Harley Davidson Rear Brake Pad Replacement (Roadking/Touring)
HTML-код
- Опубликовано: 5 авг 2022
- Rear pad replacment on an 07 FLHR. Same for many other models. Always check your manual first. Please Like And Subscribe if you find my videos useful. All the best Loco
Thanks bud, just what I needed to know and no BS.
Thank you!!! Very helpful.
Thank you so much. I just got me a 2005 RK and pad was at 1mm; Replaced!
@@Fresh-ld2dm no problem glad it helped you 💪
That sure is a whole lot better than having to take off the entire back wheel. I'll have to try this method. New SUBSCRIBER!! Thanks for this video. 👍🏽🤠 8/10/23
You make it look easy! I'm going to give it a try. Thanks for the video!!!
Super info!!! Thanks a bunch!!! Just when you think your bike is all good to go something creeps up. Just noticed my pads need changing. Lololol
Thanks mate was as instructed.Now the front two sets.
Thank you for this. Really helped with changing. ‘
Your welcome 💪
Great video thank you
Thanks for watching
Спасибо родной🎉🎉🎉
Well done
Thanks for the info, replacing my rear pads today.
Thanks for watching. Good luck wrenching and saving your £ $ €..
@@harleyloco1853 Got them out and got them in. It was a bit of a struggle to open up the pistons but I got it. Just finished my test ride and they work perfectly. Yes, your video saved me some coin too!
@@KodiakCO great to hear buddy
Great video
Thanks for watching Glad you liked it
Thanks.
nice i was thinking i was going to have to remove the rear wheel
A lot less hassle this way. Thanks for watching
Change your tire and your pads at the same time if possible...
HELP? Thanks for the easy video. But ive got a problem. i can not get pads to line up to install brake pad pin. help?
💯👍
Тоже нужно роаести данную экзикуцию) направляющие нужно смазывать?
Wish there was enough room for the new inboard pad to go in.... how do I make more room?
Gotta compress the pistons w a screwdriver
А мне говорили нужно снимать колесо, для замены тормозных колодок.
Did you have the bike on a lift
It's on the floor but a lift will make it hurt less
Hi what's the size of this socket?
1/4 “ 12 pointed socket
@@harleyloco1853 thank you 😊
@@Tigersik1 any time bud
What's the torque at the end ?
@@TxBigfoot 170 200 inch lb the manual states
Having a hard time