Amazing craftmanship. I always wondered how this was done. The unsung heros of the Jewelery world. Thanks for posting. Its up their with watch making I'd say.
It is EXTREMELY tedious and time consuming, I have so many customers wanting to act like their job should be done in a day and my response is always "I don't make promises, I'll get it done as quick as I can". I usually start my day with two boxes full of work and that's not including watches
I just ordered some small diamond disc to try this, thanks for the idea. I watched a video of a Russian jeweler making his own from a tungsten blank, that would be a nice skill to have. @@ozguryeter9498
I am learning how to do this.... I did a bracelet and got so tired of working on it that I stopped... it's been a back burner project for a while now.... guess I'll get back to it...thanks for being honest with the amount of time it takes
Sometimes they’re bent over but usually for bigger diamonds and sort of depends on setting I think. (For example, you’d likely see that on a wedding ring with a protruding solitaire)
The labor costed more than the actual gold necklace. What was the weight of the necklace before the holes and afterwards? Does the owner get his gold dust back or some discount for the gold dust?
Incredible. Just unbelievable! Lots of little hand work 👌That's why jewelry costs a lot of money. My God, if I was doing this kind of thing, I would probably break my eyes 🙂
DIAMOND SETTERS MAKE 1$ per diamon they set if its prong set! if they have to drill and pave set,its $3..if they charging anything higher then that they are ripping you straight off..
Using a tiny ball Fraser (ball baring) helps get the positioning right and as the initial cavity you make is smaller than the final drill with the drill bit, you have more room for error should your positioning goes tits up halfway through like it tends to do lol
I want a guarantee that the diamonds won’t fall out and be lost. That’s a lot of hand fitting. Some are gonna probably come loose and fall out and be lost.
Hey what’s up boss I’m interested in a cuban link just like that one , where can I purchase one from you , I am also interested in adding diamonds to my Rolex , please reply thank u so muchh
The chains are handmade already. Very tedious process. They take gold rings and then connect them like a chain and then twist them after heating so they have that angle. Then they sand/file front and back so that it's smooth. They couldn't make them ahead of time because they have to twist the metal.
Göründüğü gibi kolay olsa bi cekic bir matkapla olmuyor bu is en az 12saatini almistir ve en az 3 yilik tecrube ister ..her usta ninda isi degil ..tebrikler
I wish I could be a diamond setter, there are courses that teach to set diamonds in rings but not chains and watches, I want to specialise In watches and chains. I would how you diamond setters made it to were you are
Cool process, but this is a waste of money. The diamonds are pretty much worthless when that small. The true value is the gold and the labor he's putting in to set those diamonds. The day the owner of the chain decides to resell it, they'll only give him the value of the gold and 3 to 5 percent of the value of the diamonds.
Amazing craftmanship. I always wondered how this was done. The unsung heros of the Jewelery world. Thanks for posting. Its up their with watch making I'd say.
It is EXTREMELY tedious and time consuming, I have so many customers wanting to act like their job should be done in a day and my response is always "I don't make promises, I'll get it done as quick as I can". I usually start my day with two boxes full of work and that's not including watches
I been trying to teach myself how to do this. One thing I learned so far, I'm the king at breaking drill bits.
Break them short and then sharpen them. The length isn’t good when it’s so thin due to the flex. Making them Short will save you so much headache.
I just ordered some small diamond disc to try this, thanks for the idea. I watched a video of a Russian jeweler making his own from a tungsten blank, that would be a nice skill to have. @@ozguryeter9498
@@ozguryeter9498how do you sharpen them?
@@ozguryeter9498how to sharpen them
@@jacquiventurini8844drill bit sharpener, my buddy has one called “dr.sharpener” or “dr.drill” something like that
Loved the video and THANK YOU for showing how long it takes to make. People look at RUclips and think it takes a few hours to make something lol.
No this dude done spent an out a day making this I could spend all day doing this and finish it
Don't care about jewelry but that making process is really interesting 😄
There is more Gold in that petroleum jelly, than i have ever held in my life.
