Absolute looker, you've done well to tidy up this car and breathe new life into it! Can't wait to see all the mechanical stuff you're have planned for it!
This is an awesome project. The shorts are what got me here. But longer format slower videos will make me stay. Your doing a great job buddy! Thank you❤ ps... Landscape please
Would love to see you make a dedicated video instead of taping shorts together but I love the content. You should get a wide body kit and airbag suspension so you can basically set it on the ground.
i’m working on it! i’ve gotten so good at making shorts i need to transfer what i’ve learned over to RUclips vids. but this was an experiment because people on Tiktok always complain about multi-part series, so i stuck all of these vids together and figured i’d test it on YT as well. it’s my best viewed vid by miles haha
nice video gets me motivated to work on my e46. Keep it up! Saw a lot of negative comments here but i dont know why they hate that vertical video so much.
Round rivet nuts will bite you down the line. Good concept But They are really shit after being in the elements for an hour. Use the angular or 6 edged ones. That way the bolts will come out again without just rolling the nut in place.
Finally a American Car Guy WHO UNDERSTANDS How to Build a German Car.... all these other kids just throw on Massive Wide Stance wheels on there, make the car look like shit, but you actually put Type 32's on there, which is a very commonly used wheel in Europe for E12s,E24s,E28s,E30s,E36s,E46's and such, to make a clean and nice ride.
i often look through marketplaces of various countries.... and i can tell you..... Americans should stay away from German cars (because they dont know how to properly mod them), Germans should stay away from Japanese Cars, Eastern Europeans Should Stay away from American Cars, and Japanese need to stay away from Soviet Cars.
and im not saying all of them are like that.... just watching listings on Craigslist for Audi's, Volkswagen's, Mercedes, BMW's in USA... made me vomit, because i didnt even see a single clean car, and all the riced out hoopties were selling for so much.
@@ChrysGaines I asked cuz your editing is really really good! I noticed the flow in the little b roll, keep it up bro! Also the little jokes here and there, the little memes, really cool! The slower it is, the better 🤣😅
it was an experiment since these are a series of tiktoks/shorts but everyone complains about people breaking stuff into parts 😅 i still have hundreds of hours of RUclips footage to go through and edit from this whole thing
An experiment. i’ve spent days of my life editing these short minute videos together to be fun and retain viewers - why not put them in order? much easier than asking someone to find them all in order on my page. half the people complain about people dragging series out anyways lol
Tiktok/shorts/ IG reels don’t like that 😅 which is why i’ve recorded this entire process on my big camera too. but editing a RUclips video is a lot hard than a 1 minute short, or tossing a bunch of them together for an experiment
this vid was never meant for youtube, it’s a long-form tiktok. but i posted it here as an experiment. seems to have kinda worked out well as my most viewed long vid ever lol. I’m working on regular long form youtube stuff!
Absolute looker, you've done well to tidy up this car and breathe new life into it! Can't wait to see all the mechanical stuff you're have planned for it!
thanks! already did a bunch, but I need to catch up on editing my regular RUclips content so long form + short form are on the same page lol
@@ChrysGaineswhat’s the other page name I’m gonna go head and follow that one too
The cuts gave me seizures
gotta keep retention rates up somehow 😭
@@ChrysGainesyou're better off making a proper video that relying on shorts that bring 0.1% of the revenue you get from an actual video
This is an awesome project. The shorts are what got me here. But longer format slower videos will make me stay. Your doing a great job buddy! Thank you❤ ps... Landscape please
Ew just ew
Would love to see you make a dedicated video instead of taping shorts together but I love the content. You should get a wide body kit and airbag suspension so you can basically set it on the ground.
i’m working on it! i’ve gotten so good at making shorts i need to transfer what i’ve learned over to RUclips vids. but this was an experiment because people on Tiktok always complain about multi-part series, so i stuck all of these vids together and figured i’d test it on YT as well. it’s my best viewed vid by miles haha
We need longer content! Your e36 looks so sick!
The dedication is unmatched🙏🏻
nice video gets me motivated to work on my e46. Keep it up! Saw a lot of negative comments here but i dont know why they hate that vertical video so much.
Lookin clean as hell man. Keep it up. Nothing brings me more joy than seeing old beaters getting a new lease of life.
The base model bumpers are so underrated, they make the car look more sharp
they do if youre blind.
Need full length videos on this project.
Just came across this in my shorts and instantly got attached
Definitely going to sub.
Round rivet nuts will bite you down the line. Good concept But They are really shit after being in the elements for an hour. Use the angular or 6 edged ones. That way the bolts will come out again without just rolling the nut in place.
I want a new car (as project but also as daily) for a very long time but this makes me even more hyped to one day have a project car
this is some good work, gj man
$300 car that runs in 2023? Bro started this 9 days 5 years ago 💀
Love this man keep the videos coming! You got a new subscriber
🙏🏾🙏🏾🙏🏾
Killer build! I watched this video then had to go through and watch all the shorts. Great content!!!!!
youll love the coolerworx shifter. me and my buddies are running them on our e46's on the nürburgring.
If you don't bake the cerakoted parts its basically just painting them. Its ceramic paint that gets very hard and durable after being baked in a kiln.
That’s a different product than the cerakote trim restorer
So cool! 🔥
Looks great, I'm sure there are more bits to be done, but I'm definitely looking forward to seeing that video drop.
