels like you’re pulling the protector off however halfway you will hit a green pattern on the watch. This is where you push the air bubble remover forward while holding tab 2 and repeat for number 3. It’s not very well explained in the video so I get that’s how people are confused. However, when the protector is on you can hardly notice it.
Watch out, you do a good job putting it on one time and next thing you know you're the guy in the family who has to put everyone's screen protectors on from then on.
Worked great the first time. Thank you. A little tip: Have everything taken out and ready. Leave the alcohol wipe on while you pick up the cloth. Leave the cloth on while you pick up the dust absorber, and leave that on while you pick up the covered film. Keep the screen covered because dust is like Jurassic Park dinosaurs…”it will find a way”!
This one is tricky it wasn’t until the second one that I realized you need to peel the bottom and not the top off when you pull number one the top is connected to number four and meant to align the center and is the “wax paper” for the bubble remover to go over before you take it off
This is the best screen protector for apple watch. I have a series 6 but I have used LK screen protectors since series 4. I have to say, this design is so much better than the original LK design. I wasted 2-3 with the the old protectors in the yellow/black package. This new design in blue/black package is great! The round sticky holder works perfectly - just don’t use it on an expensive dining room table (LOL!). It does get a little confusing after step 1, but if you watch the video a couple of times, you’ll get it. The video is exactly how it works. I hope they keep making these for series 7 watch and beyond!
It's the best fitting protector I ever installed, worth the extra time to setup, saved time later as no bubbles or lint getting stuck! I couldn't believe I did it first try, it's so hard to see the protector on that I had to verify under light to see the second layer
I am so happy I looked at the comments before doing this because now I only used one instead of the whole pack So thanks to all of you sacrificed so that you could help the others
This is great. it came with a bunch of screen protectors- and I finally got one on that I was satisfied with, after a couple tries. After several months of wearing one, it started to peel off from regular everyday use and hitting the gym. Anyway, I just now replaced it with one of the spares left. And honestly, this is great, im so happy with this purchase because the best part is i have 2 extra spares left. Thank you LK!
I’ve done it on the first try, was not as easy as it look on the video but still doable. Just take your time and rewatch if you’re not sure. I have two tiny bubbles but you can’t see them when the screen is turned on
I did it in 3. The bumper I put on messed up a corner of the protector first two times, but the film went on okay. The third attempt also lifted the film, but I can live with it.
@@m.n.r4222 hey man , me also failed 4 times already to install it on the watch. I got 2 more tries, will try in few days but i'm nervous as hell. This is pretty tough (I had someone else try to help me as well, they failed same as me)
I can't believe I bought into getting a screen protector done at one of those booths at the mall, for $25, when for roughly the same price I got a whole pack of these from LK. And they are so easy to install; thanks to the well made and clear video instructions and innovative product design (no idea though if LK came up with the design, either way it works quite well). I'll have to see how long each screen protector lasts, please respond to this message if it's been a few months or years and l'll surely reply and let you know how well they faired to relatively rough use (I commute with a knapsack and very often have the strap of my bag rub against my wrists, and I bike in all weather conditions, even well bellow freezing temperatures or the hottest days of the year in Toronto, so my devices have to put up with a lot of conditions.)
@@pennym1056 They don’t last too long, I’m trying to remember how long because I’ve now forgotten to put one back on after a hand full of months, getting damaged makes corners start peeling. With how rough my workplace use can be I got tired or replacing them.
Succeeded on first try! Really helpful video, paused between the steps to copy the step. Watched the screen closely to check if all the bubbles were pressed out. When I was finished, I did have a line in the middle of the screen. Someone said you can press this one out with your fingers though. I don't see the line when the screen is always on, so I don't mind. The alcohol pad is really juicy which is nice, cleaned my phone and tablet with it too. If you get some gunk of the foam glue on the table like I had on my glass table, you can use the alcohol pad to clean it. Cleaned some other spots on the table with it as well.
There’s a bit of a learning curve. It took me 2 tries but I got it in the end! Definitely watch and listen carefully. I recommend watching in its entirety first. Then watch it again and applying while watching the video, stopping it if you have to.