It's ferris wax. Once it hardens, nothing sticks to it.
Got to give props where props are due. Nice work
I am learning how to do this.... I did a bracelet and got so tired of working on it that I stopped... it's been a back burner project for a while now.... guess I'll get back to it...thanks for being honest with the amount of time it takes
Are you still currently doing this?
Great video right to the point. Jewelry craftsmanship is amazing.
How interesting! I always thought they bent the pins over the diamond, but you just rounded off the tops making them fit snug.
Sometimes they’re bent over but usually for bigger diamonds and sort of depends on setting I think.
(For example, you’d likely see that on a wedding ring with a protruding solitaire)
@@BH-pl7vgwhat about on a damaged setting? Or do you just have to remove the old prongs and put them back
WOW this was awesome thanks for giving us an insight on how it's done..♥️💪🏿🙏🏿😁👍🏿
ok
Complimenti, hai effettuato un ottimo lavoro, parola di orafi italiani
crazy the amount of work involved
Nice work, setting process is definitely good, the stones set by the use of birts and drills,
Thats art!
Nice work tho. Love the video showing the progress of these.
Great video
Your video like me and my work so great man ❤
What size diamonds are typically useful for Cuban links they are so tiny😅
I swear these guys must have the hardest time picking up the scraps of gold
5:20 we all just gonna sit here and act like they just didnt call us ashy? 💀😂
beautiful 👏👏👏
What do they use as glue?
Great 🎉
I still dont understand how they stand still in place with just some hits
The hits make the top of the gold spread to the sides making it mushroom 🍄 a bit then you clean with cup burr
@@Racso-tb4bs that's awesome. Whoever figured that out should be in the hip hop hall of fame
thats beautiful
HERMOSO TRABAJÓ...
Thank I learned a great lesson
Cool man thank's for making this chain for me now i can rap better.
What is the yellow can spraying?
The labor costed more than the actual gold necklace. What was the weight of the necklace before the holes and afterwards? Does the owner get his gold dust back or some discount for the gold dust?
Incredible. Just unbelievable! Lots of little hand work 👌That's why jewelry costs a lot of money. My God, if I was doing this kind of thing, I would probably break my eyes 🙂
I still wonder how the diamonds are held in place. Is vaseline the ream glue for diamonds and gold?
No. The prongs hold them in place. You see how he gets the pick and pushes certain areas when he puts the diamond in? The prong "sets" the diamond
He is using Vaseline to "Grab" the diamonds and put it into place.I wonder if that would dull the finish on the other side of the diamond.
@@davezoom-yb8pm no it won‘t because of the drilled holes, after the chain is beeing cleaned and polished it looks all good:))
How do they know how deep to drill. It all has to be the same depth and doing that by hand is crazy.
I like how there cooling it down with a can of lighter fluid
for 20 days of work, how much did you earn interesting! The work is very painstaking and requires a lot of patience!
DIAMOND SETTERS MAKE 1$ per diamon they set if its prong set! if they have to drill and pave set,its $3..if they charging anything higher then that they are ripping you straight off..
How many stones in this chain how many stones did you put there? it's very hard work and deserves good pay! my respect for you friend!
Isn’t the Vaseline going to be “behind” the diamond after you set it. Cause it to be clouded in the back??
How do they know how far to drill the depth of the hole ?
3:36 i have something that looks very similar to that. If you know you know
3:13 this “shiny outline “ one is a double lined crater that looks horrible. I guess he has a way to fix it I hope.
Using a tiny ball Fraser (ball baring) helps get the positioning right and as the initial cavity you make is smaller than the final drill with the drill bit, you have more room for error should your positioning goes tits up halfway through like it tends to do lol
This basically art class bruh😂😂😂
I am a plumber.
Once we had a leak in an workshop of a goldsmith.
We cleaned everything up and he wanted every single rag….
Now i know why
Millimeters?
