Wow. That tool where you pull the springs in place is genius. And, it's exactly what I need. I inherited a cheap couch that had this type of spring in plastic holders. They're not properly secured and one popped off it sideways. The strength in the spring is such that I've been trying to figure out how to extend it back so I can slot it in, almost took out an eye when I lost track of what I was doing and got too close to see what was going on. 😬 Going to whip up a tool like this tomorrow and get it sorted.
I would definitely buy Custom Made Couch from him. Does s nice .Quality job. I replaced springs on my old couch which.tirned out good but the guy who made my Couch couldn't hit the Side of a barn with Nail Staple gun so many Miss's exposed Nails I added Brackets Glued most of Joints Drill holes used Deck wood Screws now it's solid . By watching this guy he knows what he's doing and Takes pride in his workmanship those traits Getting to be Lost cause in USA. Everything Rush half ass. Enjoyed watching video
QUESTION!!!! I've seen some couch-making videos and they use like. . . . I'm not sure of the name but it looks like some kind of a heavy duty nylon strap. I'm wondering: is there any benefit of using these straps vs springs? Or springs vs straps?
Thank You! I want to up-cycle two sectional loveseats into one large banquette seat and was afraid that using springs for the seats would be too complicated but now I see that it is not and your use of a lever to pull them is excellent! Cannot wait to see more of your vids.
I found this video while searching for tips on repairing the couch cushions i currently have. You do a very nice job! I like your custom spring pulling tool! I would love to get the wire clip gun, but i dont have that much to do. Could you recommend a good hand tool for the job? I need to replace a few springs, and run new wire across all the springs.
I love the dedication and quality of your craftsmanship. You rock furniture awesomely. It's natural for you to do a Wonderful skilled job. I admire your work ethics.
How do you measure how long the springs for the seat need to be? Also, in the seat, your outside two springs are closer together, is this just to increase supplier in the edge?
Robert Avery As for springs - Rather than buying pre cut springs of a certain length you can buy a roll which you cut yourself with bolt cutters. E.g. see Heico direct. They also sell 8g and 9g for bottom and 11g for back (some places don’t do 8g). Measure the length between back and front rail and multiply by how many springs you have (can do 4 inch distance rather than 5 if you want more support). Springs will be curved but you also pull them taut so the length between the wood is an accurate guide. That way it’s better to have too much than not enough, and worst case scenario you can give away any remaining length that you won’t use
Oh I see why we were sinking in the couch. The manufacturer didn’t fasten the spring end clip. When the kids jumped on the couch, the springs became unfastened. Also, our couch had way less springs. Almost half. Finally the steel wire clips loosened. The wooden frame started to crack too. I really need to become a carpenter to fix this couch. 😢
Hi, how would you measure the spring for a project? I see that you have to stretch the spring, so are they 2 or 3 inchs shorter than the span they have to cover or only 1"? just wondering how i would get a goo spring length for my seat project. thanks
I was wondering where to buy the green plastic coated wire and what it is called? I have found Edge Wire, but it is short and covered with paper. Thanks
www.alibaba.com/product-detail/Fixing-wire-paper-plastic-covered-used_746119690.html I found this Fixing Wire. It comes in 5 sizes: 1.6mm, 1.8mm ,2.0mm ,2.5mm ,2.8mm. What size do you use for the seat bottom?