Worked great. Watched the video...first one installed great. Took a min to realize you need the green middle section to come off to get it. Glad there’s 6 but for now...only needed one.
Literally took me fucking up the first one then taking a second one apart layer by layer to figure it out for the third on the video is a waste of time. This was 6 months ago you posted this was the protector any good?
Bought one of these on amazon a week ago and theyre great, took me 2 tries to get it right. Havent tried it with a case on yet but looks good right now
Honestly... once you get it down it’s a great investment. Took me about two wasted to figure it out but then I had the same protector on for a year. Came back because I forgot how to do it and I needed to change it out.😂
@@martinorozco6759 Just started coming up on the corner a bit. I don’t have a bumper in my watch and I’m pretty reckless with it so making a year is solid for me.
Awesome screen protectors. Had some for my series 3 and got these for my dad. Literally flawless installation everytime. Just redid it and no bubbles whatsoever. (Not paid btw, just sharing my experience)
Much better that the old video and protectors I used a few years ago of the same product. It's not unusual for me to have to do it twice and this was no exception had a bit of dirt I didn't see until the end.
This was very easy, though worth emphasising that when they say "lift tab 2", they *really* mean lift it, as in lift until the hard plastic can be pushed away from the watch using the squeegee (hint: you want it almost vertical, then when you push with the squeegee you'll see the bottom of the hard plastic attached to the tab move away from the film itself).
I love looking at the comments and seeing people complaining and saying this is a waste of money. Maybe you don't know how to follow directions? First try and it was perfect for me.
The product application process is poorly designed. You took a risk of dust getting on the sticky underside and warping the protector when you applied it. As that is the only way to apply it because of the plastic flaps. It's an ineffecient and not a consumer friendly install design. That's why there's a bunch of angry comments and bad reviews and why only a small handful of people agree with you. You love the comments because you think you are better than the ones complaining. That's your mistake. You are not better than them. You assumed they didn't follow directions. Another mistake. We need less comments like this on the internet. Thanks.
Just installed my second one after quite a few months of protection (can't remember when I put it on). I did use two the first time but this time just one. Instructions aren't the best but protector lasted.
-Perfekt!! Sehr gutes Erklärungsvideo zur Installation der 44mm Apple Watch Displayschutzfolie. Wenn Sie den Schritten nacheinander folgen, ist der Protektor perfekt. Danke vielmals.
Then can you maybe put the comments in laymen's terms? The video tells me to {pull of tabs" but then the tabs just...disconnect and nothing peels off. I think maybe you can explain it better than the company can if you were able to do it, because their instructions just plain DO NOT work.
Kenny it’s kind of like a bandaid. When you pull the tab up it’s supposed to come up but you have to use the squeegee and move it towards the end you just pulled up and the screen protector will attach to the screen. The motion is showed at 2:14 but she doesn’t say it aloud
6 come in the box. It took me 4 tries to put on which left me with 2 spare. The number one tab kept breaking off. I put a bumper case on and it peeled the protector off, so I went to reapply another and did it first try leaving me with another spare one. Good concept but I think the design of the application process it quite bad. Also there’s no bubbles but slight watermarking or rippling effects all over the screen. Since I have apple care I may just take it off and chance it.
I watched the video twice and had no problems applying the protection layer the first time. I can’t say anything about the durability yet, but so far very pleased.
I've noticed if you have bubbles show up a while after installing the screen protector that running it under hot water and then pressing on the bubbles takes them away
Super easy, these have to be the best Apple Watch screen protectors I've used. Don't rush and it will apply with nearly no way to even see it on the watch screen.
Just removed the first one I had on for months there was nothing wrong with it no scratches nothing I replaced it with a new one same one this is the best plastic screen protector I ever used 👍👍👍
I got it on my 6th try and I had to take it off within a minute !! Now I have to buy more of them but I won’t bother with this product! Some may be lucky and get it right straight away but that’s just luck as the bubbles can be anywhere once on. I wish they made it a bit more simplistic instead of 101 steps ! They looked good on but without the bubbles which Made my watch looks worse.
I was really worried about this after reading all the comments, but even after one tab accidentally falling off too early I was still able to get it on without issue!
