Great video Mark. I am mulling over a printer, bizarrely, right now, and I found this really informative. I normally watch your channel for the smart home stuff, but enjoyed this one!
Thanks for the video. Don’t get encouraged if the video doesn’t get much views at this point. It will take effort and time before plastic people will find your channel. I enjoyed it! Thanks!
I just picked up this printer and so far i love it. It was super easy to setup and i was printing a benchy within an hour of getting it in the box. (including assembly time) So far the default settings have been perfect. Im printing at the fastest speed of 500mm/sec and my prints are perfect! Took 10-12 mins to print a benchy test. So far i have already printing a controller stand that holds 2 xbox controllers (1.5 hours) and a headphone bracket that clamps to my desk to hang my headphones. (1 hour, 2 parts) The app is a nice feature. Before i bought it i thought not having a screen on the printer would be an issue but it hasn't been a problem. The app can easily get tons of models from online and you can start printing them right away. Its also nice that i can send the prints through the app via bluetooth or wifi so i don't have to physically walk over to the printer to start up a print. I can just fire something off from the other room and go grab it when its finished.
So strange. I got my M5C for xmas. My benchy took 35 min to print ( i was in fast mode) It came out perfectly, but I wonder why it was twice as long as both of yours.
This printer is AMAZING!!! But I'd love to have an Ankermake 12 inch (310 mm) square bed. If it is available, I'll be first in line for it! I am a reel-to-reel recorder enthusiast, so my aim is to create 10 1/2" reels!
That fan noise is the classic sound of a cheap fan bearing failure. Mine does the same until the bearing warms up - or at least that’s what I assume is happening due to the poor bearing friction. A good quality fluid or magnetic bearing fan will get rid of the sound.
@roberttco1 yeah I know noctua have great silent fans but is it possible to open up the nozzle enclosure and connect it straight away? If you will try a solution can you update me please I would really appreciate it
I own an M5C and that noise is definitely not normal, at least compared to the one I have. I'd tend to agree with the faulty bearing theory. Update: Mine has started making this noise too, until it warms up. Ankermake support aren't being overly helpful about it either. I'll put up with it until the fan fails, then I'll replace it with something better.
Hi! Great video! I'm just digging for M5C content because I am looking to get one for the holidays. Thanks for the content. As far as the dust from the wheels, that is normal. The wheels are just wearing in. You just have to adjust the pressure on them by turning the nut. There are videos showing how to adjust them on other printers, but the same method applies to the M5C. Again, I don't have a printer. I just know this from all the damn reading I've been doing...haha. Thanks again for the video!
I had an Aquila C2 and wow I’m sure that was a horrible first impression for you. Was my first printer and while it worked well, that was when it worked and that was _very_ rare. Upgraded to a P1S only a few weeks ago and it’s night and day
Thanks for this Mark. If I literally just want an entry into 3d printing for some ESP cases and maybe a little fun with the kids (9 and 7) is there a printer or brand that you'd recommend? Was thinking I might try and pick something up second hand, but perhaps I'm better off getting a budget newer gen based on your comments?
Hey Simon. Personally I think this printer would tick all the boxes for what you are looking for. Its a simple plug and play and you will be printing in minutes. I would definitely wait for a sale though if you are thinking of this printer. I picked up an additional unit recently on sale and also got a choice of filaments with it. As this is a newer higher end budget printer it has lots of great features that will save you a lot of headaches you will get if you just opt for a £150 printer. Next year AnkerMake are releasing the V6 Colour engine which is an addon for this printer that will give full multicolour printing capability so could also be a great upgrade.
Thread is stuck Thanks Mark for this great video. Are you familiar with the problem of not being able to feed the PLA to the printer? I can push in (and pull out) the PLA in the PTFE. But all of a sudden I can't push it in far enough for the printer to feed it. I suspect that there are remnants of broken material in the extruder. How can I remove them?
Hey man, recently was sent one myself and that horrible sound on start up has started happening to me. Apparently I've read it's the fan in the base! They do sell replacement fans on their site though. The notification noise was so annoying that I had to turn it off as just like you, the sound upset EVERYONE!
Heya! Welcome to the world of 3D printing. You can use any stl file with the printer. I would recommend using your PC to browse sites like Printables, thingiverse and others. You can then send files straight to the printer.