you do amazing work plz can you show how to create a sofa bed from old sofa . not click but having back still standing and just pulling out bad from sofa. tnq u
House2Home has instructions and spring length tips that are included with their springs. Plus other supplies your would need! house2home-us.com/collections/upholstery-springs
I am a woodworker, but I would like to build my on furniture (couch, love seat, chair, etc.) Can someone please direct me to a website that has the materials and tools/supplies that I can buy to build these with. Thanks
House2Home has instructions and spring length tips that are included with their springs. Plus all the other materials you would need. You can follow us on FB as well. You can always email us with any questions you might have! We are here for you! house2home-us.com/collections/upholstery-springs
Man I need a manual tool to attach the stay wire clips to the springs - he’s using a pneumatic one with a compressor, the hand tools are like $75, dang I just need to attach one wire. 😢
AI POR QUE VC NÃO FALA PORTUGUÊS? ??? AMO MUITO O QUE VC FAZ POREN NÃO ENTENDO O QUE VOCÊ FALA. QUE PENA PRA MIM MUITO TRISTE MAIS PARABÉNS PELO SEU TRABALHO
try repairing those springs when they break...and they will,it's a nightmare job,not for the faint of heart,most folks just throw away the sofa,i've repaired quite a few in my day and it's not easy,esp to do it correctly,so the repair lasts.
Wow. That tool where you pull the springs in place is genius. And, it's exactly what I need. I inherited a cheap couch that had this type of spring in plastic holders. They're not properly secured and one popped off it sideways. The strength in the spring is such that I've been trying to figure out how to extend it back so I can slot it in, almost took out an eye when I lost track of what I was doing and got too close to see what was going on. 😬 Going to whip up a tool like this tomorrow and get it sorted.
I would definitely buy Custom Made Couch from him. Does s nice .Quality job. I replaced springs on my old couch which.tirned out good but the guy who made my Couch couldn't hit the Side of a barn with Nail Staple gun so many Miss's exposed Nails I added Brackets Glued most of Joints Drill holes used Deck wood Screws now it's solid . By watching this guy he knows what he's doing and Takes pride in his workmanship those traits Getting to be Lost cause in USA. Everything Rush half ass. Enjoyed watching video
alright that custom spring pulling tool was legit. gonna go make one of those right now!
QUESTION!!!! I've seen some couch-making videos and they use like. . . . I'm not sure of the name but it looks like some kind of a heavy duty nylon strap. I'm wondering: is there any benefit of using these straps vs springs? Or springs vs straps?
Thank You! I want to up-cycle two sectional loveseats into one large banquette seat and was afraid that using springs for the seats would be too complicated but now I see that it is not and your use of a lever to pull them is excellent! Cannot wait to see more of your vids.
I found this video while searching for tips on repairing the couch cushions i currently have. You do a very nice job! I like your custom spring pulling tool!
I would love to get the wire clip gun, but i dont have that much to do. Could you recommend a good hand tool for the job? I need to replace a few springs, and run new wire across all the springs.
I love the dedication and quality of your craftsmanship. You rock furniture awesomely. It's natural for you to do a Wonderful skilled job. I admire your work ethics.
How do you measure how long the springs for the seat need to be?
Also, in the seat, your outside two springs are closer together, is this just to increase supplier in the edge?
What is the pneumatic gun that wrapped the copper wire to the springs?
I'd love to have a job like this! It's amazing!
Stéphanie Pir i like u n your coment
Stéphanie Pir k
Cactus&Salad . Hello
Check my chanal watch Gold Bed video
Hmm
How do you determine the length of the springs and what type of lumber is the frame made of. Thanks nice video
Robert Avery As for springs - Rather than buying pre cut springs of a certain length you can buy a roll which you cut yourself with bolt cutters. E.g. see Heico direct. They also sell 8g and 9g for bottom and 11g for back (some places don’t do 8g). Measure the length between back and front rail and multiply by how many springs you have (can do 4 inch distance rather than 5 if you want more support). Springs will be curved but you also pull them taut so the length between the wood is an accurate guide. That way it’s better to have too much than not enough, and worst case scenario you can give away any remaining length that you won’t use
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
Could you change a chair from coil springs to those type of Springs?
Nice,
Can you link the spring bending gun...thx
You are teaching me Sir!
YOU DO A BEAUTIFUL JOB.
Hello! Was the spring stretcher made with a pegboard hook?
I know that staples are quicker, but why not fix the spring clips with screws?