![LK [Flexible TPU] Screen Protector + [Alignment Tray] for Phone](http://i.ytimg.com/vi/8M1DhzfrTis/mqdefault.jpg)
Check out some secret sick deals ► lk-direct.com/limited-time-sale
Message us on Facebook► facebook.com/lkdirect88
Iiijiiiiiiii😊
@@cupiemunro5169k
Super easy if you follow instructions and watch the video closely. Got it on the first try and it looks so good you can’t even tell it’s on there. Thanks!
Bizarre so many are having trouble with this. I watched the video once and had a perfect application on my first try. I'm actually really impressed with the results - you cannot tell it's on, except for the slightest soft/tacky feel if you tap your fingernail to the screen. This beats the hell out of the wet-application watch protectors I've used in the past.
Yeah. I did on the first try too. I do have like 3 little tiny visible bubbles. But like I said ..I’ll live. The screen looks good though.
Yeah. I did on the first try too. I do have like 3 little tiny visible bubbles. But like I said ..I’ll live. The screen looks good though.
It seriously looks so good I put another one on thinking it wasn’t on there
Congrats, I’d give you a cookie if I had one
Not sure bizarre is the right word. You're probably just a super genious
This turned into a part time job
Jonathan Cannon 😂😂😂😂😂😂😂
Lol
LMAOOO YES! OMG
Fr it was way too hard
😂
I almost burst into tears with anger doing this. I used 4 before I figured it out. It’s in two pieces and the thing you stick first is the cover, not the other way around. Great when it works but not for the feint hearted.
Yea, I was confused the first time. Got it done the second time. Great product when you figure it out
I didn’t follow the instructions and did it first time 😂
I’ll have you know I went through four of the six screen protectors and I only cried once. But hey, my watch looks great!
Em
I think I know where everyone is getting confused.. on tab 2, the plastic is supposed to lift. It feels like you’re pulling the protector off however halfway you will hit a green pattern on the watch. This is where you push the air bubble remover forward while holding tab 2 and repeat for number 3. It’s not very well explained in the video so I get that’s how people are confused. However, when the protector is on you can hardly notice it.
Definitely more explanation is needed for steps 2 and 3!!!!!!
E Will yeah I agree. It feels like the whole protector is about to come off when peeling tab 2 but it doesn’t mention that in the video
I wasted 6 of them being an idiot
Watch out, you do a good job putting it on one time and next thing you know you're the guy in the family who has to put everyone's screen protectors on from then on.
😂😂😂
It was really easy to apply. Just watch the video and pause it over and over if you are not sure of the next step.
Worked great the first time. Thank you. A little tip: Have everything taken out and ready. Leave the alcohol wipe on while you pick up the cloth. Leave the cloth on while you pick up the dust absorber, and leave that on while you pick up the covered film. Keep the screen covered because dust is like Jurassic Park dinosaurs…”it will find a way”!
Or just do it in the bathroom
The dust was the very least of my worries in trying to do this. 🤣
Im glad they sent so many screen protectors. It took 4 try’s b4 I got it right. Lol
Replaced one I had on here for over a year. Took my 2 more tries. Now I know why they give you so many in a box LOL!
looks nice after i spent like 700 years and went through 5 protectors to get it on + the tabs weren’t cut in the right place on my kit
This one is tricky it wasn’t until the second one that I realized you need to peel the bottom and not the top off when you pull number one the top is connected to number four and meant to align the center and is the “wax paper” for the bubble remover to go over before you take it off
This is the best screen protector for apple watch. I have a series 6 but I have used LK screen protectors since series 4. I have to say, this design is so much better than the original LK design. I wasted 2-3 with the the old protectors in the yellow/black package. This new design in blue/black package is great! The round sticky holder works perfectly - just don’t use it on an expensive dining room table (LOL!). It does get a little confusing after step 1, but if you watch the video a couple of times, you’ll get it. The video is exactly how it works. I hope they keep making these for series 7 watch and beyond!
Everybody’s making fun of how long the process is, but y’all have to admit it’s pretty clever.
No bot really I shouldn’t have to watch a video to install a screen protector 😭😭😭😭
It is excellent once you figure it out.
