It was a long time since I last modified a 302 with a MP, PUM, Crosswind, HT 100 drag and I got stuck getting the anti reverse setup figured out if it wasn’t for your video. I do like and prefer these to 706z worm gears and they are just solid and straightforward decades later.
Happy to hear the video helped, Matt! Both track systems have their advantages and drawbacks, but totally get what you mean regarding durability. Spread the word about the channel. Barry
Thanks Y L! Got in a TLD25 with the drag locking up. Think it'll have useful info in there, so I'll probably record it and get the video up in a week or two
Just serviced my 302 but it’s still cranking slow which was the problem to start with. I have another one that cranks free and easy. More troubleshooting I guess. Good video!
@@TSGReelService No noises. Disassembled and cleaned again this time using WD40 on all friction areas. New oil and grease and now cranks much better. Thanks for your input!
Thanks for that video. My 302 is working great, but the bailing wire doesn't seem to be going far enough up and the line hits it as it spools off. limiting cast distance any suggestions
You're welcome and thanks for checking out the video. I know what you're referring to... assuming that your bail mount is fine, try GENTLY bending the bail wire more and more OPEN when it's already in the open position by pulling back on it until it's in an acceptable "open" position. The goal is to try and get the bail wire to be more "open" in the open position without snapping the bail wire connection point near the cone (by the line roller)..... or, you can try purchasing a new bail wire here: ebay.us/qaToFr (affiliate link). Hope this helps.
Have 6 of these to service. Suffering from extreme neglect. Watched this for a refresher. Two thumbs up! BTW, do you use any oil on the metal drag washers?
Thanks! Nice reels. All the best with the service. No, I don't grease them, but you could if you want to.... I don't think it'd decrease the top end that much.
@@TSGReelService I just bought the 302 at an estates sales new in box so I’m looking to match it to a nice rod from the seventies I’m thinking that’s the same time the reel was made
Unless you're just looking to display it, I would stay away from rods that age and use a newer medium/heavy 6' to 6' 6" rod that feels good in your hands. Hit up bass pro with your reel in hand and play with a few to see how they feel.... or have one custom made.
Had that reel ever been in service? When you took it apart it looked like there was virtually no grease or oil on any of the inner parts - no grease on the oscillator or anything 🤔. Most of the ones I have worked on that were used were filthy inside and full of old brown grease.
No clue, brother. Yes, most of the time you find a lot of crud and dried stuff in these older ones. Maybe it was stored outside and the grease broke down?
I will work on my own reels thanks have 38 off them your to expensive putting in parts that they do not need and a lot off work that you charge the people for that is not necessary
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Appreciated the video content? Want to show some love?
Hit the Thanks button under the video
or hit up my PayPal tip jar:
PayPal.Me/TSGReel
EXCELLENT VIDEO! Clear and concise tutorial that is easy to follow. Thank you. 😊
Thanks! I appreciate the love!. Spread the word about the channel.
It was a long time since I last modified a 302 with a MP, PUM, Crosswind, HT 100 drag and I got stuck getting the anti reverse setup figured out if it wasn’t for your video. I do like and prefer these to 706z worm gears and they are just solid and straightforward decades later.
Happy to hear the video helped, Matt! Both track systems have their advantages and drawbacks, but totally get what you mean regarding durability. Spread the word about the channel. Barry
Very professional work - Big Like !!!
Thanks Y L! Got in a TLD25 with the drag locking up. Think it'll have useful info in there, so I'll probably record it and get the video up in a week or two
Just serviced my 302 but it’s still cranking slow which was the problem to start with. I have another one that cranks free and easy. More troubleshooting I guess. Good video!
Thanks for watching, Jimi! Sorry to hear the problem still exists. What have checked so far? Any noises/scraping sounds when you crank?
@@TSGReelService No noises. Disassembled and cleaned again this time using WD40 on all friction areas. New oil and grease and now cranks much better. Thanks for your input!
No worries. Glad to hear it's working well.
Thanks for that video. My 302 is working great, but the bailing wire doesn't seem to be going far enough up and the line hits it as it spools off. limiting cast distance any suggestions
You're welcome and thanks for checking out the video. I know what you're referring to... assuming that your bail mount is fine, try GENTLY bending the bail wire more and more OPEN when it's already in the open position by pulling back on it until it's in an acceptable "open" position. The goal is to try and get the bail wire to be more "open" in the open position without snapping the bail wire connection point near the cone (by the line roller)..... or, you can try purchasing a new bail wire here: ebay.us/qaToFr (affiliate link). Hope this helps.
Have 6 of these to service. Suffering from extreme neglect. Watched this for a refresher. Two thumbs up! BTW, do you use any oil on the metal drag washers?
Thanks! Nice reels. All the best with the service. No, I don't grease them, but you could if you want to.... I don't think it'd decrease the top end that much.
Round chain file will work I use them a lot in working on reels
👍 I know this is for others, since we discussed this already. Thanks for sharing your thoughts.
Could you recommend a vintage rod to accompany the 302 reel. Thanks
Thanks for watching! What do you consider vintage and why does it have to be vintage?
@@TSGReelService I just bought the 302 at an estates sales new in box so I’m looking to match it to a nice rod from the seventies I’m thinking that’s the same time the reel was made
Unless you're just looking to display it, I would stay away from rods that age and use a newer medium/heavy 6' to 6' 6" rod that feels good in your hands. Hit up bass pro with your reel in hand and play with a few to see how they feel.... or have one custom made.
@@TSGReelService good info thanks much. Bass pro here I come !
No worries.
Had that reel ever been in service? When you took it apart it looked like there was virtually no grease or oil on any of the inner parts - no grease on the oscillator or anything 🤔. Most of the ones I have worked on that were used were filthy inside and full of old brown grease.
No clue, brother. Yes, most of the time you find a lot of crud and dried stuff in these older ones. Maybe it was stored outside and the grease broke down?
How much do you charge to service this reel your servicing..I have 8ne that needs servicing
Feel free to email me and I'll try to help you out.
tsgreelservice@gmail.com
I will work on my own reels thanks have 38 off them your to expensive putting in parts that they do not need and a lot off work that you charge the people for that is not necessary
Thanks for checking out the video and sharing your thoughts.