Hi, I wanted to ask if there is a usb port to use a thumb drive? Or are you able to upload your own designs to print? Also I really appreciate this being a genuine review. All the other ones are obviously sponsored with people saying only good things about the printer and testing it out for a couple days. This is a 5 month review talking about the pros *and* the cons and that’s very valuable
Heya. Thanks for the feedback. There is a USB C port on the side that will allow you to store and print files from a USB C thumb drive. You can also send files from your phone and PC.
what gears do you need? Just asking. I picked this this printer up and will test for 60 days and see whats up. If it does not work, I will return for an a1 mini
Somewhat informational BUT your pronounciation IS unbarable. PLEASE don't raise the tone of your voice at the end of every sentence as if you want to add something. Instead lower it to END your sentence accoustically as well. Drove me insane half way through and made me abort the video.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Great video Mark. I am mulling over a printer, bizarrely, right now, and I found this really informative. I normally watch your channel for the smart home stuff, but enjoyed this one!
Thank you for the feedback :)
My M5C will show up at my door shortly so this video was a GREAT find!!!! Lots of useful info for a total newbie. Thanks Mark!!!
Thanks for the video. Don’t get encouraged if the video doesn’t get much views at this point. It will take effort and time before plastic people will find your channel. I enjoyed it! Thanks!
Thank you :)
I just picked up this printer and so far i love it. It was super easy to setup and i was printing a benchy within an hour of getting it in the box. (including assembly time) So far the default settings have been perfect. Im printing at the fastest speed of 500mm/sec and my prints are perfect! Took 10-12 mins to print a benchy test. So far i have already printing a controller stand that holds 2 xbox controllers (1.5 hours) and a headphone bracket that clamps to my desk to hang my headphones. (1 hour, 2 parts)
The app is a nice feature. Before i bought it i thought not having a screen on the printer would be an issue but it hasn't been a problem. The app can easily get tons of models from online and you can start printing them right away. Its also nice that i can send the prints through the app via bluetooth or wifi so i don't have to physically walk over to the printer to start up a print. I can just fire something off from the other room and go grab it when its finished.
So strange. I got my M5C for xmas. My benchy took 35 min to print ( i was in fast mode)
It came out perfectly, but I wonder why it was twice as long as both of yours.
@@robertdascoli949 I think I was incorrect about my print time, yours sounds more accurate, still a great printer.
My boys just just got this for my birthday. Hope to start printing tomorrow. Thanks for the info!!! New sub!!!
Just bought this for 189 bucks on black friday. Impressed so far.
This printer is AMAZING!!! But I'd love to have an Ankermake 12 inch (310 mm) square bed. If it is available, I'll be first in line for it! I am a reel-to-reel recorder enthusiast, so my aim is to create 10 1/2" reels!
This is a really cool idea!!!
That fan noise is the classic sound of a cheap fan bearing failure. Mine does the same until the bearing warms up - or at least that’s what I assume is happening due to the poor bearing friction. A good quality fluid or magnetic bearing fan will get rid of the sound.
Thank you for the info. I will take a look at the fan :)
Can I change the fan for a quiter one because I might put this in my bedroom when I get it since I don't have anywhere else😅
@@Krispy367 people like Noctua fans for their silence. I don’t have any so can’t comment on how accurate that is.
@roberttco1 yeah I know noctua have great silent fans but is it possible to open up the nozzle enclosure and connect it straight away? If you will try a solution can you update me please I would really appreciate it
I own an M5C and that noise is definitely not normal, at least compared to the one I have. I'd tend to agree with the faulty bearing theory.
Update: Mine has started making this noise too, until it warms up. Ankermake support aren't being overly helpful about it either. I'll put up with it until the fan fails, then I'll replace it with something better.
yes it's the Pom Wheels working into the v-channels, it will do that for a little while, but will get less and less dust, the more you use it..
Hi! Great video! I'm just digging for M5C content because I am looking to get one for the holidays. Thanks for the content.
As far as the dust from the wheels, that is normal. The wheels are just wearing in. You just have to adjust the pressure on them by turning the nut. There are videos showing how to adjust them on other printers, but the same method applies to the M5C. Again, I don't have a printer. I just know this from all the damn reading I've been doing...haha.
Thanks again for the video!