It's the best fitting protector I ever installed, worth the extra time to setup, saved time later as no bubbles or lint getting stuck! I couldn't believe I did it first try, it's so hard to see the protector on that I had to verify under light to see the second layer
I’m no
I followed all the directions but I really can’t tell if there’s a protector on the screen or not
@@msims1081 shine a flashlight around the edges of the screen. You will see the outline of the screen protector.
The video is clear and easy to follow, as are the installation steps. My watch protector fits perfectly, no bubbles, either!
would you recommend the product?
Just installed this screen protector and wow it looks and feels amazing! Thanks for the video!
I am so happy I looked at the comments before doing this because now I only used one instead of the whole pack So thanks to all of you sacrificed so that you could help the others
This was super quick and easy! I just installed it on my Series 7 and I can't even tell it's on -- no bubbles! Many thanks! :)
This is great. it came with a bunch of screen protectors- and I finally got one on that I was satisfied with, after a couple tries. After several months of wearing one, it started to peel off from regular everyday use and hitting the gym. Anyway, I just now replaced it with one of the spares left. And honestly, this is great, im so happy with this purchase because the best part is i have 2 extra spares left. Thank you LK!
Is it easy to take off? Cause I’m applying it right now and let’s say in a couple of months like 4-5 I want to take it off to resell will it be hard?
@@onlyqualityfootball1924 yes easy to take off. screen protectors in general may have many issues, but they are always easy to take off lol :)
It came with 8 protectors. I used four😆
Really like this product. Watch video a couple times and work slowly. Would definitely order again. Price is excellent for this product.
Couldn’t be more straight forward. Got it on the first try! Fits perfectly too.
I’ve done it on the first try, was not as easy as it look on the video but still doable. Just take your time and rewatch if you’re not sure. I have two tiny bubbles but you can’t see them when the screen is turned on
Works amazing on my Iwatch. Have put two protectors on iwatches and they last forever. Thanks.
Nice product and video, but get rid of that terrible whistling noise!
I did it in 3. The bumper I put on messed up a corner of the protector first two times, but the film went on okay. The third attempt also lifted the film, but I can live with it.
So impressed, completely invisible and easy to apply.. going to find out what else they do..
"Use the dust absorber..." Oh you mean the sticker?!
😂
*Shrugs* It works
Got the product: “Why do I need 6 screen protectors for 1 watch?”
Saw the instructions: “Oh, I see...”
No matter how many times I tried, the tabs just came off and the protector was impossible to install. NOT a good design.
Kenny Vee its not a good design, but you are the only noob and stu-pig as fuck dont know how to install it..i can install it eqaily, noob 🙄
@@m.n.r4222 hey man , me also failed 4 times already to install it on the watch. I got 2 more tries, will try in few days but i'm nervous as hell. This is pretty tough (I had someone else try to help me as well, they failed same as me)
Uzumaki Naruto 9 yos shouldn’t be on yt
Fuck this thing
I can't believe I bought into getting a screen protector done at one of those booths at the mall, for $25, when for roughly the same price I got a whole pack of these from LK. And they are so easy to install; thanks to the well made and clear video instructions and innovative product design (no idea though if LK came up with the design, either way it works quite well).
I'll have to see how long each screen protector lasts, please respond to this message if it's been a few months or years and l'll surely reply and let you know how well they faired to relatively rough use (I commute with a knapsack and very often have the strap of my bag rub against my wrists, and I bike in all weather conditions, even well bellow freezing temperatures or the hottest days of the year in Toronto, so my devices have to put up with a lot of conditions.)
How has it held up for you?
@@pennym1056 They don’t last too long, I’m trying to remember how long because I’ve now forgotten to put one back on after a hand full of months, getting damaged makes corners start peeling. With how rough my workplace use can be I got tired or replacing them.
Super easy installation! Can't even tell it's there.
Me after getting it: “How complicated could this be?” Me FINALLY watching the video:”oooooohhhhh 😅”
Succeeded on first try! Really helpful video, paused between the steps to copy the step. Watched the screen closely to check if all the bubbles were pressed out. When I was finished, I did have a line in the middle of the screen. Someone said you can press this one out with your fingers though. I don't see the line when the screen is always on, so I don't mind. The alcohol pad is really juicy which is nice, cleaned my phone and tablet with it too. If you get some gunk of the foam glue on the table like I had on my glass table, you can use the alcohol pad to clean it. Cleaned some other spots on the table with it as well.