Finally a American Car Guy WHO UNDERSTANDS How to Build a German Car.... all these other kids just throw on Massive Wide Stance wheels on there, make the car look like shit, but you actually put Type 32's on there, which is a very commonly used wheel in Europe for E12s,E24s,E28s,E30s,E36s,E46's and such, to make a clean and nice ride.
i often look through marketplaces of various countries.... and i can tell you..... Americans should stay away from German cars (because they dont know how to properly mod them), Germans should stay away from Japanese Cars, Eastern Europeans Should Stay away from American Cars, and Japanese need to stay away from Soviet Cars.
and im not saying all of them are like that.... just watching listings on Craigslist for Audi's, Volkswagen's, Mercedes, BMW's in USA... made me vomit, because i didnt even see a single clean car, and all the riced out hoopties were selling for so much.
Nice work, keep it up!
You need me e36 for 9 days…
Where did you buy the new front bumper? And the all the m trim?
This is my second favorite series bmw
Nice transformation
You got yourself a new subscriber, great work man!
Love to see a full detail and maybe wrap ?
definitely coming up!
A yo kid, am feeling that build... looking good 👍🏽
This guy actually a technichian from other planet
that is a dope transformation
Those seats are amazing.
corbeau killed it 🔥
@@ChrysGaines How do you pronounce that? 😅. English not my 1st language.
Serious question: what does BBL stand for, about cars?
BMW Butt Lift 😂
were can I buy a 323i coupe for 300$ ? I would buy like 3 at least
Nicely done! Bmw isnt my first choice, (bad experiences in the past) , but this is looking nice.
Looks nice.
Good work
Hey bro do you know how can i find the cigarette lighter for the w210 Mercedes
Beautiful 👌🏼👌🏼
can you link the skid plate? cant find it. i have a 96 328is
www.turnermotorsport.com/p-585393-e36-m-skid-plate/?gclid=CjwKCAjwoqGnBhAcEiwAwK-OkdoFJRJGWu4C7XznNLd_yePNgccV2MXNpOPQFCbKhE8euvolTIKx4hoCxZ4QAvD_BwE
100k let's gooooooooooooo
💯💯💯🔥🔥🔥
Where did you get the cf ltw spoiler from?
FB marketplace, guy might be making a new batch soon
E36 hot exhaust valves???
Great job.
Please put part list
Absolutely gorgeous. Is she replacing the Z?
nope! got some more Z content on the way too!
Nice job.
Good job
Was this video shot in like 10 fps?
sounds like a technical issue, looks fine to me lol
Love the channel just subscribed!!! We got the same cars .. I have e36 / 350z!!! 🤙🏼💪
great minds think alike 🔥
she's lookin crispy but now you need a 328i engine transmission swap i reckon
328 engine sounds a bit light on power for my taste 😉
put coil overs?
the car came on coils and i’ve already swapped the Feal’s on months ago
NICE👌🏾
That spoiler 2 stories to tall😂😂
Other then that, awesome build
can you make toyota celica t23 next?
are you gonna paint it?
Can you sell the custom motorsport badges?
Interior please
i actually did the interior months ago! plenty of older shorts on the change, but i’ll be posting long vids soon!
Where did you find m3 for 300? 😮
An empty body at scrap is worth almost that
it’s a salvage 323 that I paid more than $300 for just to avoid haggling. dealership offered me $300 for it
What is name of this bmw model?
E36 323is
Why is this only upright
Love it
Are you editing your own videos?
yea and i'm slow AF with it 😭
@@ChrysGaines I asked cuz your editing is really really good! I noticed the flow in the little b roll, keep it up bro! Also the little jokes here and there, the little memes, really cool! The slower it is, the better 🤣😅
Your production style deserves to stay on RUclips, fuck Tik Tok
eventually i’ll be consistent on both
Wait till you get to the bearings... in the engine
for M52’s bearings are the last thing i need to be worried about lol
Probably would have been able to enjoy this video if it wasn't in ticktock portrait mode
it was an experiment since these are a series of tiktoks/shorts but everyone complains about people breaking stuff into parts 😅 i still have hundreds of hours of RUclips footage to go through and edit from this whole thing
Preferred it stock truth b told
i don’t need another stockish looking car, i wanted to go crazy with this build
300 bucks?? No way
Why would you upload a long form video filmed in portrait
An experiment. i’ve spent days of my life editing these short minute videos together to be fun and retain viewers - why not put them in order? much easier than asking someone to find them all in order on my page. half the people complain about people dragging series out anyways lol
Can we have not vertical
soon!
Tf is that wing
The rear wing is just not looking right
300???? for a rust free coupe and 323is
300$ for that is such cap
Why tho
just keep it oem, looks like a toy car now
just turn your phone when you record .......
Tiktok/shorts/ IG reels don’t like that 😅 which is why i’ve recorded this entire process on my big camera too. but editing a RUclips video is a lot hard than a 1 minute short, or tossing a bunch of them together for an experiment
i would've watched the whole video if it wasn't VERTICAL THE WHOLE TIME. DISLIKED
this vid was never meant for youtube, it’s a long-form tiktok. but i posted it here as an experiment. seems to have kinda worked out well as my most viewed long vid ever lol. I’m working on regular long form youtube stuff!
This was enjoyable as fuck to watch
showcar ? still looks like a piece of junk ...