Good stuff! Good quality review! Subscribed! Smashed the like!
Hey. Can you do an updated video on how to integrate eufy and wyze cameras into home assistant?
I had an Aquila C2 and wow I’m sure that was a horrible first impression for you. Was my first printer and while it worked well, that was when it worked and that was _very_ rare. Upgraded to a P1S only a few weeks ago and it’s night and day
Thanks for this Mark. If I literally just want an entry into 3d printing for some ESP cases and maybe a little fun with the kids (9 and 7) is there a printer or brand that you'd recommend? Was thinking I might try and pick something up second hand, but perhaps I'm better off getting a budget newer gen based on your comments?
Hey Simon. Personally I think this printer would tick all the boxes for what you are looking for. Its a simple plug and play and you will be printing in minutes. I would definitely wait for a sale though if you are thinking of this printer. I picked up an additional unit recently on sale and also got a choice of filaments with it.
As this is a newer higher end budget printer it has lots of great features that will save you a lot of headaches you will get if you just opt for a £150 printer.
Next year AnkerMake are releasing the V6 Colour engine which is an addon for this printer that will give full multicolour printing capability so could also be a great upgrade.
Idk if you already bought it but it’s 240 dollars on the ankermake website!
I enjoyed it, thanks, still have not dived in. You video hit my exact concerns.
Now hmmm maybe a End to End with a esp32 project, HA & 3D print.
Thread is stuck
Thanks Mark for this great video. Are you familiar with the problem of not being able to feed the PLA to the printer? I can push in (and pull out) the PLA in the PTFE. But all of a sudden I can't push it in far enough for the printer to feed it. I suspect that there are remnants of broken material in the extruder.
How can I remove them?
Hey man, recently was sent one myself and that horrible sound on start up has started happening to me. Apparently I've read it's the fan in the base! They do sell replacement fans on their site though.
The notification noise was so annoying that I had to turn it off as just like you, the sound upset EVERYONE!
Thank you for sharing :)
Amazing video! Would you make a video explaining how to print an object with 2 or more colors with ankermake? Tks
Helpful video so thank you for that! I have to ask: is there no letter “g” in your language?
Hi Mark. Have you had any problems with the print head or stepper motor getting jammed? I've seen some reviews mentioning it
Hi . Great 3D printer . I have a question . I want to print a mask, but its to big about 30mm . Can I divide the mask in half to print separately?
Yup. Just use 3d gloop or super glue if you don't have it.
I used epoxy for a stronger bond and yes you can
Time for an aqara sensor to tell you to open the window when the and turn on the vent when the printer turns on
I'm new, can I print things from thingiverse on this or is it only prints offered on the app?
Heya! Welcome to the world of 3D printing. You can use any stl file with the printer. I would recommend using your PC to browse sites like Printables, thingiverse and others. You can then send files straight to the printer.
Thanks Mark.
Very welcome
I'm due to get a Creality Ender 3 V3 SE next month. Never done any of this before so it's gonna be a learning curve.
You will learn a lot and enjoy printing all of the things! 😁
Hi, I wanted to ask if there is a usb port to use a thumb drive? Or are you able to upload your own designs to print?
Also I really appreciate this being a genuine review. All the other ones are obviously sponsored with people saying only good things about the printer and testing it out for a couple days. This is a 5 month review talking about the pros *and* the cons and that’s very valuable
Heya. Thanks for the feedback.
There is a USB C port on the side that will allow you to store and print files from a USB C thumb drive. You can also send files from your phone and PC.
would be nice if they sold gears
what gears do you need? Just asking. I picked this this printer up and will test for 60 days and see whats up. If it does not work, I will return for an a1 mini
@@jaimeastin I just replaced the entire print head too solve the problem.
I have had mine for a month and have never dc’ed from the Wi-Fi 😮
I think this was more of an older firmware thing to be honest. Its been solid for me as of recent.
@@MarkWattTech awesome man! Been loving the printer! Some annoyances but so far its been great!
It's now only £250!
Somewhat informational BUT your pronounciation IS unbarable. PLEASE don't raise the tone of your voice at the end of every sentence as if you want to add something. Instead lower it to END your sentence accoustically as well. Drove me insane half way through and made me abort the video.
Dude be ending every sentence with a question mark lol