Worked like a charm for me 🤷🏽♀️
Wow, this was SO much easier than those wet screen protectors I wasted my money on! Thank you so much!
There’s a bit of a learning curve. It took me 2 tries but I got it in the end! Definitely watch and listen carefully. I recommend watching in its entirety first. Then watch it again and applying while watching the video, stopping it if you have to.
I'm about to be on my second try.
Very good video. It would have been nice to hear the engine noise
Worked great. Watched the video...first one installed great. Took a min to realize you need the green middle section to come off to get it. Glad there’s 6 but for now...only needed one.
Success after the third try. I’m sweating.
Literally took me fucking up the first one then taking a second one apart layer by layer to figure it out for the third on the video is a waste of time. This was 6 months ago you posted this was the protector any good?
Not sure how people struggle with this, was quite easy with the video
I love it does not even look like it has one!!
Bought one of these on amazon a week ago and theyre great, took me 2 tries to get it right. Havent tried it with a case on yet but looks good right now
My application was perfect thanks to this video. Thank you ☺️
Honestly... once you get it down it’s a great investment. Took me about two wasted to figure it out but then I had the same protector on for a year. Came back because I forgot how to do it and I needed to change it out.😂
why did you have to change it after a year? was it scratched or wha?
@@martinorozco6759 Just started coming up on the corner a bit. I don’t have a bumper in my watch and I’m pretty reckless with it so making a year is solid for me.
This left gunk on my desk and there are lines on mine!!
Vielen Dank für das tolle Erklärungsvideo 👍🏼 funktioniert echt prima 👏🏻
Awesome screen protectors. Had some for my series 3 and got these for my dad. Literally flawless installation everytime. Just redid it and no bubbles whatsoever. (Not paid btw, just sharing my experience)
Thanks very much, nice and simple instructions and a great product..
Such a great cover, really saved my Apple Watch from being damaged. I definitely recommend buying the LK screen protector
This is really nice! Easy to apply and no bubbles
The kit comes with 6 screen protectors because you need 5 tries to get the 6th one to finally work. What crap.
Used 2 already, and nowhere near getting it. Total waste of money
Lol Zing! Well done 👏👏👏
First one fits perfectly for me. Was also my first try on something like this.
Maybe cause ur fucking stupid! If u take your time u will b able to get it on the first try. But ur a woman so
Me ridiculous comment 🤦🏻♂️
Complicated, yes. Worth it, double yes.
Much better that the old video and protectors I used a few years ago of the same product. It's not unusual for me to have to do it twice and this was no exception had a bit of dirt I didn't see until the end.
How do i know if the protector is on?
Well done! Thank you. End product looks great.
The video was great and the install of the screen saver was easy. Price was great also.
Got it on my first try! :)
This was very easy, though worth emphasising that when they say "lift tab 2", they *really* mean lift it, as in lift until the hard plastic can be pushed away from the watch using the squeegee (hint: you want it almost vertical, then when you push with the squeegee you'll see the bottom of the hard plastic attached to the tab move away from the film itself).
Wow......never seen it more perfect...my last one peeled off half way because of sweat and laziness
I love looking at the comments and seeing people complaining and saying this is a waste of money. Maybe you don't know how to follow directions? First try and it was perfect for me.
The product application process is poorly designed. You took a risk of dust getting on the sticky underside and warping the protector when you applied it. As that is the only way to apply it because of the plastic flaps. It's an ineffecient and not a consumer friendly install design. That's why there's a bunch of angry comments and bad reviews and why only a small handful of people agree with you. You love the comments because you think you are better than the ones complaining. That's your mistake. You are not better than them. You assumed they didn't follow directions. Another mistake. We need less comments like this on the internet. Thanks.
Christian House shut up you idiot
Right I came here just to read them.. It's most likely people spamming and fake comments to make a good product look bad.
Guys after a few times it’s actually really easy and super intuitive
Installation video is great. I installed the screen protector on my iWatch 7 45mm just like the video showed
Just installed my second one after quite a few months of protection (can't remember when I put it on). I did use two the first time but this time just one. Instructions aren't the best but protector lasted.
