Excuse my comment. I'm repairing the s type lighter by watching this video, but I can't get the two parts out of the cylinder I'm cleaning in the work from 8 minutes 17 seconds. I can confirm that there is a dent in the tube, but does it come out by turning this? Also, if you assemble the lighter after inserting the filter and light it without doing that work, the fire will come out from the roller part. Please tell me why it doesn't work.
Also, regarding the part I took out at 16:22, it seemed that there was a clog at the end, so when I burned it with a lighter, it started to penetrate, but did it contain rubber? Or does it mean that the solidified gas could be removed?
the part is not screwed but interlocked, just bend and pull. I didn't understand the second part of the question, however if you change the orings and the filter without reassembling everything you can see if not Leaks gas
@@santoanastasio4201 thank you. The metal part inside was taken off, and the green garbage was piling up. Can I put a filter between metals like in the video?
@@takadebu yes, the piston certainly contains a gas closure rubber that needs to be replaced. however repairing s type is among the most difficult lighters
Thank you for your careful guidance. As for the rubber, is it okay to use a completely sealed one? Or do you want one that is partially penetrated? There is no place in Japan that will repair the S typewriter, so I would like you to tell me about it.
ciao Santo, ho smontato il mio accendino S e sono riuscito a farlo funzionare, ma non tiene il gas a lungo. perde ancora molto gas. potrei postarti per vedere se è possibile ripararlo, per favore? saluti Jack.
Grazia
Hi ya
I'm looking for a replacement gas inlet valve for an s type, don't suppose you'd know where I can get one from
Many thanks
ebay.it/usr/theladyofthelighters
ebay.it/usr/polifeb try asking on these sites
@@santoanastasio4201 great will do, I've looked almost everywhere.
Many thanks for the quick reply
Hello again
What is the filter you use in the gas outlet between the metal disks?
Many thanks
Hi, it's a foam-like filter
Ok great thank you
Hi, do you sell the orings for the Dunhill S type?
www.ebay.it/itm/155007079486?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rReUYUV5QBK&sssrc=2051273&ssuid=rReUYUV5QBK&var=&widget_ver=artemis&media=COPY
Excuse my comment.
I'm repairing the s type lighter by watching this video, but I can't get the two parts out of the cylinder I'm cleaning in the work from 8 minutes 17 seconds.
I can confirm that there is a dent in the tube, but does it come out by turning this?
Also, if you assemble the lighter after inserting the filter and light it without doing that work, the fire will come out from the roller part.
Please tell me why it doesn't work.
Also, regarding the part I took out at 16:22, it seemed that there was a clog at the end, so when I burned it with a lighter, it started to penetrate, but did it contain rubber?
Or does it mean that the solidified gas could be removed?
the part is not screwed but interlocked, just bend and pull. I didn't understand the second part of the question, however if you change the orings and the filter without reassembling everything you can see if not Leaks gas
@@santoanastasio4201
thank you.
The metal part inside was taken off, and the green garbage was piling up.
Can I put a filter between metals like in the video?
@@takadebu yes, the piston certainly contains a gas closure rubber that needs to be replaced. however repairing s type is among the most difficult lighters
Thank you for your careful guidance.
As for the rubber, is it okay to use a completely sealed one?
Or do you want one that is partially penetrated?
There is no place in Japan that will repair the S typewriter, so I would like you to tell me about it.
ciao Santo, ho smontato il mio accendino S e sono riuscito a farlo funzionare, ma non tiene il gas a lungo. perde ancora molto gas. potrei postarti per vedere se è possibile ripararlo, per favore? saluti Jack.
Ciao l'accendino s type è uno degli accendini più difficili. Scrivimi una mail santoanastasio1@gmail.com
Tôi có 1 con ysl. Bị tắc ga mà không biết sửa nó
khorosho
Спасибо