How do you know how deep to drill? Trying to learn this to
by feel
This is insane
Hame sikaoge kaha se ho app
What tool was used in day 9 to hold Diamonds tight and secure?
Crazy job!
I like my Cubans without ice.
Tough job
Great
What size were the diamonds?
Where is your shop? I’m wanting to order a 22”
How much they get paid tho?
Muchas gracias por el vídeo 🙏👍
How many Diamond💎 Setting This Chain?
Could you tell me the specs on the Cuban? Like what size mm and weight?
Im a beginner where do you get the red shellac?
SEALING WAX
I want a guarantee that the diamonds won’t fall out and be lost. That’s a lot of hand fitting. Some are gonna probably come loose and fall out and be lost.
Hey what’s up boss I’m interested in a cuban link just like that one , where can I purchase one from you , I am also interested in adding diamonds to my Rolex , please reply thank u so muchh
Don't ruin your rolex
Hello ، why you have a mirror on your bench ?!
I want to do this how much to teach me?
baby oil n rubbing alcohol🌫 cleaning solutions brightens
JERSEY PORT IS JERSEY PORT AND JERSEY FREE😊
Formation 😮😮😮
像假水鑽 訂在布上，或像標籤圓點貼在紙上，只是真碎鑽是用在K 金上,再剪下來,黏焊
Sir, What are the main important steps to stone fitting? Please tell me🙏
Soo they just sit inside the hole
How could I get in contact with you?
Could you please upload more videos like this 🙏🙏🙏
Please can anyone tell me the tools he using for drilling
I have a 30 inch 18 m cuban i want done like this but with blue diamonds.
Is less you are Elon or Jeff little bit you probably want to go with blue sapphires, as blue diamonds are in the area of $75,000 per 0.25 carat…..
the operation cost is actually more expensive than the chain and the stones
Bhaiya per month salary kitna hai
Gawdy
Name of iqument u use please anybody
I love that … but the prong not look circle .., but great work anyways❤
good catch..I used wrong size beader on few links and it happens when my eyes get tired lol
Why don't they just make the chain links with the holes already drilled in them?
The chains are handmade already. Very tedious process. They take gold rings and then connect them like a chain and then twist them after heating so they have that angle. Then they sand/file front and back so that it's smooth. They couldn't make them ahead of time because they have to twist the metal.
Good one . But I have done this type of work in less days with good finishing need to speak then reply
I don’t always wear 10k gold but when I do it’s iced out.
you never do
fine silver sterling silver 🌫🌫🌫platinum 💎💎🌫🌫🌫🌫
Göründüğü gibi kolay olsa bi cekic bir matkapla olmuyor bu is en az 12saatini almistir ve en az 3 yilik tecrube ister ..her usta ninda isi degil ..tebrikler
Me gusta la cadena cubana
Linda jóia
I wish I was rich
Work hard .
I wish I could be a diamond setter, there are courses that teach to set diamonds in rings but not chains and watches, I want to specialise In watches and chains. I would how you diamond setters made it to were you are
cuban links diamond ice-out bracelets n chains
АУУУФФФ 😎😎😎
22 day's of labor+cost of materials that's why it cost money but still everyone wants it for free I noticed.
Man now I understand why these cost so much 😩
한국분이신가요?
I needed.
👍
Just a number
灌模仔 丟~甭~拉康~用貼的
Show!!!
Good video. I would have watched it all if there was modern music.
i only see thousand tons of worksssssss..🤣🤣🤣🤣🤣😂
polish grade n solutions gloss
Whattt lol never seen it done by hammering the prongs usually push them with a beading tool
The forbidden kief
If I’m the client I want every last shaving of gold left over lol
Cool process, but this is a waste of money. The diamonds are pretty much worthless when that small. The true value is the gold and the labor he's putting in to set those diamonds. The day the owner of the chain decides to resell it, they'll only give him the value of the gold and 3 to 5 percent of the value of the diamonds.
Hiltiyle yol at