I remember the dark old days of applying screen protectors, phone ones come with template an these watch ones, it’s harder to get wrong than mess up
So easy and functional, good work!
Perfect instructions! Thank you!
found this very easy to install, first try, looks great, thanks
Good gravy this is perfection! Thank you!!
-Perfekt!! Sehr gutes Erklärungsvideo zur Installation der 44mm Apple Watch Displayschutzfolie. Wenn Sie den Schritten nacheinander folgen, ist der Protektor perfekt. Danke vielmals.
Simple yet effective instructions. Well done!
Putting on a new screen protector is so satisfying. It's like getting a new device. F inflation I don't need to upgrade.
Great video no issues here, very happy with this product.
I don’t understand these comment lol, honestly had no problem at all putting on
Then can you maybe put the comments in laymen's terms? The video tells me to {pull of tabs" but then the tabs just...disconnect and nothing peels off. I think maybe you can explain it better than the company can if you were able to do it, because their instructions just plain DO NOT work.
Kenny it’s kind of like a bandaid. When you pull the tab up it’s supposed to come up but you have to use the squeegee and move it towards the end you just pulled up and the screen protector will attach to the screen. The motion is showed at 2:14 but she doesn’t say it aloud
@@KennyVee wait first step, did you watch the video? Lol
6 come in the box. It took me 4 tries to put on which left me with 2 spare. The number one tab kept breaking off. I put a bumper case on and it peeled the protector off, so I went to reapply another and did it first try leaving me with another spare one. Good concept but I think the design of the application process it quite bad. Also there’s no bubbles but slight watermarking or rippling effects all over the screen. Since I have apple care I may just take it off and chance it.
Just got the screen protectors. And per your instructions the ones I got are cut wrong. Might wanna look in to that
I watched the video twice and had no problems applying the protection layer the first time. I can’t say anything about the durability yet, but so far very pleased.
It’s crazy, long, and yet so worth it once it’s on
Just bought your case from Amazon!!!
Easy as pie. Thank You for the video.
First try failed but the second was much easier and the 3rd (different watch) was a breeze. Awesome product.
I've noticed if you have bubbles show up a while after installing the screen protector that running it under hot water and then pressing on the bubbles takes them away
Super easy, these have to be the best Apple Watch screen protectors I've used. Don't rush and it will apply with nearly no way to even see it on the watch screen.
Excelent !! Great video, it helped me a lot !
Mine worked great and has been on for a year and now I want to replace it but what is the trick to getting it off?
Go swimming, unfortunately it doesn’t hold well under water.
I bought this screen protector and its perfect! Easy to install 👍🏻
I’m late on this but I had Best Buy put a clear one on my watch has been amazing screen cover
Just removed the first one I had on for months there was nothing wrong with it no scratches nothing I replaced it with a new one same one this is the best plastic screen protector I ever used 👍👍👍
I got it on my 6th try and I had to take it off within a minute !! Now I have to buy more of them but I won’t bother with this product! Some may be lucky and get it right straight away but that’s just luck as the bubbles can be anywhere once on. I wish they made it a bit more simplistic instead of 101 steps ! They looked good on but without the bubbles which Made my watch looks worse.
Great product, thank you guys!!!!!
At first I felt bad for how long it took me, but after reading the comments, I feel OK
don't expect the protective film to stay on the phone as you lift tab 4. you may have to grab the film as you lift that last tab.
i've done this multiple times and still have to reference this video to double check
This version applies with much less hassle and looks infinity better!
Whaaaat? this is the watch tutorial, I want the phone tutorial but using the url provided on the protector box.I get this!!
try to look on their channel
great product, applied it easily. cheers
Ok. I did it. Instructions wasn’t bad. But.....I do have a little visible bubbles. But I’ll live 🙄
Took me 3 attempts
Buy more than one if you are using these
Once on its banging, but getting it on is a ball ache
I was really worried about this after reading all the comments, but even after one tab accidentally falling off too early I was still able to get it on without issue!
Yo..... This has been the most perfect screen protector i ever put on...... No bubbles no nothing.... Goddamnn.... I m so proud of myself