How do we choose the spring length
Oh I see why we were sinking in the couch. The manufacturer didn’t fasten the spring end clip. When the kids jumped on the couch, the springs became unfastened. Also, our couch had way less springs. Almost half. Finally the steel wire clips loosened. The wooden frame started to crack too. I really need to become a carpenter to fix this couch. 😢
Did you do it
Thanks bud, very helpful 👍
hello sir, do you need a seat upholstery master?
Hi, how would you measure the spring for a project? I see that you have to stretch the spring, so are they 2 or 3 inchs shorter than the span they have to cover or only 1"? just wondering how i would get a goo spring length for my seat project. thanks
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
I was wondering where to buy the green plastic coated wire and what it is called?
I have found Edge Wire, but it is short and covered with paper.
Thanks
www.alibaba.com/product-detail/Fixing-wire-paper-plastic-covered-used_746119690.html
I found this Fixing Wire. It comes in 5 sizes: 1.6mm, 1.8mm ,2.0mm ,2.5mm ,2.8mm.
What size do you use for the seat bottom?
How do you determine the length of the springs.Thank you!
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
you do amazing work plz can you show how to create a sofa bed from old sofa .
not click but having back still standing and just pulling out bad from sofa.
tnq u
do you have a special store you buy all you stuff from to redo furniture
House2Home has instructions and spring length tips that are included with their springs. Plus other supplies your would need!
house2home-us.com/collections/upholstery-springs
hi. can u do a sofa wood frame and what is the good design to easily install foam and to upholster..
What gauge spring did you use for the seat
2:43 what is the thickness of the springs u use?
I am a woodworker, but I would like to build my on furniture (couch, love seat, chair, etc.) Can someone please direct me to a website that has the materials and tools/supplies that I can buy to build these with. Thanks
House2Home has instructions and spring length tips that are included with their springs. Plus all the other materials you would need. You can follow us on FB as well. You can always email us with any questions you might have! We are here for you!
house2home-us.com/collections/upholstery-springs
What is the name of this tool that you used to attach this green cord to the spring? and this green cord is what?
vertexfasteners.com/detail/proclinch-4-5
I search for ProClinch and found this which looks like the tool used in the video.
Hi what’s the stapler model ?
what size staples to use?
4:01 what is the machine name
What is name this spiring please replie me
That background music though 🔥👍🏾
where do you buy the springs
Man I need a manual tool to attach the stay wire clips to the springs - he’s using a pneumatic one with a compressor, the hand tools are like $75, dang I just need to attach one wire. 😢
Who is the best spring for the chair Zig Zag Springs or Spiral spring ?
Zig Zag! House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
that was awesome you have inspired me to go on and try and do this
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
Plz i want pin remover onlin Amazon
Thanks
formidable usted es un genio gelicidades
Из какого дерева сделан каркас ?
AI POR QUE
VC NÃO FALA PORTUGUÊS? ???
AMO MUITO O QUE VC FAZ
POREN NÃO ENTENDO O QUE VOCÊ FALA. QUE PENA PRA MIM MUITO TRISTE
MAIS PARABÉNS PELO SEU TRABALHO
Good job
try repairing those springs when they break...and they will,it's a nightmare job,not for the faint of heart,most folks just throw away the sofa,i've repaired quite a few in my day and it's not easy,esp to do it correctly,so the repair lasts.
good work
And thanks sir
excelente!! trabalho parabéns!!!
Very good!
Thank you!
nice work........
Im planning to make own business like this....
IT is my plan too, underway anyway
AmAzInG!!!!!
I am big fan only for you
Jaik
super
EMIN ABBASOV pin
5 cm ??
nope, 5 inches. In cm it'll be 12,7cm :)
muito bom!
Hermoso
PRO GOOD!
je veux parler avec vous
beauty
Poor back..
ggggooooooddddd
It looks crap..
Where do buy the springs from